Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 9 of 9 FirstFirst ... 789
Results 121 to 132 of 132

Thread: Channels problem

  1. #121
    Joe_90's Avatar
    Title
    Moderator
    Join Date
    Mar 2014
    Location
    Wicklow, Ireland
    Posts
    4,188
    Thanks
    1,300
    Thanked 1,136 Times in 897 Posts
    Only seeing this as I'm going to bed. You shouldn't be pressing Providers - you should be pressing Favourites after running ABM. Just run ABM and it will generate bouquets (lists of channels). If you have ABM configured properly (lets say with Sky UK and Saorview), then when you press BLUE (Favourites), you will get a meny list for Sky and one for Saorview and when you select those you will get an ordered list of channels.


    EDIT - @abu - can you assist here, please? I think @Agricola is just selecting the wrong view and I have to "hit the hay" right now so I can't stay
    Last edited by Joe_90; 01-07-23 at 00:33.
    GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony TA-AN1000, Sony UBP-X800M2 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers

  2. #122

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2010
    Posts
    3,034
    Thanks
    1,356
    Thanked 431 Times in 395 Posts
    Could i ask if the Terrestrial tuner was scanned for your area and were all those channels working ? Yes ?

    Setting up ABM was it set for your area.

    Wonder what signal quality you are getting as i had an issue with ABM due to signal issue.

  3. #123

    Title
    Member
    Join Date
    Dec 2022
    Posts
    63
    Thanks
    2
    Thanked 2 Times in 2 Posts
    When I press favourites I get the following

    1_0_1_27DA_806_2_11A0000_0_0_0_20230701123958.jpg

    When I go into the Saorview folder I get

    1_0_16_451_3E9_2174_EEEE0000_0_0_0_20230701124547.jpg

    When I press on RTE1 I get the following

    1_0_19_835_3EA_2174_EEEE0000_0_0_0_20230701124123.jpg

    Yes the terrestrial tuner was scanned to my area (Spur Hil) and they were all working so I am wondering if it is a signal issue?

  4. #124
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,519
    Thanks
    6,510
    Thanked 9,219 Times in 6,284 Posts
    Which image are you on? Please do not just say "latest".
    Menu > Information > About will show you the details.

    With regards to selecting channels, please see this thread:
    https://www.world-of-satellite.com/s...nel-navigation

    You have scanned in the wrong transponders and added channels that you cannot receive.
    Let us do the following:

    1. Remove Terrestrial Services

    Press Up (next to OK button near middle of remote)
    Then Green (Orbital/satellite)
    Highlight Terrestrial Services
    Press Menu
    Select "Remove Terrestrial Services"
    Confirm the removal
    Then restart the receiver using the remote

    2. Do not use the scanning in Enigma2 for now. Especially not Automatic mode.

    3. In AutoBouquetsMaker ensure that you select your region/area/mast.
    Use ABM to "scan".

    After ABM scans, refresh/reload your bouquets. Simplest way to explain this is: Restart your receiver using the remote

    4. Check all the channels in the "Saorview - All Channels" bouquet/favourites group. Please do not use the provider group/category just yet.
    Repot back if they are all working of if you have an issue.

  5. #125

    Title
    Member
    Join Date
    Dec 2022
    Posts
    63
    Thanks
    2
    Thanked 2 Times in 2 Posts
    Hi, this is the image I am on

    1_0_16_83F_3EA_2174_EEEE0000_0_0_0_20230701132533.jpg

    I will now follow your instructions and report back

  6. #126
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,519
    Thanks
    6,510
    Thanked 9,219 Times in 6,284 Posts
    If you do not get all channels at stage 4, which multiplex does not work for you? Once you open the bouquet, before you press OK select the channel, the view will list the frequency. It is either C45 (666MHz) or C39 (618MHz).

    Another way to check is:
    Menu > Setup > Tuners & Scanning > Signal finder

    Use the up/down/left/right buttons to change options

    Select the tuner you want to test
    Satellite: Should be on Terrestrial if you selected the Terrestrial tuner
    Tune: Select predefined transponder
    Transponder: Press left/right to change to 666 MHz or 618 MHz and
    The signal levels should show and you should have a lock

  7. #127

    Title
    Member
    Join Date
    Dec 2022
    Posts
    63
    Thanks
    2
    Thanked 2 Times in 2 Posts
    Steps 1 and 2 carried out and now have no terrestrial channels.

    For step 3 I went in to ABM>Providers and the following are the settings
    1_0_19_287B_800_2_11A0000_0_0_0_20230701133914.jpg

    I then went into this
    1_0_19_287B_800_2_11A0000_0_0_0_20230701134023.jpg

    and ended up getting this
    1_0_19_287B_800_2_11A0000_0_0_0_20230701134205.jpg

    I then go and reboot the box (as opposed to selecting restart GUI - just in case I am doing that wrong?) but still end up with no Saorview channels getting the following
    screenshot_20230701134532.jpg

    and
    20230701134551.jpg
    Attached Images Attached Images

  8. #128

    Title
    Member
    Join Date
    Dec 2022
    Posts
    63
    Thanks
    2
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by abu baniaz View Post
    If you do not get all channels at stage 4, which multiplex does not work for you? Once you open the bouquet, before you press OK select the channel, the view will list the frequency. It is either C45 (666MHz) or C39 (618MHz).

    Another way to check is:
    Menu > Setup > Tuners & Scanning > Signal finder

    Use the up/down/left/right buttons to change options

    Select the tuner you want to test
    Satellite: Should be on Terrestrial if you selected the Terrestrial tuner
    Tune: Select predefined transponder
    Transponder: Press left/right to change to 666 MHz or 618 MHz and
    The signal levels should show and you should have a lock
    Having done this I figure that it is Channel 39 which is not really working, as it seems to come and go as per below

    screenshot_20230701135536.jpg

    and sometimes I get

    screenshot_20230701135733.jpg
    Last edited by Agricola; 01-07-23 at 13:59.

  9. #129
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,519
    Thanks
    6,510
    Thanked 9,219 Times in 6,284 Posts
    OK, so you will now have to investigate why you are not getting signal. If it is coming and going, usually a splitter or loose connection.

    For now, Perform a manual scan. Ensure that you select only the working multiplex, 618MHz. You can do that in signal finder or manual scan. Once again, only one transponder/multiplex until you sort your signal issue.

  10. The Following User Says Thank You to abu baniaz For This Useful Post:

    Agricola (01-07-23)

  11. #130

    Title
    Member
    Join Date
    Dec 2022
    Posts
    63
    Thanks
    2
    Thanked 2 Times in 2 Posts
    Thanks abu baniaz and to Joe 90 and catkid for your input, I appreciate it. Back to checking aerials so and connections I guess!

  12. #131
    Joe_90's Avatar
    Title
    Moderator
    Join Date
    Mar 2014
    Location
    Wicklow, Ireland
    Posts
    4,188
    Thanks
    1,300
    Thanked 1,136 Times in 897 Posts
    Apologies for my intermittent support on this (family issues at present).

    I've checked the Saorview website for service interruptions and to verify the transmitter frequencies. Definitely C39 and C45. The fact that you are getting the lower channel 39 and no signal on 45 might indicate a cabling issue or possibly water in the cable. Also could be an unsuitable aerial, but unlikely unless you are on the fringes of reception of Spur Hill. Can you confirm that the Saorview website is telling you that Spur Hill is your ideal transmitter? The website has an address checker and it will give the bearing and distance of the transmitter from your address. What is this bearing and distance? Are you sure your aerial is horizontal (the elements are flat and not pointing up and down)?

    Other things I noticed in your setup. The channel numbers are not the actual numbers used by Saorview, so I suspect that you are not using "Alternative Numbering Mode". I use this as it simplifies things for me and other users in the house. Saorview starts with channel number 1 (RTE1), then channel 2(RTE2) and so on. The satellite channels for Sky start from 101.

    Here is a screenshot of Alternative Numbering mode
    channel_numbering_mode.jpg


    Here is the Saorview list with the channels starting at 1

    Saorview_bouquet.jpg


    Here is the Sky list with the channels starting at 101 - ignore the fact that the Saorview channel 30 and the PoP cartoon channels are on 50 and 58 - these are a consequence of my combined bouquet settings.

    Sky_uk_bouquet.jpg

    I would also simplify the Sky ABM settings if I were you. You have all the sections bouquets enabled. I have only the main bouquet enabled which means it doesn't generate a separate listing for each section.

    sky_uk_abm.jpg

    Finally - this is my list when I press the BLUE (Favourites) button in the channels list (press UP arrow or DOWN arrow first). Note that I have just one entry each for Saorview, Sky and Freesat. Again, ignore the multitude of IPTV lists - they are just testing placeholders for me.

    blue_button_bouquets.jpg

    Hope this helps in the configuration. You do seem to have some sort of signal/cabling issue, though.
    GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony TA-AN1000, Sony UBP-X800M2 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers

  13. #132

    Title
    Member
    Join Date
    Dec 2022
    Posts
    63
    Thanks
    2
    Thanked 2 Times in 2 Posts
    No problem Joe 90, and I appreciate your and the other people's time and effort in helping me. Yes Spur Hill is the transmitter as per Saorview website and bearing and distance is as below and yes aerial elements are flat

    Screenshot (943).jpg

    From what you are saying I too think that it's a cabling or aerial issue. The aerials have been there for years, but if I eliminate cabling issues I presume something like the one below for €25.95 will do the job?

    Screenshot (944).jpg

    Thanks for the screenshots re tidying up my setup.

Page 9 of 9 FirstFirst ... 789

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.