Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 9 of 9

Thread: unicable.xml, Inverto Unicable II IDLU-32UL42-UNBOO-OPP Item: 5679

  1. #1

    Title
    Junior Member
    Join Date
    May 2015
    Posts
    12
    Thanks
    3
    Thanked 0 Times in 0 Posts

    Question unicable.xml, Inverto Unicable II IDLU-32UL42-UNBOO-OPP Item: 5679

    I want to add an LNB to the unicable.xml file located in /usr/share/enigma2/.

    The LNB I want to add is Inverto Unicable II IDLU-32UL42-UNBOO-OPP Item: 5679 and it's specifications are available here:
    https://www.inverto.tv/lnb/373/progr...lnb-with-32-ub

    The image I am currently using is Openvix 6.2.001 on a Vu+ Uno4k SE.

    Looking at the existing LNBs listed in unicable.xml, I can see the following code for other Inverto LNBs:
    Code:
    <manufacturer name="Inverto">
    <product name="IDLP-40UNIQD+S" scrs="1680,1420,2040,1210"/>
    <product name="IDLB-QUDL43-UNE1L-OPP" scrs="1210,1420,1680,2040"/>
    <product name="IDLB-QUDL-UNI2L-OPP" scrs="1210,1420,1680,2040"/>
    <product name="IDLB-QUDL42-UNI2L-1PP" scrs="1210,1420,1680,2040"/>
    <product name="IDLU-24UL40-UNMOO-OPP" positions="4" bootuptime="800" format="jess" scrs="1210,1420,1680,2040,1005,1050,1095,1140,1260,1305,1350,1475,1520,1565,1610,1725,1770,1815,1860,1905,1950,1995,2085,2130"/>
    <product name="IDLU-24UL40-PLSTM-BPP" bootuptime="2500" format="jess" scrs="1210,1420,1680,2040,0984,1020,1056,1092,1128,1164,1256,1292,1328,1364,1458,1494,1530,1566,1602,1638,1716,1752,1788,1824"/>
    <!--  Item 5404  -->
    <product name="IDLU-32UL40-UNBOO-OPP" positions="4" bootuptime="800" format="jess" scrs="1210,1420,1680,2040,984,1020,1056,1092,1128,1164,1256,1292,1328,1364,1458,1494,1530,1566,1602,1638,1716,1752,1788,1824,1860,1896,1932,1968,2004,2076,2112,2148"/>
    </manufacturer>
    I wanted to add the following line:
    Code:
    <manufacturer name="Inverto">
    <product name="IDLP-40UNIQD+S" scrs="1680,1420,2040,1210"/>
    <product name="IDLB-QUDL43-UNE1L-OPP" scrs="1210,1420,1680,2040"/>
    <product name="IDLB-QUDL-UNI2L-OPP" scrs="1210,1420,1680,2040"/>
    <product name="IDLB-QUDL42-UNI2L-1PP" scrs="1210,1420,1680,2040"/>
    <product name="IDLU-24UL40-UNMOO-OPP" positions="4" bootuptime="800" format="jess" scrs="1210,1420,1680,2040,1005,1050,1095,1140,1260,1305,1350,1475,1520,1565,1610,1725,1770,1815,1860,1905,1950,1995,2085,2130"/>
    <product name="IDLU-24UL40-PLSTM-BPP" bootuptime="2500" format="jess" scrs="1210,1420,1680,2040,0984,1020,1056,1092,1128,1164,1256,1292,1328,1364,1458,1494,1530,1566,1602,1638,1716,1752,1788,1824"/>
    <!--  Item 5404  -->
    <product name="IDLU-32UL40-UNBOO-OPP" positions="4" bootuptime="800" format="jess" scrs="1210,1420,1680,2040,984,1020,1056,1092,1128,1164,1256,1292,1328,1364,1458,1494,1530,1566,1602,1638,1716,1752,1788,1824,1860,1896,1932,1968,2004,2076,2112,2148"/>
    <!--  Item 5679  -->
    <product name="IDLU-32UL42-UNBOO-OPP" positions="4" bootuptime="800" format="jess" scrs="1210,1420,1680,2040,984,1020,1056,1092,1128,1164,1256,1292,1328,1364,1458,1494,1530,1566,1602,1638,1716,1752,1788,1824,1860,1896,1932,1968,2004,2076,2112,2148"/>
    </manufacturer>
    The questions I have are:
    1. How do I know the bootuptime? Is it 2500? 800?
    2. Should I write the tag: positions="4", what does this mean? What is the correct value?
    3. in the unicable.xml file, there are two sections with the manufacturer Inverto, Couldn't it be merge into one single section?

    Code:
    <manufacturer name="Inverto">
    (...)
    </manufacturer>
    Last edited by jorgeavlobo; 13-05-22 at 11:44.

  2. #2
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    11,743
    Thanks
    1,886
    Thanked 4,144 Times in 2,748 Posts
    For boot up time you will need to test. My Inverto works at 800. But you can only test that if the LNB is not powered 24/7. If the delay is too short a tune failed message will appear on reboot.

  3. #3
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    22,516
    Thanks
    6,070
    Thanked 8,808 Times in 5,951 Posts
    The xml file contains details for switches as well as LNBs, this is why there are two sections.

  4. #4

    Title
    Junior Member
    Join Date
    May 2015
    Posts
    12
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Any updates regarding question number 2 regarding the “positions=“4””?

  5. #5
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    22,516
    Thanks
    6,070
    Thanked 8,808 Times in 5,951 Posts
    Best to contact Inverto, they will confirm number of positions. That being said, as you are not programming it, it does not matter, just make sure you select position 1 when configuring it.

    You don't really need to add the device, you can use use the existing 32UL40, the channels/frequencies are the same.

    Nice to see inverto have narrow unicable LNBs.

  6. #6
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    22,516
    Thanks
    6,070
    Thanked 8,808 Times in 5,951 Posts
    I'll email inverto for you and add details to the xml file we use for image. Just to repeat what I said earlier, use the 32ul40 entry for now

  7. #7
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    11,743
    Thanks
    1,886
    Thanked 4,144 Times in 2,748 Posts
    Quote Originally Posted by jorgeavlobo View Post
    Any updates regarding question number 2 regarding the “positions=“4””?
    Yes, it is going to be positions="4" but anyway this has no relevance unless you set up the lnb with a programmer. Default setup of that lnb out of the box is to respond to all commands irrespective of the positions command.

  8. #8

    Title
    Junior Member
    Join Date
    May 2015
    Posts
    12
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Thank you very much, I really appreciate that you add that LNB for future images.

  9. #9
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    22,516
    Thanks
    6,070
    Thanked 8,808 Times in 5,951 Posts
    Has been added here:
    https://github.com/OpenViX/enigma2/c...d6b7c649b6f8ad
    Will be in the next Release image built after this.

    Pull request also submitted to PLI

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.