Here are screen shots of Tuner settings.1_0_19_2865_7FE_2_11A0000_0_0_0_20230321141232.jpg1_0_19_2865_7FE_2_11A0000_0_0_0_20230321141041.jpg
Here are screen shots of Tuner settings.1_0_19_2865_7FE_2_11A0000_0_0_0_20230321141232.jpg1_0_19_2865_7FE_2_11A0000_0_0_0_20230321141041.jpg
Diagram as requested.Satellite setup.jpg
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
So you have a FIXED dish with Single Unicable feed connected to the TOP input of Tuner Module A? LNB = Inverto IDLU-32UL40-UNBOO-OPP?
Tuner Module B is not clear, do you have TWO dishes connected to this or only 1 motorised dish? LNB = Inverto IDLB-TWNL40-ULTRA-OPP Twin LNB 40mm 0,2dB Black Ultra?
Please clarify.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Tuner A from fixed dish as you say.
One motorised dish with twin outputs, one feed to Tuner B and the other to a Fransat box.
The only limitation is I can only record one channel at a time when using the motor. In other words I have to choose which satellite I want to record from. The limitation does not apply to the FBC Tuner on 28.0 where I can record many different channels.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
abu baniaz (22-03-23)
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
I am not posting Tuner A as this fixed LNB to 28.0 is working perfectly.
Tuner I and J are shown in attachments.
K to P all show FBC Automatic and Inactive.1_0_19_2865_7FE_2_11A0000_0_0_0_20230322144209.jpg1_0_19_2865_7FE_2_11A0000_0_0_0_20230322144304.jpg
Sorry can't help unless you post all your tuner settings. Also i've already advised you that you must NOT have 'second cable from motorsised LNB' as it's not connected to the tuner module.
Post all your tuner settings otherwise its pointless this thread going any further.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
FBC refers to Tuners on box not the LNB on dish. The one you have on 28.2 is a Unicable LNB. No matter, as that is not the problem. You are also referring to the tuner slots, not actual tuners.
Can you please clarify following:
The wire from motor, which receiver does it go to? Which card? Which socket (top or bottom) ?
The wire that is on motorised dish, but direct from LNB, which receiver does it go to, which tuner module, top or bottom socket?
If you have the motor cable hooked to your tuner I, and there is no wire hooked up to Tuner J, as mentioned twice, your tuner J is configured incorrectly. If there is no wire to it, set it as not configured for now.
Last edited by abu baniaz; 22-03-23 at 18:22.
Sicilian (22-03-23)
Ping Abu
You have confirmed my configuration. I accept that Tuner J settings were incorrect and have altered that to read 'not configured'. I have maintained all along that the setup has worked perfectly for some years. Sicilian kept asking about tuner settings when I knew there was a hardware fault.
I have changed the motorised tuner to a new dual universal LNB and that has cured the problem of 'blank screens'.
Thank you.
abu baniaz (27-03-23)
Glad you are sorted. When more than one issue is involved, it is always easier to solve the software issue first. I am pretty sure once you had confirmed that the software/config error was corrected, Sicilian would have gone on to the next step in in diagnosis. He is far more experienced than me. As with many reception issues, it is usually a process of elimination.
I would add that just because something works, it does not mean it is correct. Number of posts on another forum where people use "equal to" when they only have one signal wire on a multi tuner receiver is too frequent. But they are adamant it works and correct.
cactikid (27-03-23)