After looking at this dish on the forum iam interested in upgrading my current triax 1.1 can anyone tell me if it would make any real difference for fringe reception,can you run it off a technomate tm 2600 motor and finally where can I get one in the UK new or old thanks
Not sure what sort of mount a laminas 1.2 comes with, but we've emailed them for details and asked if they have a UK distributor.
Official Sponsor of the OpenViX TeamOfficial Distributor of Formuler products, GiGaBlue, Octagon,
Technomate, Tiviar, VU+, Xtrend and many more...Secure online ordering - Paypal and all major cards accepted - Order online 7 days a week!PRICE MATCH PROMISE - WE'LL TRY TO MATCH ANY UK PRICE**SEEN ANY PRODUCT CHEAPER? CONTACT US AND WE’LL TRY TO MATCH LIKE FOR LIKE!
Hi,
As a Laminas 1.2M owner, I can confirm that the OFC 1200 comes with an A/Z mount. I have it running on a Clarke Tech motor but as long as you use a reputable metal geared motor you should be ok. I'd not recommend mounting your set up above the gutterline of your house, due to the size and wind loading on the dish. Mine is in a quite sheltered spot.
I really don't think there is a UK distributor for these dishes which is a shame. I obtained mine from a supplier here in France.
DrHD F15 on a 1.2M Laminas dish with a Clarke Tech Diseq motor58°E to 24.5°W
Vu+ Solo on a four dish multisat set up.15 sats, 30°W to 45°E
as far as i cansee it uses the same A/Z mount that a williams raven channel master uses
3 inches
and yes no dealers in UK
Code:http://www.laminas.com.pl/english/index_en.html
Last edited by silverfox0786; 04-05-11 at 01:18.
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
They sell a AZ/EL mount suitable for a standard diseqc motor.Originally Posted by silverfox0786
We've been in contact with the Polish supplier with view to pricing etc... @ Jcm if your still after one of these please send us a pm.
Official Sponsor of the OpenViX TeamOfficial Distributor of Formuler products, GiGaBlue, Octagon,
Technomate, Tiviar, VU+, Xtrend and many more...Secure online ordering - Paypal and all major cards accepted - Order online 7 days a week!PRICE MATCH PROMISE - WE'LL TRY TO MATCH ANY UK PRICE**SEEN ANY PRODUCT CHEAPER? CONTACT US AND WE’LL TRY TO MATCH LIKE FOR LIKE!
bassethound (04-05-11)
This is what the AZ/EL mount looks like installed on a diseqc motor.
DrHD F15 on a 1.2M Laminas dish with a Clarke Tech Diseq motor58°E to 24.5°W
Vu+ Solo on a four dish multisat set up.15 sats, 30°W to 45°E
bassethound (04-05-11),Sicilian (04-05-11)
Thinking of getting one of these dishes myself to replace my Triax 1.1m.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
It replaced my Gibi 1M and there was quite a bit of difference. Actually, I don't really like the design of the mount, it makes it awkward to tighten on the motor stub. Other than that the dish face itself is light and seems sturdy. For it's price, I think it's a good buy.
DrHD F15 on a 1.2M Laminas dish with a Clarke Tech Diseq motor58°E to 24.5°W
Vu+ Solo on a four dish multisat set up.15 sats, 30°W to 45°E
Sicilian (04-05-11)
looking at getting one of those laminas ofc 1200 - anyone selling them in the uK>
Posting Permissions
Reply With Quote
