You are using the Tiviar ip address??
You are using the Tiviar ip address??
Running ABM is going to be pointless for you as you will have lots of services you cannot receive.
You will be better off using the Terrestrial scan plugin.
If you want to persist with ABM use the frequency finder within ABM.
Two things odd about that.
- It mentions FreeSat, but you have FreeView.
- It looks like style-sheets are inactive, but even then it isn't OpenWebIF with no style sheets, as that look like this:
Screenshot_20180907_020052.jpg
I'd uninstall the thing you installed that you thought was "webif" and see what happens.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Vu+ UNO 4K SE - LAN
Tiviar Alpha+ Plus - LAN
3 PC's (two Win 7, one Dual Boot XP/Win 7 All with Hot Swap HDD Bays & LAN connected
Netgear NAS 2 x 2TB Drive on same LAN
Zone 2 Sky Dish (not connected) Triax 1m Dish - OCTO LNB
The whole point about the Vix system is it is supposed to work on this machine - it strikes me that there are so many faults with this system it seems pointless wasting my time trying to get it working. Has anyone actually tested Vix on the Alpha+ and got it to work without any glitches?Running ABM is going to be pointless for you as you will have lots of services you cannot receive.
Vu+ UNO 4K SE - LAN
Tiviar Alpha+ Plus - LAN
3 PC's (two Win 7, one Dual Boot XP/Win 7 All with Hot Swap HDD Bays & LAN connected
Netgear NAS 2 x 2TB Drive on same LAN
Zone 2 Sky Dish (not connected) Triax 1m Dish - OCTO LNB
I do actually have both Freesat and Freeview and the whole point about this thread is that ABM comes up with a fault when I try to get it work with both Freesat and Freeview.It mentions FreeSat, but you have FreeView.
Vu+ UNO 4K SE - LAN
Tiviar Alpha+ Plus - LAN
3 PC's (two Win 7, one Dual Boot XP/Win 7 All with Hot Swap HDD Bays & LAN connected
Netgear NAS 2 x 2TB Drive on same LAN
Zone 2 Sky Dish (not connected) Triax 1m Dish - OCTO LNB
I’ve setup a few Alpha+’s for friends and works fine with ViX. I’m guessing you are new to all this and basically gonna be trial n error for you. We’ve all been where you are and in time I’m sure you will grasp it, just gonna take time.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
I dont mind 'Trial and Error' approach but when nobody is able to tell me what the cause of my glitches are then I have to assume that there are serious flaws in the Vix system.
Should Vix/ABM work with both Freesat and Freeview on the 3 tuners that are on the Alpha+ system - did you actually test that on the Installations that you setup.
I can accept that I made a goof on the Unicable purchase and I just hope the the new box that I have just purchased off WoS is not going to give me the same problems that Im having with the Alpha+
Vu+ UNO 4K SE - LAN
Tiviar Alpha+ Plus - LAN
3 PC's (two Win 7, one Dual Boot XP/Win 7 All with Hot Swap HDD Bays & LAN connected
Netgear NAS 2 x 2TB Drive on same LAN
Zone 2 Sky Dish (not connected) Triax 1m Dish - OCTO LNB
The page shows that only the DVB T option has been set for the system parameter so its only picking up standard definition (SD) cannels trmasmitted on DVB T
If that option were set to DVB T2 or Auto a lot more channels should be found including all of the High Definition (HD) channels and all those SD channels braodcast on DVB T2
Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)
duplicate deleted
Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)
Go to menu, plugins, and click on the webif to bring up the configuration page
For the option that says "new inteface" say NO
Press geen to save
You may have to reboot your box
You should now get that webif as shown in this thread.
The new interface requires another utility to be installed on your box. I remember someone posting the link fairly recently but cannot find the relevant posting at present.
Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)
Hebridean (07-09-18)
What do you want to address?
Webinterface or AutoBouquetsMaker?
We can get ABM to work for you. I have already posted part of solution for you. If it did not make sense, say so.
The mistake you made with unicable is easy to rectify, ensure both satellite tuners have a signal wire.
Personally, I don't go through the webinterface to get screenshots. Have a look at link in my signature. I'm in agreement with ADM, I suspect you enabled the new theme in OpenWebIf.
Now that the webif issue is resolved I will take a look at the AutoBouquetsMaker issue and let you know if what you have suggested doesnt make sense to me.We can get ABM to work for you. I have already posted part of solution for you. If it did not make sense, say so.
Thanks, Pete
Vu+ UNO 4K SE - LAN
Tiviar Alpha+ Plus - LAN
3 PC's (two Win 7, one Dual Boot XP/Win 7 All with Hot Swap HDD Bays & LAN connected
Netgear NAS 2 x 2TB Drive on same LAN
Zone 2 Sky Dish (not connected) Triax 1m Dish - OCTO LNB