http://www.openvix.co.uk/openvix-bui...mbohdd_usb.zip
Sorry, that's the other TV pic I'm looking at to determine the gap in the live pause. This is the correct image I'm using.
That sounds like you are using OpenATV not OpenViX?
You can download OpenViX from www.openvix.co.uk
Just a little confused now is the timeshift issue showing in ViX and ATV or just one or the other, if so which one?
Last edited by Satzone; 08-08-19 at 23:43.
In the OpenVix 5.2 .045
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
These are my settings. Apologies for the confusion with the OpenATV info.
IMG_20190809_084444.jpgIMG_20190809_084517.jpgIMG_20190809_084715.jpg
Here you say you are have a Toshiba PCL200 500 GB internal HDD. HDWK105. Why aren't you using that as the HDD with ext4 format?
I had a big problem over the weekend because I was using a very slow USB stick.
I use usb stick primarily for my picons, and settings backups - other people can comment (I don't use timeshift) but I would put timeshift on your internal HDD.
It means setting up ext4 on teh internal HDD and then reset the usb stick mount to usb (use MountManager)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Looks like a possible bug, not sure if openvix or drivers. Need to look further. Work around as follows:
Set timeshift to 10 seconds ( that's what I normally use, you could set higher).
If you want to pause live TV, wait at least the 10+ seconds.
Press Pause then directly after press Play and then Pause straight away.
We'll need to check, but busy at the moment working on next OpenViX release.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
So am I the only person experiencing this problem? Does live pause work for everyone else? Maybe I haven't set it up properly. Just in case, here's what I did.
I fitted the 25 Toshiba SATA drive inside my Amiko Viper Combo HDD. I powered the box and selected the initialise option. I formatted the drive and all wen well. Some people say I should also convert the files from ext3 to ext4 using the box also. any other advice much appreciated.
Once initialised did you setup your Mount point?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
No, I did not. Should I have? or how do i do that?
Thanks,
When I’ve initialised any HDD to Ext4, I then Mount using Blue button > ViX > Mount Manager. You need to highlight your HDD then I Setup Mounts. If done correctly, it will say your Receiver needs to reboot/restartGUI etc.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Only 2 points for me as a/ When I initialise the HDD on my receiver it automatically formats to Ext4 and then b/ Setup Mount
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)