i have extracted the the given file to abm/provider...i have scaned after selecting MKTEST AREA netid,s are frequencies if im correct, tried four five of them, all give TIMEOUT FOR TUNER LOCK ISSUE.
i have extracted the the given file to abm/provider...i have scaned after selecting MKTEST AREA netid,s are frequencies if im correct, tried four five of them, all give TIMEOUT FOR TUNER LOCK ISSUE.
There are 50 frequencies for you to try.
i have tried all the frequencies only
658750 gives 3 channels
674750 gives 21 channels
all other TUNER LOCK TIMEOUT
Can you also upload the bouquets that you have after using Lraizer's plugin for cable please.
Also, what is the driver date of the image you are currently on.
log report for frquencies 658750 & 674750
abu baniaz (24-01-15)
there were quite few in etc/enigma2 these are for cable,
image driver date is 2015-1-5
abu baniaz (24-01-15)
Please try this reader.
It makes dump files in /tmp after reading NIT and SDT tables from provider.
post the log files pls.
Vu+ Duo2, OpenVix, 3xdvb-c
Vu+ SoloSE V2, OpenVix, 1xdvb-s2 , 1xdvb-c (Sundtek)
Vu+ SoloSE V2, OpenVix, 1xdvb-c
Vu+ SoloSE, OpenVix, 1xdvb-c
ET6500. OpenVix, 1xdvb-c
Motor 1m dish
abu baniaz (05-03-15),MK (06-03-15)
log file after FTP dvbscanner.py file to ABM/scanner on VIX image, only found 2 channels
Last edited by MK; 06-03-15 at 18:21.
also i added dvbscanner.py file to existing image openatv, scan went fine ABM found all the channels. this is the log file for openatv image ABM.
there also should be log files in /tmp.
pls also post these log files from both images.
nit_content.log
tmp_services_dict.log
bat_content.log
Vu+ Duo2, OpenVix, 3xdvb-c
Vu+ SoloSE V2, OpenVix, 1xdvb-s2 , 1xdvb-c (Sundtek)
Vu+ SoloSE V2, OpenVix, 1xdvb-c
Vu+ SoloSE, OpenVix, 1xdvb-c
ET6500. OpenVix, 1xdvb-c
Motor 1m dish
openatv tmp/ logs
openvix vix after ftp the give (dvbscanner.py) file to abm/scanner. did two scans on on sky and ireland, which went fine. 2nd scan was on cable which gave "cannot read data" error.
If I understand correctly your issue now is you cannot scan cable, but sat scanning is ok?
This is very strange.
It looks like you have less signal on the dvb-c tuner when you are using a Vix image.
It cannot read the content of the dvb-c stream.
You have some errors in the vix image.
Can you do a fresh flash without restore and try again?
Last edited by Peterj; 08-03-15 at 09:41.
Vu+ Duo2, OpenVix, 3xdvb-c
Vu+ SoloSE V2, OpenVix, 1xdvb-s2 , 1xdvb-c (Sundtek)
Vu+ SoloSE V2, OpenVix, 1xdvb-c
Vu+ SoloSE, OpenVix, 1xdvb-c
ET6500. OpenVix, 1xdvb-c
Motor 1m dish
MK (09-03-15)
I don't have any issues on other images, auto scan gets all the channels, and ABM find all the channels as well on other image.
I'll upload fresh logs tonight
FIXED.. your right was having signal issues on one or two channels so checked the joints which were right next to ELECTRIC METER, moved it away from the meter and all scan went well. can confirm now after scanning 3-4 times, it was the because of the meter right next to joint.