Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 1 of 1

Thread: Backup Image VIX Team ET-9000 v2.1

  1. #1
    bassethound's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    May 2010
    Location
    North West
    Posts
    5,719
    Thanks
    6,871
    Thanked 6,130 Times in 2,737 Posts

    Backup Image VIX Team ET-9000 v2.1

    This backup image is not made by the VIX team or supported in any way by us!!!!!!!!!!


    First, a new image to the usb install the latest version of cihazımıza: ET 9000 Software Installation (with USB)

    After installation to be done after the installation settings:: ET 9000 Initial Installation Settings

    Seçilidi HDMI.
    1080i is selected.
    Turkish language was chosen.
    DHCP on the network.

    At the point where you can search the channel or canal Stock List can install this. If you want to call before you'll need to channel tuner settings.

    ET 9000 Tuner configuration

    For this review the following topic: ET 9000 Channel Search Works

    We check the setting network.

    Menu> Setup> System> Network in the "Network hardware settings" kumandamızın point to the "OK" button.

    Under the section for the current settings by getting the IP address of shout. (Channel settings when you install will have to get back the value of the rope.)

    Now you can install Channel Settingimizi.

    ET 9000 Channel & favorite Regulatory Operations, Ready-Channel List Load


    Twin VU + Duo & Solo & Xtrend ET-9000 HDTV Channel Setting 07-04-2011 (@ galaxy2002) Channel setting is loaded.

    Do not forget to reboot after installing the device channel settings.

    Menu> Setup> Satellite configuration> Tuner Tuner settings: Settings section to come.


    Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °

    Note: Notice that after you install the tuner ayarlamızı have made our list before the channel. Thus, due to the possible setting names of different satellites have prevented errors in the satellite broadcasting can be taken.


    Menu => Add-ons => Green Button (Download Extension) a pressed.
    Extension information indiriliyor.Lütfen wait ... Plug-ins will be seen after a period of warning in case of Categories.


    The downloadable add-ons => systemplugins autoresolution established under
    The downloadable add-ons => systemplugins established under the setpasswd.
    The downloadable add-ons => under extensions permanentclock
    The downloadable add-ons => simplerss established under extensions
    The downloadable add-ons => virtualzap established under extensions
    The downloadable add-ons => vlcplayer established under extensions
    The downloadable add-ons => weatherplugin established under extensions

    Emu are doing the installation:

    wixcam.rar file included in the download folder "enigma2-plugin-cams-cccam.2.2.1_mipsel.ipk" file via ftp device, / tmp folder are sending below. Menu> Setup> VIX> IPK installer to come and "enigma2-plugin-cams-cccam.2.2.1_mipsel.ipk" We see the file. Kumandamızın the OK button (or pressing the green button kumandamızdaki) by pressing the yes on the question while we do the installation by pressing the OK button kumandamızın. Re-confirm başlatmayıda.

    Enigma2-plugin-cams in the same way that we do-mgcamd.1.35a_1.0-r3_mipsel.ipk installation.

    mg_cfg file: / usr / send keys under.

    Cccam.cfg file / etc folder is located. This file server uses the inside of our knowledge is required.

    CCcam 2.2.1 Established | Established 1.3.5a Mgcamd | B***** Patch For File loaded.
    Patch File for B***** Load:
    Patched by pinkyto0o B*****com mgcamd_1.35a would remove enigma2 download and unzip. Unzip the folder in the extracted
    mgcamd_1.35a file via ftp / usr / softcams taking the bottom.
    making the value of chmod 755.


    Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
    To set up Hacksat telnette


    Export MALLOC_CHECK_ = 0
    opkg install-force-overwrite / tmp / Hacksat *

    give the command.

    When you want to install plugins as external. Ipk file via ftp to / tmp after kicking
    Menu> Setup> VIX> IPK installer to come and we want to set up even though the file was selected Kumandamızın after seeing the OK button (or pressing the green button kumandamızdaki) by pressing the yes on the question while we do the installation by pressing the OK button kumandamızın.

    tunisiasat manager_3.0 download-addons-founded.

    WebMedia plugin was downloaded. (@ Niendorfer)


    Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    set-up service is started: Kanal D

    This backup image is not made by the VIX team or supported in any way by us!!!!!!!!!!



    USB
    Code:
    http://hotfile.com/dl/116569380/0df7a53
    All PM,s asking about c/s on cable will be ignored and reported to forum staff!

  2. The Following 2 Users Say Thank You to bassethound For This Useful Post:

    Enzo (03-05-11),Sicilian (04-05-11)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.