2nd cable of motorised LNB.Originally Posted by deltec
deltec (14-03-23)
Why do I need a unicable lnb. When a normal lnb works etc uv lost me I’ve 1twin lnb from 28 dish to ultimo for watching and recording then I’ve got a twin lnb from motorised dish for watching and recording then all I need is one more dish
Last edited by deltec; 14-03-23 at 20:37.
What difference is a unicable going to make to my set up could u explain I can watch and record
I have already answered the question as to what difference a Unicable LNB will make. I even posted a link to one of the guides. If it isn't clear, please say what you understand and where it stops making sense.
I also suggested that you move the wires at the back of your receiver around so that you make the most of your equipment. Other than moving cables around and then changing tuner configuration to match, there is not much involved.
deltec (15-03-23)
So u saying I’ll be better of with a unicable lnb than a twin lmb can u record using a unicable lmb with just one wire connected to the resever I thought u had to have 2 wires connected so u can watch the same satllite and record off it on another Chanel is that right what difrence dose a unicable lnb make
How do I set up my motorised dish using a unicable lnb or just u use a double lnb for recording etc what do u mean move my wires around to make the most of my box A&B tuner connected to my motorised dis for watching Tv programs and recording off the same satllite what’s rong with the set up as for 28 east the set up is twin lnb for watching Tv and recording from the same satllite
Last edited by deltec; 15-03-23 at 05:45.
My motorised dish is set up to tuner A how do I set tuner B up to record do I just set up equal to tuner B is that right
Sorry, I am not going to spend my time repeating myself with you. Please do the following for now:
Move the wire from motorised dish to Tuner I.
Move the two 28.2 wires to tuners A&B.
Set your tuners to match the changed setup.
A = simple, single, 28.2
B = Simple, single, 28.2
I = Motorised
J = internal loop through to I
deltec (15-03-23)
Why do I have to move them is there a reason for this could explain please regards deltec thank u very much again
I and J Tuners are in the middle not the end tuner I’ve no tuner in the middle
I am trying to help you get the most of your equipment.
FBC tuner units/modules have 8 demodulators/tuners. Two have connectors/sockets for signal wires, 6 do not. When used with universal lnbs or left in fbc automatic, the demodulators/tuners without the connectors/sockets work as internal loop through. If you loop through to the motorised LNB, you are looping to one LNB port only. If you move the two 28.2 wires to the FBC tuner module, the six socket-less tuners can internal loop to 2 lnb ports instead of one. As you are in England, I am presuming that most of your viewing is on 28.2.
Based on your picture, that you uploaded:
You have an FBC tuner in tuner slot A at far right of picture. Those are tuners A-H.
Your picture shows an empty tuner slot B.
You have a twin legacy tuner module in tuner slot C on far left. Those are tuners I&J.
deltec.jpg
Last edited by abu baniaz; 15-03-23 at 18:23. Reason: Add picture/rephrase
deltec (15-03-23)
6C11E1A3-0A63-4C51-B6B7-FBC4B3E18F14.jpg is this right all I need now is to conect the wire to lnb then the vu ultimo oil get the local satllite fiter to do it what would do with the middle tuner conect to a fixed dish that I can’t get with the motorised dish thanks again
Last edited by deltec; 15-03-23 at 18:30.
Thank you, that is brilliant. Can you now please configure your tuners to match the wiring.
A = simple, single, 28.2
B = Simple, single, 28.2
I = Motorised
J = internal loop through to I
Once you have done that, do not change the configuration unless you move wires.
deltec (15-03-23)
If done all that all I need a a fbc tuner do u no we’re I could buy one from it do u no any one who is selling one
You have 7 unused tuners on your receiver. Why do you think you need another FBC tuner? Which channels are you trying to record. Please also say that satellite name.
Posting Permissions
Reply With Quote