Problem with H9SDcard manager.

[afterburn]

I posted this on the other thread but maybe i was better starting a new thread so here goes
I have tried the method in the tutorial on here twice with 2 different micro sd cards.
Inserted card - initialize device - I choose APPSD-External (MMC) (7.88 GB)
At this stage I highlight that card and press ok.
I get Model :APPSD
Capcity 7.88GB
Bus : External (MMC)
Not press green button as per tutorial.
Anyway when I select it and press ok
Do you really want to initilaize this Device?
I choose Yes
It goes throught the procedure and mounts.
I restart and Go To vix there is no H9SD CardManager option.
Any ideas what might be wrong?

Vix image 6.0.008

Any help appreciated.

[twol]

I posted this on the other thread but maybe i was better starting a new thread so here goes
I have tried the method in the tutorial on here twice with 2 different micro sd cards.
Inserted card - initialize device - I choose APPSD-External (MMC) (7.88 GB)
At this stage I highlight that card and press ok.
I get Model :APPSD
Capcity 7.88GB
Bus : External (MMC)
Not press green button as per tutorial.
Anyway when I select it and press ok
Do you really want to initilaize this Device?
I choose Yes
It goes throught the procedure and mounts.
I restart and Go To vix there is no H9SD CardManager option.
Any ideas what might be wrong?

Vix image 6.0.008

Any help appreciated.

Think you are looking at wrong menu.
You need the h9sdcard manager ———> blue button, ViX , h9sdcard manager and then use it to initialise teh card and copy root to sd card

[afterburn]

Think you are looking at wrong menu.
You need the h9sdcard manager ———> blue button, ViX , h9sdcard manager and then use it to initialise teh card and copy root to sd card

Blue button brings up option of Vix image management not Just "Vix"

vix.jpg
vix1.jpg

something strange?

[twol]

In 2nd picture you should have at bottom h9 sd manager
Are you sure its a h9 and not h9 se which is a very different box

[afterburn]

In 2nd picture you should have at bottom h9 sd manager
Are you sure its a h9 and not h9 se which is a very different box

You might be onto something here.
Its a H9.2H se
It says on this page
https://www.world-of-satellite.co.uk...gemma-h9-2h-se

*Plugins available via image plugin feeds, Flash expander plugin must be
used if both Kodi & QT Stalker plugins are installed, see guide in tab above.

I cant see this guide in tab above bit.
What am i missing.
Thanks.

[twol]

So its an SE model with multiboot, so you should have no issues with Kodi etc.
So just use the box as is.

[afterburn]

So its an SE model with multiboot, so you should have no issues with Kodi etc.
So just use the box as is.

Ah right that's grand thanks

[afterburn]

It's the stalker I was trying to get working.
When I install it and enter the URL.
I start stalker and it just goes straight back to the satellite feed.

[twol]

It's the stalker I was trying to get working.
When I install it and enter the URL.
I start stalker and it just goes straight back to the satellite feed.

Is that stalker from the feeds? Zgemma,s version ( the original) is perhaps not as flexible … are you sure that you have the correct MAC address set for the supplier? Stalker needs both url and Mac addresses

[afterburn]

yes the stalker thats in the openvix plugin downloads. stalkerQt
everything is entered correctly.
The problem seems to be with the plugin itself.

[afterburn]

https://youtube.com/shorts/WpCCJtqViAs