Hi
How do I turn usb on in kernels for smargo ?
I was on DE before with CCcam 2 1 4 and was ok
Hi
How do I turn usb on in kernels for smargo ?
I was on DE before with CCcam 2 1 4 and was ok
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
mmmm
Things like this should be in the write up,
now I cant share my cards and would have held off if known.
canthackit (08-09-10),DrProzac (08-09-10)
Theres nothing stopping you installing the drivers youself, they're on this board if you search
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
canthackit (08-09-10),DrProzac (08-09-10)
They're in the attachment in this thread, use the DM7025 drivers and read the readme for how to install http://www.vuplus-support.co.uk/show...ghlight=smargo
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
malsat (08-09-10)
And at the same time, dream-elite is a long way off all the others as they are the old oe, cannot use newer drivers, etc, etc...
As Sic says, try installing manually.
We haven't been in the game anywhere near as long as dream-elite have.
We haven't had the support from vuplus like what de had.
This has all been done off our own back...
We aren't even saying we are better or as good as dream elite. We are an alternative. Use the image if you like it, if not don't...
I do wish people would stop being overly critical.
I think this image is brilliant, and for a first image it amazing what has been put in, in so little time.
If you like the DE Image go back to it, there nothing stopping you!
I for one appeciate all those who have been involved in creating a wonderful image, and hope some of the comments I have read do not put the team off further development!
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
canthackit (08-09-10),pooface (08-09-10),Sicilian (08-09-10)
canthackit (08-09-10),paul362 (09-09-10)
Yes, the developers have done a tremendous job! Please do not make any "shortcuts" with this image, just because people have forgotten their manners!
Be a little "strict" in the coding, and you will earn a lot later, it being quicker bugfix'es or faster plugin development+++
I think a "bug thread" should be opened & made a sticky. Perhaps fastened right above the "normal threads" section
/Yngve
delahzo (12-09-10)
Planning to load the VIX image at the weekend.
But looking at the Smargo Drivers as Sic mentions above.
The folllowing text is n the readme file.
************************************************** *************
* *
* DM7025 for use with any (current) image *
* *
* Instructions for installing kernel modules/ftdi driver. *
* *
* Install all 3 attached packages: *
* *
* telnet [ipadreambox] *
* *
* ipkg install kernel-module-ftdi-sio_2.6.12.6-r7_dm7025.ipk *
* ipkg install kernel-module-usbcore_2.6.12.6-r7_dm7025.ipk *
* ipkg install kernel-module-usbserial_2.6.12.6-r7_dm7025.ipk *
* *
* edit the file (use vi or ANY other editor): *
* *
* /etc/init.d/bootup *
* *
* Change: *
* *
* echo 52 > /proc/progress *
* modprobe ohci-hcd *
* *
* to: *
* *
* echo 52 > /proc/progress *
* modprobe ohci-hcd *
* modprobe ftdi_sio *
* *
* save the file and reboot the dm7025! *
The install ipk bits are fine. But the editing of the boot file is where I have issue.
It says add this text to the file.
* echo 52 > /proc/progress *
* modprobe ohci-hcd *
* modprobe ftdi_sio
But when I check the boot file on my current PLi install where the smargo works already there is no mention of any text like this.
Is it just a different version of the driver or a different way to install it because its from the plugin menu in PLi.
D
This is something I'll have to try looking at, time has been an issue last couple of days.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
I will continue with VIX at w/e and test as per instructions and report back then...
D
It says add this text to the file.
* echo 52 > /proc/progress *
* modprobe ohci-hcd *
* modprobe ftdi_sio
I Cant locate this in the VIX ,
Anyone know where it is ?
installed ok but not seeing smargo