Sf8008 Vix Night Hd Skin issue

[mp1978]

I switched from Vu+ Solo2 which was running Openvix 6.3 to Octagan Sf8008.

I always use Vix Night Hd Skin. But on Octagon Sf8008, the words are over lapping. Please see image.

I have tried osd positioning. I have put openvix on 2 slots and tried different settings but with no luck.

Any suggestions please.

AEC9EE9F-F550-44B8-89B1-814E7C5C3498.jpg

[cactikid]

Might you have tried another skin like simple 1080.

[Huevos]

I switched from Vu+ Solo2 which was running Openvix 6.3 to Octagan Sf8008.

I always use Vix Night Hd Skin. But on Octagon Sf8008, the words are over lapping. Please see image.

I have tried osd positioning. I have put openvix on 2 slots and tried different settings but with no luck.

Any suggestions please.

AEC9EE9F-F550-44B8-89B1-814E7C5C3498.jpg

This is because you switched from a 1080 skin to a 720 skin without doing a full reboot.

Just do a full reboot and it will be fine.

[bellejt]

not right.I have the same problem and skin was always 1080p 50hz .Also on night HD.

[Huevos]

not right.I have the same problem and skin was always 1080p 50hz .Also on night HD.

What's not right? This is a 720 skin.

[bellejt]

and this is vix night HD 1080p

vixnight HD1080.jpg

[Huevos]

and this is vix night HD 1080p

vixnight HD1080.jpg

We don't support a skin named "vix night HD 1080p" so you're on your own with that.

And by the way it is obvious that you have just switched skins from S1080 because those buttons belong to S1080.
https://github.com/OpenViX/skins/blo...tons/key_1.png

[bellejt]

skin is vix night Hd and setup box is on 1080p and shows like picture and same as topic starter.This started a few images ago on SF8008 .On my duo 2 all is fine with same skin

[Huevos]

1080p has nothing to do with the skin. Do a full reboot.

[mp1978]

1080p has nothing to do with the skin. Do a full reboot.

I am sorry to ask a silly question but what is a full reboot?

I switched off the receiver few times and turn it back on and pressed start and reboot options few times. with no luck.

Do u mean do a factory reset on vix image?

[abu baniaz]

Reboot = Reboot receiver (what is meant above by full reboot)
Restart GUI = Restart Enigma2

restart menu.jpg

If you have rebooted the box, best you attach your debug log.
Menu > Setup > System > Logs > Settings

debug.jpg

You will need to restart your receiver (GUI restart is fine) for change to take effect. If you have IPTV or wi-fi password, remove them from your logs before attaching/posting to forum.

To attach items (if you need the guide):
https://www.world-of-satellite.com/s...o-attach-files

[widar]

skin is vix night Hd and setup box is on 1080p and shows like picture and same as topic starter.This started a few images ago on SF8008 .On my duo 2 all is fine with same skin

I have the same problem on Zgemma 9hs, and the progressbar in videoplayer shows only half the bar. started at same time a few images back.

[bellejt]

just done full reboot and no change

[mp1978]

Here is the recent debug log.Enigma2_debug_2023-04-01_13-44-48.log

[malcolmp]

Hi, Gigablue UHD UE 4K, same here. Rebooted, Restarted GUI, same thing, sometimes OK, other times menu as in post no7.Plus Jedi Maker Xtream acting strange (Playlist>playlist name>continue>info>screen locks. Have to reboot and after start, menu as in post no7. Tried back vix 6.3.002 same results. Gone back again to 6.3.005.