Please could someone explain how to change the bootlogo on my ET9000 i have downloaded a bootlogo but don't know how to upload it to the Clark-tech
Thanks in advance..
Rgds.Tryharder
Please could someone explain how to change the bootlogo on my ET9000 i have downloaded a bootlogo but don't know how to upload it to the Clark-tech
Thanks in advance..
Rgds.Tryharder
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
Thanks for the reply Silverfox..I had read the post previously but I am a simple man and require leading by the nose Do i use DCC to upload it to the receiver and if so...How?
I apologise if the answer is obvious but if there is a way of doing it and it is posted in simple terms and if indeed other files are loaded in the same manner people can read and learn as I am trying to do...Thanks once again for taking the time to reply it is appreciated.
rgds.Tryharder
youi can use DCC or you can use Filezilla
loginto box ip either way above
and navagate to the folders mentioned bellow
usr/share/
usr/share/enigma2
within usr/share you add bootlogo.mvi,backdrop.mvi,bootlogo_wait.mvi and switchoff.mvi
within usr/share/enigma2 you add radio.mvi
and thats it
when you restart you will see new logos
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
Excellent HOW TO Silverfox thankyou................I used DCC exactly as you said.......right clicked and clicked on EDIT.... a small box zipped open and closed.....showing a window with a load of hyroglyphics so i clicked save and exit after each EDIT....rebooted the box anddddddddddd...........yep.....still got the Vix background which says.....OPENVIX....EXTREND....ET-9000...loading
I wasn't sure how to load it using filezilla so i gave up......
Sorry to be a pain mate....but i must have done something wrong and iv'e done it about 6 times just to be sure .......what do you reckon?
Thanks.......
rgds.Tryharder
not sure What u did there
all you need to do is in dcc go to ftp tab
navigate to the folder in receiver
then from pc side on left of ftp open up the bootlogo folder to show you all mvi files
then one by one send them accross by clicking the arrow
and they will transfer accross
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
Yessssssssssssssssss It's took me 3hrs and about fifty goes but i have managed thanks to your explanation. Thanks a lot.......Is this method used to write other files to the box????
Just so I get to understand how to navigate around the box and get the best use out of it........Thanks again for giving me the time mate..
Best regards. Tryharder
yes thats pretty much how you navigate around the box's internal file structure, although i would recommend that you should really move to a dedicated FTP program to do this kind of thing.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
as pheonix states use something like filezilla WINCP or FlashFXP its far better than DCC
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓