Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 3 of 4 FirstFirst 1234 LastLast
Results 31 to 45 of 48

Thread: Open ViX Downloads Before v6.2 - Any Links?

  1. #31
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    7,630
    Thanks
    923
    Thanked 2,639 Times in 2,022 Posts
    have to say not the most obvious field delimiter - if it makes it easier - and you can be sure of another single character not being used for anything else - then use that and at the end do a replace with :::
    In the meantime, will try your uodate at start etc and see what happens, although I know that I have tried that in the past.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  2. The Following User Says Thank You to twol For This Useful Post:

    nekrub2 (23-09-22)

  3. #32
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    12,248
    Thanks
    1,938
    Thanked 4,324 Times in 2,859 Posts
    Quote Originally Posted by nekrub2 View Post
    The Information says
    Detected devices: SanDisk (Cruzer Blade) External (USB) 31.39 GB - Free 24.41 GB

    So I suggest that something else must have provoked the crash.
    Both those crash logs say "Read-only file system".

  4. #33
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    7,630
    Thanks
    923
    Thanked 2,639 Times in 2,022 Posts
    ... and 21:40:03.3407 {BackupManager] Backup failed - e. g. wrong backup destination or no space left on backup device

    So also might be worth checking both space and that HDD is the device you are expecting it to be!
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  5. #34
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    7,630
    Thanks
    923
    Thanked 2,639 Times in 2,022 Posts
    Quote Originally Posted by nekrub2 View Post
    Hit Twol
    I created a crash on which I only came out by re-flashing the image.
    This is what I did:
    I wanted to import some more song and did not find a video button on my remote. So I thought I would enable "update database at Start" and disable Hide Plugin during update. After the crash I made a reboot and tried to enter again the the MP3Browser to set it back, but it crashed just when entering.

    I attach you the crash logs.

    nekrub2

    PS. Never change a winning horse ;-)
    video button or "pvr" is the movie "playlist" button on remote
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  6. #35
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    12,248
    Thanks
    1,938
    Thanked 4,324 Times in 2,859 Posts
    Quote Originally Posted by twol View Post
    ... and 21:40:03.3407 {BackupManager] Backup failed - e. g. wrong backup destination or no space left on backup device

    So also might be worth checking both space and that HDD is the device you are expecting it to be!
    Yes but shouldn't crash. Crash is this:
    Code:
    21:40:03.3407 {BackupManager] Backup failed - e. g. wrong backup destination or no space left on backup device
    21:40:13.3968 [MessageBox] Timeout!
    21:40:13.4205 Traceback (most recent call last):
    21:40:13.4211   File "/usr/lib/enigma2/python/StartEnigma.py", line 224, in processDelay
    21:40:13.4299     callback(*retval)
    21:40:13.4311 TypeError: BackupFiles.BackupComplete() takes 1 positional argument but 2 were given
    Hopefully fixed with this:
    https://github.com/OpenViX/vix-core/...e06b31c7564d3f

  7. The Following User Says Thank You to Huevos For This Useful Post:

    nekrub2 (23-09-22)

  8. #36

    Title
    Senior Member
    Join Date
    Dec 2015
    Location
    Switzerland
    Posts
    261
    Thanks
    49
    Thanked 40 Times in 32 Posts
    Hi Huevos

    On your link I see src/BackupManager.py

    Where would I have to copy this file in and would I need a reboot afterwards?
    VU+ Solo2
    USB 32GB used as HDD
    Diseq 13.0E 19.0E

  9. #37

    Title
    ViX Beta Tester
    Join Date
    Nov 2020
    Posts
    207
    Thanks
    64
    Thanked 21 Times in 19 Posts
    \Root\usr\lib\enigma2\python\Plugins\SystemPlugins \ViX\

  10. #38
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    12,248
    Thanks
    1,938
    Thanked 4,324 Times in 2,859 Posts
    Quote Originally Posted by nekrub2 View Post
    Hi Huevos

    On your link I see src/BackupManager.py

    Where would I have to copy this file in and would I need a reboot afterwards?
    Just wait until the next build. But anyway why is /media/hdd read only. Have you touched a write protect slider on the card?

  11. #39

    Title
    Senior Member
    Join Date
    Dec 2015
    Location
    Switzerland
    Posts
    261
    Thanks
    49
    Thanked 40 Times in 32 Posts
    The USB is not write protect. I just made a new backup through the Backup Manager. It says under device: /media/hdd/
    So it can't be completely write protect. I only can assume that some files for the cover pictures or the lyrics were by any reason write protected. The best is to remove the USB from my sat box, put it into my laptop and explore it under Linux Mint 21.
    VU+ Solo2
    USB 32GB used as HDD
    Diseq 13.0E 19.0E

  12. #40
    Willo3092's Avatar
    Title
    ViX Beta Tester
    Join Date
    Oct 2016
    Location
    East Midlands
    Posts
    857
    Thanks
    670
    Thanked 338 Times in 253 Posts
    I noticed that some recordings had failed last night due to /media/hdd not being writeable. Mount Manager showed that the drive was marked as read only.
    I did a full reboot and the drive won't mount at all now. I haven't had chance to investigate further yet. OpenViX 6.2.010 (2022-09-05) dev build on a GigaBlue UHD UE 4K.
    My logs are set to save to hdd but I noticed there is a crash log in /home/root/.

    Enigma2_crash_2022-09-21_06-51-43.log

    I think it is probably generated because I have no hdd rather than showing why it was set to R/O
    Willo
    #######################
    GigaBlue UHD UE 4K
    Octagon SF8008 4K UHD
    Zgemma H9 Twin
    Xtrend ET8500
    AX HD61 4K UHD Twin (test box)
    Vu+ Uno4K
    GT-Sat GT-S3DCSS24 Unicable II LNB
    GT-Sat GT-dLNB1-DY Unicable II LNB
    #######################

  13. #41
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    12,248
    Thanks
    1,938
    Thanked 4,324 Times in 2,859 Posts
    Quote Originally Posted by Willo3092 View Post
    I noticed that some recordings had failed last night due to /media/hdd not being writeable. Mount Manager showed that the drive was marked as read only.
    I did a full reboot and the drive won't mount at all now. I haven't had chance to investigate further yet. OpenViX 6.2.010 (2022-09-05) dev build on a GigaBlue UHD UE 4K.
    My logs are set to save to hdd but I noticed there is a crash log in /home/root/.

    Enigma2_crash_2022-09-21_06-51-43.log

    I think it is probably generated because I have no hdd rather than showing why it was set to R/O
    That crash log is not related. Something went wrong in ABM run. You would need to retest with the latest version of dvbreader.py so the line number in the crash correspond with the current version.

    No idea why your HDD is not writeable.

  14. #42
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    7,630
    Thanks
    923
    Thanked 2,639 Times in 2,022 Posts
    Quote Originally Posted by Willo3092 View Post
    I noticed that some recordings had failed last night due to /media/hdd not being writeable. Mount Manager showed that the drive was marked as read only.
    I did a full reboot and the drive won't mount at all now. I haven't had chance to investigate further yet. OpenViX 6.2.010 (2022-09-05) dev build on a GigaBlue UHD UE 4K.
    My logs are set to save to hdd but I noticed there is a crash log in /home/root/.

    Enigma2_crash_2022-09-21_06-51-43.log

    I think it is probably generated because I have no hdd rather than showing why it was set to R/O
    Dmsg shows error:
    3.419268] scsi 2:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
    <5>[ 3.428685] sd 2:0:0:0: Attached scsi generic sg0 type 0
    <5>[ 3.434637] sd 2:0:0:0: [sda] 240353280 512-byte logical blocks: (123 GB/115 GiB)
    <5>[ 3.447080] sd 2:0:0:0: [sda] Write Protect is on
    <7>[ 3.451834] sd 2:0:0:0: [sda] Mode Sense: 43 00 80 00
    <5>[ 3.459208] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    <6>[ 3.498232] sda: sda1
    <5>[ 3.502689] sd 2:0:0:0: [sda] Attached SCSI removable disk
    <5>[ 3.556820] random: nonblocking pool is initialized
    <6>[ 3.871703] EXT4-fs (mmcblk0p5): re-mounted. Opts: nodelalloc,data=journal
    <6>[ 4.167945] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
    <3>[ 4.174878] EXT4-fs (sda1): write access unavailable, cannot proceed
    <3>[ 4.194909] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (2c0)
    <3>[ 4.206148] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (2c4)
    <4>[ 4.221346] UDF-fs: warning (device sda1): udf_fill_super: No partition found (2)
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  15. #43
    Willo3092's Avatar
    Title
    ViX Beta Tester
    Join Date
    Oct 2016
    Location
    East Midlands
    Posts
    857
    Thanks
    670
    Thanked 338 Times in 253 Posts
    I'll try another hdd later on. I added my post to this thread because nekrub2's hdd had suddenly become R/O as well. Just wondered if it was related.
    Willo
    #######################
    GigaBlue UHD UE 4K
    Octagon SF8008 4K UHD
    Zgemma H9 Twin
    Xtrend ET8500
    AX HD61 4K UHD Twin (test box)
    Vu+ Uno4K
    GT-Sat GT-S3DCSS24 Unicable II LNB
    GT-Sat GT-dLNB1-DY Unicable II LNB
    #######################

  16. #44

    Title
    Senior Member
    Join Date
    Dec 2015
    Location
    Switzerland
    Posts
    261
    Thanks
    49
    Thanked 40 Times in 32 Posts

    MP3Browser crash read only?

    I removed the USB HDD and plugged it into my laptop on the windows 7 partition. Indeed the directory mp3browser and its underlying sub-directories cache and db had the read only attribute. so I set them to read and write and attached the stick back to the box. When trying to update the MP3Browser database the box crashed again. This time I could read one error, saying
    FAT-fs (sda1): error, fat_free_clusters: deleting FAT entry beyond EOF.
    FAT-fs (sda1): Filesystem has been set read-only.

    Could it be that I have a buggy stick and as soon as openvix detects this it sets it read-only?

    I attach the crash log.
    Attached Files Attached Files
    VU+ Solo2
    USB 32GB used as HDD
    Diseq 13.0E 19.0E

  17. #45

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2014
    Posts
    1,302
    Thanks
    601
    Thanked 414 Times in 266 Posts
    Quote Originally Posted by nekrub2 View Post
    FAT-fs (sda1): error, fat_free_clusters: deleting FAT entry beyond EOF.
    FAT-fs (sda1): Filesystem has been set read-only.

    Could it be that I have a buggy stick and as soon as openvix detects this it sets it read-only?

    I attach the crash log.
    If this is a FAT/FAT32 formatted USB then I would plug this into a Windows device and do a full chkdisk (not quick).

    It's talking about deleting File Allocation Table entry beyond the End of File so this doesn't sound promising

  18. The Following User Says Thank You to bbbuk For This Useful Post:

    nekrub2 (23-09-22)

Page 3 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.