Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 26

Thread: Reboot in new openvix 6.0

  1. #1

    Title
    Member
    Join Date
    Oct 2016
    Posts
    63
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Reboot in new openvix 6.0

    I have changed ton new openvix 6.0, but since them, when i try to see something recorded on my HDD the image said "your receiver encountered a software problem and needs to be restartered". This is done not on every recorded program but most of then. In the other hand if i try to record from the rec button the machine is blocked and again restarted itself. That does not occur on the old openvix 5. Any help?

  2. #2
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    7,422
    Thanks
    896
    Thanked 2,581 Times in 1,979 Posts
    Quote Originally Posted by miguel57 View Post
    I have changed ton new openvix 6.0, but since them, when i try to see something recorded on my HDD the image said "your receiver encountered a software problem and needs to be restartered". This is done not on every recorded program but most of then. In the other hand if i try to record from the rec button the machine is blocked and again restarted itself. That does not occur on the old openvix 5. Any help?
    1. turn on debug logs and post debug and any crash logs
    2. what format is the HDD, only 'ext4', 'ext3', 'ext2', 'nfs', 'cifs', 'ntfs' are now supported
    3. check that you have drivers installed e.g. ntfs
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  3. #3

    Title
    Member
    Join Date
    Oct 2016
    Posts
    63
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by twol View Post
    1. turn on debug logs and post debug and any crash logs
    2. what format is the HDD, only 'ext4', 'ext3', 'ext2', 'nfs', 'cifs', 'ntfs' are now supported
    3. check that you have drivers installed e.g. ntfs
    How can i Know what format do i have on my hdd?

  4. #4
    bellejt's Avatar
    Title
    Senior Member
    Join Date
    Dec 2013
    Posts
    1,565
    Thanks
    49
    Thanked 287 Times in 246 Posts
    settings - vix - mount manager
    VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
    Triax 88 cm rotor single LNB 30 E- 40 W
    1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E

  5. #5

    Title
    Member
    Join Date
    Oct 2016
    Posts
    63
    Thanks
    0
    Thanked 0 Times in 0 Posts
    i have ext4 r/w

  6. #6
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    7,422
    Thanks
    896
    Thanked 2,581 Times in 1,979 Posts
    So need logs posted
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  7. #7

    Title
    Member
    Join Date
    Oct 2016
    Posts
    63
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by twol View Post
    So need logs posted
    crash 2022- 05-06- 19-13-02. Is that what you need?
    Last edited by miguel57; 06-05-22 at 18:28.

  8. #8

    Title
    Member
    Join Date
    Oct 2016
    Posts
    63
    Thanks
    0
    Thanked 0 Times in 0 Posts
    OpenViX Enigma2 Crashlog

    Crashdate = vie may 6 19:13:02 2022

    Creator = OpenViX
    Version = 6.0
    Build = 001
    Dev = 001
    Type = release
    Machine = vuduo2
    URL = http://www.world-of-satellite.com
    distro=openvix
    compile-date=20211024
    compile-datetime=20211024174826
    Compiled = Nov 3 2021
    Skin = PLi-HD-Night/skin.xml
    Component = Enigma2

    Kernel CMDline = libata.force=1:1.5Gbps bmem=192M@64M bmem=384M@512M memc1=788M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync
    Nim Sockets = NIM Socket 0:
    Type: DVB-S2
    Name: Vuplus DVB-S NIM(AVL6222)
    Frontend_Device: 0
    I2C_Device: 2
    NIM Socket 1:
    Type: DVB-S2
    Name: Vuplus DVB-S NIM(AVL6222)
    Frontend_Device: 1
    I2C_Device: 2
    NIM Socket 2:
    Type: DVB-C
    Name: Vuplus DVB-T/C USB NIM(TURBO)
    Frontend_Device: 2


    758.9821> 19:12:49.2307 [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
    < 8758.9842> 19:12:49.2327 [eDVBServicePlay] have 1 video stream(s) (00ab), and 2 audio stream(s) (0092, 0093), and the pcr pid is 00ab, and the text pid is 0041
    < 8758.9849> 19:12:49.2335 [eTSMPEGDecoder] decoder state: play, vpid=00ab, apid=0092
    < 8758.9851> 19:12:49.2337 [eDVBAudio0] AUDIO_STOP ok
    < 8759.0141> 19:12:49.2627 [eDVBAudio0] DEMUX_STOP ok
    < 8759.0143> 19:12:49.2628 [eDVBAudio0] AUDIO_CONTINUE ok
    < 8759.0232> 19:12:49.2718 [eDVBAudio0] destroy
    < 8759.0271> 19:12:49.2756 [eDVBAudio0] DMX_SET_PES_FILTER pid=0x0092 ok
    < 8759.0272> 19:12:49.2757 [eDVBAudio0] DEMUX_START ok
    < 8759.0278> 19:12:49.2764 [eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok
    < 8759.0357> 19:12:49.2842 [eDVBAudio0] AUDIO_PAUSE ok
    < 8759.0399> 19:12:49.2884 [eDVBAudio0] AUDIO_PLAY ok
    < 8759.0467> 19:12:49.2952 [eDVBAudio0] AUDIO_CONTINUE ok
    < 8759.0877> 19:12:49.3362 [AutoRes] service changed
    < 8759.1053> 19:12:49.3539 [eDVBDemux] open demux /dev/dvb/adapter0/demux8
    < 8759.1055> 19:12:49.3541 [eDVBSectionReader] DMX_SET_FILTER pid=1043
    < 8759.4894> 19:12:49.7380 [eDVBFrontend0] close frontend
    < 8759.5050> 19:12:49.7536 [eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
    < 8760.0886> 19:12:50.3372 [AutoRes] determineContent
    < 8760.0904> 19:12:50.3390 [AutoRes] switch deinterlacer mode to auto
    < 8760.0909> 19:12:50.3394 [AutoRes] new content is 1920x1080i25
    < 8760.0912> 19:12:50.3398 [AutoRes] determined videomode 1080p50
    < 8763.6831> 19:12:53.9317 [eHdmiCEC] received message 87 00 E0 91
    < 8763.6837> 19:12:53.9323 [hdmiCEC][messageReceived0]: msgaddress=0 CECcmd=<Reporting Device Vendor ID>, cmd = 135, ctrl0=0, length=4
    < 8763.6839> 19:12:53.9324
    < 8763.8304> 19:12:54.0789 [eHdmiCEC] received message 87 00 E0 91
    < 8763.8312> 19:12:54.0798 [hdmiCEC][messageReceived0]: msgaddress=0 CECcmd=<Reporting Device Vendor ID>, cmd = 135, ctrl0=0, length=4
    < 8763.8314> 19:12:54.0800
    < 8763.9739> 19:12:54.2226 [eHdmiCEC] received message 87 00 E0 91
    < 8763.9746> 19:12:54.2231 [hdmiCEC][messageReceived0]: msgaddress=0 CECcmd=<Reporting Device Vendor ID>, cmd = 135, ctrl0=0, length=4
    < 8763.9747> 19:12:54.2233
    < 8764.1311> 19:12:54.3797 [eHdmiCEC] received message 87 00 E0 91
    < 8764.1319> 19:12:54.3804 [hdmiCEC][messageReceived0]: msgaddress=0 CECcmd=<Reporting Device Vendor ID>, cmd = 135, ctrl0=0, length=4
    < 8764.1321> 19:12:54.3807
    < 8764.2056> 19:12:54.4542 [eHdmiCEC] received message
    < 8764.2063> 19:12:54.4549 [hdmiCEC][messageReceived0]: msgaddress=0 CECcmd=<Reporting Device Vendor ID>, cmd = 135, ctrl0=0, length=0
    < 8764.2065> 19:12:54.4550
    < 8768.8585> 19:12:59.1071 [eInputDeviceInit] 1 6c (108) 1
    < 8768.8587> 19:12:59.1072 [eRCDeviceInputDev] emit: 1
    < 8768.8628> 19:12:59.1114 [InfoBarGenerics] Key: 108 (Make) KeyID='KEY_DOWN' Binding='('DOWN',)'.
    < 8768.8637> 19:12:59.1123 [ActionMap] Keymap 'InfobarMovieListActions' -> Action = 'down'.
    < 8768.9151> 19:12:59.1637 [Skin] Processing screen 'MovieSelection', position=(0, 0), size=(1280 x 720) for module 'MovieSelection'.
    < 8769.0163> 19:12:59.2649 [Skin] Attribute 'itemHeights' (with value of '75,53,28') in object of type 'eListbox' is not implemented!
    < 8769.0167> 19:12:59.2653 [Skin] Attribute 'fontSizesOriginal' (with value of '21,20,18') in object of type 'eListbox' is not implemented!
    < 8769.0171> 19:12:59.2656 [Skin] Attribute 'fontSizesCompact' (with value of '21,18') in object of type 'eListbox' is not implemented!
    < 8769.0174> 19:12:59.2660 [Skin] Attribute 'fontSizesMinimal' (with value of '21,20') in object of type 'eListbox' is not implemented!
    < 8769.1823> 19:12:59.4309 [Screen] Warning: Skin is missing element 'TrashcanSize' in <class 'Screens.MovieSelection.MovieSelection'>.
    < 8769.2218> 19:12:59.4704 [Skin] Processing screen 'MovieSelectionSummary', position=(0, 0), size=(140 x 32) for module 'MovieSelectionSummary'.
    < 8769.4306> 19:12:59.6792 [eInputDeviceInit] 0 6c (108) 1
    < 8769.4307> 19:12:59.6793 [eRCDeviceInputDev] emit: 0
    < 8769.4348> 19:12:59.6834 [InfoBarGenerics] Key: 108 (Break) KeyID='KEY_DOWN' Binding='('DOWN',)'.
    < 8769.4569> 19:12:59.7055 [Trashcan] Debug path /media/hdd/movie/ => /media/hdd/movie/.Trash
    < 8769.4766> 19:12:59.7252 [Pixmap] setPixmapNum(7) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x70e34968> >, <enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x70e349b0> >, <enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x70e349f8> >, <enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x70e34a40> >, <enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x70e34a88> >, <enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x70e34ad0> >, <enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x70e34b18> >]
    < 8770.3446> 19:13:00.5932 [eInputDeviceInit] 1 6c (108) 1
    < 8770.3447> 19:13:00.5933 [eRCDeviceInputDev] emit: 1
    < 8770.3491> 19:13:00.5977 [InfoBarGenerics] Key: 108 (Make) KeyID='KEY_DOWN' Binding='('DOWN',)'.
    < 8770.3500> 19:13:00.5986 [ActionMap] Keymap 'DirectionActions' -> Action = 'down'.
    < 8770.6832> 19:13:00.9317 [eInputDeviceInit] 0 6c (108) 1
    < 8770.6833> 19:13:00.9318 [eRCDeviceInputDev] emit: 0
    < 8770.6880> 19:13:00.9366 [InfoBarGenerics] Key: 108 (Break) KeyID='KEY_DOWN' Binding='('DOWN',)'.
    < 8770.9370> 19:13:01.1856 [eInputDeviceInit] 1 160 (352) 1
    < 8770.9372> 19:13:01.1857 [eRCDeviceInputDev] emit: 1
    < 8770.9416> 19:13:01.1902 [InfoBarGenerics] Key: 352 (Make) KeyID='KEY_OK' Binding='('OK',)'.
    < 8770.9425> 19:13:01.1911 [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.
    < 8770.9808> 19:13:01.2293 1:0:19:7863:41A:1:C00000:0:0:0::LA 1 HD 1:0:19:7863:41A:1:C00000:0:0:0::LA 1 HD
    < 8770.9834> 19:13:01.2319 [Navigation] playing ref 1:0:0:0:0:0:0:0:0:0:/media/hdd/movie/20220506 1635 - LA 1 HD - DOWNTON ABBEY (T4).ts
    < 8770.9846> 19:13:01.2332 [eFilePushThread] stopping thread
    < 8770.9851> 19:13:01.2336 [eFilePushThread] STOP
    < 8771.0113> 19:13:01.2599 [eDVBServicePlay] unpause
    < 8771.0117> 19:13:01.2603 [Pixmap] setPixmapNum(0) failed! defined pixmaps: []
    < 8771.0146> 19:13:01.2632 [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
    < 8771.0147> 19:13:01.2633 [eDVBVideo0] DEMUX_STOP ok
    < 8771.0178> 19:13:01.2664 [eDVBVideo0] VIDEO_STOP ok
    < 8771.0207> 19:13:01.2693 [eDVBVideo0] destroy
    < 8771.0208> 19:13:01.2694 [eDVBAudio0] AUDIO_STOP ok
    < 8771.0471> 19:13:01.2957 [eDVBAudio0] DEMUX_STOP ok
    < 8771.0473> 19:13:01.2958 [eDVBAudio0] AUDIO_CONTINUE ok
    < 8771.0563> 19:13:01.3049 [eDVBAudio0] destroy
    < 8771.0564> 19:13:01.3050 [eDVBText0] DEMUX_STOP ok
    < 8771.0565> 19:13:01.3050 [decoder][eDVBText] stopCaching
    < 8771.0573> 19:13:01.3058 [eDVBText0] destroy
    < 8771.0573> 19:13:01.3059 [decoder][eDVBText] resetPID
    < 8771.0574> 19:13:01.3059 [decoder][eDVBText] freeCache
    < 8771.0618> 19:13:01.3104 [servicedvb][eDVBServicePlay] now running: m_is_streamx set by M_is_stream 0
    < 8771.0619> 19:13:01.3105 [servicedvb][eDVBServicePlay] now running: m_is_pvr set to; 1
    < 8771.0621> 19:13:01.3106 [servicedvb][eDVBServicePlay][start] m_is_stream set to: 0
    < 8771.0621> 19:13:01.3107 [servicedvb][eDVBServicePlay][start] m_is_pvr set to; 1
    < 8771.0624> 19:13:01.3109 [eDVBServicePMTHandler] alloc PVR
    < 8771.0625> 19:13:01.3110 [eDVBChannel] getDemux cap=00
    < 8771.0625> 19:13:01.3111 [eDVBResourceManager] allocate demux cap=00
    < 8771.0626> 19:13:01.3111 [eDVBResourceManager] allocating demux adapter=0, demux=8, source=-1 fesource=-1
    < 8771.0626> 19:13:01.3112 [eDVBDemux] open demux /dev/dvb/adapter0/demux8
    < 8771.0627> 19:13:01.3113 [eDVBTSTools] setSource loading streaminfo for /media/hdd/movie/20220506 1635 - LA 1 HD - DOWNTON ABBEY (T4).ts
    < 8771.0668> 19:13:01.3154 [eDVBDemux] open dvr /dev/dvb/adapter0/dvr8
    < 8771.0673> 19:13:01.3159 [eDVBServicePlay] cuts file has 2 entries
    < 8771.0675> 19:13:01.3160 [eDVBTSTools] calcBegin [@ML] m_streaminfo.getLastFrame returned 663452, 2152490224 (23916s), fixup to: 663452, 47730 (0s)
    < 8771.0902> 19:13:01.3388 [setIoPrio] best-effort level 0 ok
    < 8771.0902> 19:13:01.3388 [eDVBServicePMTHandler] ok ... now we start!!
    < 8771.0903> 19:13:01.3389 [eFilePushThread] START thread
    < 8771.0903> 19:13:01.3389 [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
    < 8771.0904> 19:13:01.3389 [eDVBServicePlay] have 1 video stream(s) (00ab), and 1 audio stream(s) (0092), and the pcr pid is 00ab, and the text pid is 0041
    < 8771.0906> 19:13:01.3392 [decoder][eDVBText] initCache
    < 8771.0951> 19:13:01.3437 [eTSMPEGDecoder] decoder state: play, vpid=00ab, apid=0092
    < 8771.0982> 19:13:01.3468 [eDVBAudio0] DMX_SET_PES_FILTER pid=0x0092 ok
    < 8771.0983> 19:13:01.3469 [eDVBAudio0] DEMUX_START ok
    < 8771.0985> 19:13:01.3470 [eDVBAudio0] AUDIO_SET_BYPASS bypass=0 ok
    < 8771.1076> 19:13:01.3561 [eDVBAudio0] AUDIO_PAUSE ok
    < 8771.1118> 19:13:01.3603 [eDVBAudio0] AUDIO_PLAY ok
    < 8771.1198> 19:13:01.3683 [eDVBVideo] Video Device: /dev/dvb/adapter0/video0
    < 8771.1199> 19:13:01.3685 [eDVBVideo] demux device: /dev/dvb/adapter0/demux8
    < 8771.1247> 19:13:01.3732 [eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
    < 8771.1293> 19:13:01.3778 [eDVBVideo0] DMX_SET_PES_FILTER pid=0x00ab ok
    < 8771.1294> 19:13:01.3779 [eDVBVideo0] DEMUX_START ok
    < 8771.1295> 19:13:01.3781 [eDVBVideo0] VIDEO_FREEZE ok
    < 8771.1336> 19:13:01.3822 [eDVBVideo0] VIDEO_PLAY ok
    < 8771.1435> 19:13:01.3920 [decoder][eDVBText] startPID entry M_is_stream 0
    < 8771.1436> 19:13:01.3921 [eDVBText0] DMX_SET_PES_FILTER pid=0x0041 ok
    < 8771.1437> 19:13:01.3922 [eDVBText0] DEMUX_START ok
    < 8771.1437> 19:13:01.3923 [decoder][eDVBText] startCaching M_is_stream 0
    < 8771.1477> 19:13:01.3963 [eDVBVideo0] VIDEO_SLOWMOTION 0 ok
    < 8771.1521> 19:13:01.4006 [eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
    < 8771.1565> 19:13:01.4051 [eDVBVideo0] VIDEO_CONTINUE ok
    < 8771.1612> 19:13:01.4098 [eDVBAudio0] AUDIO_CONTINUE ok
    < 8771.1702> 19:13:01.4187 [servicedvb][eDVBServicePlay] m_teletext_parser active
    < 8771.1703> 19:13:01.4189 [eDVBTeletextParser] Starting!
    < 8771.1704> 19:13:01.4190 [eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
    < 8771.1705> 19:13:01.4191 [eDVBPESReader] Created. Opening demux
    < 8771.1706> 19:13:01.4191 [eDVBDemux] open demux /dev/dvb/adapter0/demux8
    < 8771.1708> 19:13:01.4194 [eDVBTeletextParser] created teletext subtitle PES reader!
    < 8771.1711> 19:13:01.4196 [eDVBPESReader] Created. Opening demux
    < 8771.1712> 19:13:01.4197 [eDVBDemux] open demux /dev/dvb/adapter0/demux8
    < 8771.1715> 19:13:01.4200 [eDVBTeletextParser] starting PES reader on pid=0041
    < 8771.1716> 19:13:01.4201 [eDVBPESReader] DMX_SET_PES_FILTER pid=0041
    < 8771.1728> 19:13:01.4213 [Pixmap] setPixmapNum(0) failed! defined pixmaps: []
    < 8771.1735> 19:13:01.4220 [Pixmap] setPixmapNum(0) failed! defined pixmaps: []
    < 8771.1743> 19:13:01.4228 [eDVBServicePlay] seekTo 0
    < 8771.1744> 19:13:01.4229 [eDVBChannel] seek.
    < 8771.1744> 19:13:01.4230 [eFilePushThread] waiting for pause
    < 8771.1810> 19:13:01.4296 [eFilePushThread] PAUSED
    < 8771.2106> 19:13:01.4592 [eDVBAudio0] AUDIO_CLEAR_BUFFER ok
    < 8771.2347> 19:13:01.4832 [eDVBVideo0] VIDEO_CLEAR_BUFFER ok
    < 8771.2451> 19:13:01.4937 [eDVBChannel] ok, resolved skip (rel: 0, diff 0), now at 0
    < 8771.3009> 19:13:01.5494 [eDVBDemux] open demux /dev/dvb/adapter0/demux8
    < 8771.3012> 19:13:01.5497 [eDVBSectionReader] DMX_SET_FILTER pid=0
    < 8771.3046> 19:13:01.5532 [Notifications] RemovePopup, id = ZapError
    < 8771.4287> 19:13:01.6772 1:0:19:7863:41A:1:C00000:0:0:0::LA 1 HD 1:0:19:7863:41A:1:C00000:0:0:0::LA 1 HD
    < 8771.4293> 19:13:01.6779 [eDVBServicePlay] unpause
    < 8771.4298> 19:13:01.6783 [Pixmap] setPixmapNum(0) failed! defined pixmaps: []
    < 8771.4303> 19:13:01.6789 [Pixmap] setPixmapNum(0) failed! defined pixmaps: []
    < 8771.4323> 19:13:01.6808 [Pixmap] setPixmapNum(0) failed! defined pixmaps: []
    < 8771.4327> 19:13:01.6813 [Pixmap] setPixmapNum(0) failed! defined pixmaps: []
    < 8771.4425> 19:13:01.6911 [Skin] Processing screen 'MessageBoxSimple' from list 'MessageBoxSimple, MessageBox', position=(305, 355), size=(670 x 10) for module 'MessageBox'.
    < 8771.4671> 19:13:01.7156 [ePNG] loadSVG /usr/share/enigma2/skin_default/icons/input_question.svg 53x53 from 53x53
    < 8771.4813> 19:13:01.7299 [ePNG] loadSVG /usr/share/enigma2/skin_default/icons/input_error.svg 53x53 from 53x53
    < 8771.4841> 19:13:01.7326 [Screen] Warning: Skin is missing element 'icon' in <class 'Screens.MessageBox.MessageBox'>(Do you want to resume playback?
    Reanudar posiciĆ³n en 0:00:40.).< 8771.4843> 19:13:01.7328
    < 8771.4865> 19:13:01.7350 [Pixmap] setPixmapNum(0) failed! defined pixmaps: []
    < 8771.4875> 19:13:01.7361 [MessageBox] Timeout set to 30 seconds.
    < 8771.4912> 19:13:01.7398 Traceback (most recent call last):
    < 8771.4915> 19:13:01.7400 File "/usr/lib/enigma2/python/Navigation.py", line 93, in dispatchEvent
    < 8771.4941> 19:13:01.7427 x(i)
    < 8771.4943> 19:13:01.7429 File "/usr/lib/enigma2/python/Components/ServiceEventTracker.py", line 85, in event
    < 8771.4965> 19:13:01.7451 func[2]()
    < 8771.4967> 19:13:01.7452 File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 3866, in __serviceStarted
    < 8771.5134> 19:13:01.7620 Notifications.AddNotificationWithCallback(self.pla yLastCB, MessageBox, _("Do you want to resume playback?") + "\n" + (_("Resume position at %s") % ("%d:%02d:%02d" % (l / 3600, l % 3600 / 60, l % 60))), timeout=30, default="yes" in config.usage.on_movie_start.value)
    < 8771.5138> 19:13:01.7624 File "/usr/lib/enigma2/python/Tools/Notifications.py", line 23, in AddNotificationWithCallback
    < 8771.5158> 19:13:01.7644 __AddNotification(fnc, screen, None, *args, **kwargs)
    < 8771.5161> 19:13:01.7647 File "/usr/lib/enigma2/python/Tools/Notifications.py", line 15, in __AddNotification
    < 8771.5172> 19:13:01.7657 x()
    < 8771.5173> 19:13:01.7659 File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 3697, in checkNotificationsIfExecing
    < 8771.5334> 19:13:01.7819 self.checkNotifications()
    < 8771.5337> 19:13:01.7822 File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 3712, in checkNotifications
    < 8771.5487> 19:13:01.7973 dlg = self.session.openWithCallback(cb, n[1], *n[2], **n[3])
    < 8771.5489> 19:13:01.7974 File "/usr/lib/enigma2/python/StartEnigma.py", line 332, in openWithCallback
    < 8771.5509> 19:13:01.7994 dlg = self.open(screen, *arguments, **kwargs)
    < 8771.5512> 19:13:01.7998 File "/usr/lib/enigma2/python/StartEnigma.py", line 342, in open
    < 8771.5534> 19:13:01.8020 dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
    < 8771.5538> 19:13:01.8023 File "/usr/lib/enigma2/python/StartEnigma.py", line 279, in instantiateDialog
    < 8771.5563> 19:13:01.8049 return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
    < 8771.5565> 19:13:01.8051 File "/usr/lib/enigma2/python/StartEnigma.py", line 309, in doInstantiateDialog
    < 8771.5586> 19:13:01.8072 dlg.applySkin()
    < 8771.5588> 19:13:01.8073 File "/usr/lib/enigma2/python/Screens/Screen.py", line 249, in applySkin
    < 8771.5606> 19:13:01.8091 self.createGUIScreen(self.instance, self.desktop)
    < 8771.8949> 19:13:02.1434 File "/usr/lib/enigma2/python/Screens/Screen.py", line 277, in createGUIScreen
    < 8771.8969> 19:13:02.1455 exec(f, globals(), locals()) # Python 3
    < 8771.8973> 19:13:02.1458 File "skin applet", line 22, in <module>
    < 8771.8986> 19:13:02.1472 File "/usr/lib/enigma2/python/enigma.py", line 1211, in __init__
    < 8771.9046> 19:13:02.1532 _enigma.ePoint_swiginit(self, _enigma.new_ePoint(*args))
    < 8771.9048> 19:13:02.1534 TypeError: in method 'new_ePoint', argument 1 of type 'int'
    Additional information:
    Wrong number or type of arguments for overloaded function 'new_ePoint'.
    Possible C/C++ prototypes are:
    ePoint::ePoint()
    ePoint::ePoint(int,int)
    < 8771.9050> 19:13:02.1536
    < 8771.9054> 19:13:02.1539 [ePyObject] (CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation object at 0x72feeb38>>,(0,)) failed)


    dmesg

    <4>[VID]: VIDEO_SET_STREAMTYPE 0
    <4>[VID]: VIDEO_SELECT_SOURCE 1 1
    <4>[VID]: VIDEO_PLAY 1 2 0
    <4>[VID]: VIDEO_CONTINUE 1 1
    <4>[VID]: VIDEO_CLEAR_BUFFER 1 1 0
    <4>[VID]: VIDEO_STOP 0 1
    <4>[VID]: VIDEO_SELECT_SOURCE 0 0
    <4>misc_vtuner_realloc_pp 0 1
    <6>BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vu+ Turbo Frontend : DVB-C/T2)...
    <3>[DFP]: unknown cmd 0x540d
    <3>[DFP]: unknown cmd 0x540d
    <3>[DFP]: unknown cmd 0x540d
    <3>[DFP]: unknown cmd 0x540d
    <4>[AUD]: AUDIO_SET_MUTE 0
    <4>[AUD]: AUDIO_SET_MIXER -824230408
    <4>[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
    <4>[AUD]: AUDIO_SET_MIXER : next left volume -3498, right volume -3498
    <4>[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    <4>[AUD]: AUDIO_SET_MIXER -824230408
    <4>[AUD]: AUDIO_SET_MIXER : amixl 63, amixr 63
    <4>[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    <4>[AUD]: AUDIO_SET_MIXER : next left volume -4570, right volume -4570
    <4>FE tune
    <4>[AUD]: AUDIO_SELECT_SOURCE 0
    <4>[AUD]: AUDIO_SELECT_SOURCE clean up
    <4>[AUD]: AUDIO_SET_BYPASS_MODE 0
    <4>[AUD]: AC3 downmix 0 state : 0
    <4>[AUD]: AUDIO_PAUSE 18520584
    <4>[AUD]: AUDIO_PLAY 18520584 decoder start : 0
    <4>[VID]: VIDEO_SELECT_SOURCE 0 0
    <4>[VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080
    <4>[VID]: VIDEO_GET_SIZE aspect: 1 1
    <4>[VID]: VIDEO_SET_STREAMTYPE 1
    <4>[VID]: VIDEO_FREEZE 18520584 0
    <4>[VID]: VIDEO_PLAY 18520584 5 2
    <4>[VID]: VIDEO_SLOWMOTION 0 1
    <4>[VID]: VIDEO_FAST_FORWARD 0 1
    <4>[VID]: VIDEO_CONTINUE 18520584 1
    <4>[AUD]: AUDIO_CONTINUE 18520584 1 aph=0xcf016a80
    <4>[AUD]: Mute : 0
    <4>[AUD]: AUDIO_CHANNEL_SELECT 0
    <4>[AUD]: AUDIO_STOP 18658384
    <4>[AUD]: AUDIO_CONTINUE 18658384 0 aph=0x0
    <4>[AUD]: AUDIO_CONTINUE aph=0 0 0
    <4>[AUD]: AUDIO_SELECT_SOURCE 0
    <4>[AUD]: AUDIO_SET_BYPASS_MODE 1
    <4>[AUD]: downmix 0 state : 0
    <4>[AUD]: AUDIO_PAUSE 18658384
    <4>[AUD]: AUDIO_PLAY 18658384 decoder start : 0
    <4>[AUD]: AUDIO_CONTINUE 18658384 1 aph=0xcf016a00
    <4>[AUD]: Mute : 0
    <4>[VID]: VIDEO_STOP 1 1
    <4>[AUD]: AUDIO_STOP 18943816
    <4>[AUD]: AUDIO_CONTINUE 18943816 0 aph=0x0
    <4>[AUD]: AUDIO_CONTINUE aph=0 0 0
    <4>[AUD]: AUDIO_SELECT_SOURCE 0
    <4>[AUD]: AUDIO_SET_BYPASS_MODE 0
    <4>[AUD]: AC3 downmix 0 state : 0
    <4>[AUD]: AUDIO_PAUSE 18943816
    <4>[AUD]: AUDIO_PLAY 18943816 decoder start : 0
    <4>[VID]: VIDEO_SELECT_SOURCE 0 0
    <4>[VID]: VIDEO_SET_STREAMTYPE 1
    <4>[VID]: VIDEO_FREEZE 18943816 0
    <4>[VID]: VIDEO_PLAY 18943816 5 2
    <4>[VID]: VIDEO_SLOWMOTION 0 1
    <4>[VID]: VIDEO_FAST_FORWARD 0 1
    <4>[VID]: VIDEO_CONTINUE 18943816 1
    <4>[AUD]: AUDIO_CONTINUE 18943816 1 aph=0xcc5f6280
    <4>[AUD]: Mute : 0
    <4>[AUD]: AUDIO_CLEAR_BUFFER 1 0
    <4>[VID]: VIDEO_CLEAR_BUFFER 18943816 1 1
    <4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
    <4>[VID]: VIDEO_GET_SIZE aspect: 1 0
    <4>[AUD]: AUDIO_STOP 18933752
    <4>[AUD]: AUDIO_CONTINUE 18933752 0 aph=0x0
    <4>[AUD]: AUDIO_CONTINUE aph=0 0 0
    <4>[AUD]: AUDIO_SELECT_SOURCE 0
    <4>[AUD]: AUDIO_SET_BYPASS_MODE 1
    <4>[AUD]: downmix 0 state : 0
    <4>[AUD]: AUDIO_PAUSE 18933752
    <4>[AUD]: AUDIO_PLAY 18933752 decoder start : 0
    <4>[AUD]: AUDIO_CONTINUE 18933752 1 aph=0xc0c25880
    <4>[AUD]: Mute : 0
    <4>[VID]: VIDEO_STOP 1 1
    <4>[AUD]: AUDIO_STOP 18975032
    <4>[AUD]: AUDIO_CONTINUE 18975032 0 aph=0x0
    <4>[AUD]: AUDIO_CONTINUE aph=0 0 0
    <4>[AUD]: AUDIO_SELECT_SOURCE 0
    <4>[AUD]: AUDIO_SET_BYPASS_MODE 0
    <4>[AUD]: AC3 downmix 0 state : 0
    <4>[AUD]: AUDIO_PAUSE 18950224
    <4>[AUD]: AUDIO_PLAY 18950224 decoder start : 0
    <4>[VID]: VIDEO_SELECT_SOURCE 0 0
    <4>[VID]: VIDEO_SET_STREAMTYPE 1
    <4>[VID]: VIDEO_FREEZE 18950360 0
    <4>[VID]: VIDEO_PLAY 18950360 5 2
    <4>[VID]: VIDEO_SLOWMOTION 0 1
    <4>[VID]: VIDEO_FAST_FORWARD 0 1
    <4>[VID]: VIDEO_CONTINUE 18950360 1
    <4>[AUD]: AUDIO_CONTINUE 18950360 1 aph=0xcf016e80
    <4>[AUD]: Mute : 0
    <4>[AUD]: AUDIO_CLEAR_BUFFER 1 0
    <4>[VID]: VIDEO_CLEAR_BUFFER 18951016 1 1
    <4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
    <4>[VID]: VIDEO_GET_SIZE aspect: 1 0

  9. #9
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    7,422
    Thanks
    896
    Thanked 2,581 Times in 1,979 Posts
    Its the skin pli-hd-night whiich is not fully python3. Try one of the usual skins simple ten eighty
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  10. #10

    Title
    Member
    Join Date
    Oct 2016
    Posts
    63
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I did yesterday and is working perfectly. Thank you very much for all your help

  11. #11
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    22,520
    Thanks
    6,073
    Thanked 8,813 Times in 5,953 Posts
    People who want to use fat32/exfat devices may want to wish to use other images. Apart from the file size limits, absolutely nothing wrong with those filesystems. They have always worked on vix for recording for people who want to move USB device among devices.

    That being said, ext file system is best.

  12. #12
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    11,811
    Thanks
    1,888
    Thanked 4,166 Times in 2,762 Posts
    Quote Originally Posted by abu baniaz View Post
    People who want to use fat32/exfat devices may want to wish to use other images. Apart from the file size limits, absolutely nothing wrong with those filesystems. They have always worked on vix for recording for people who want to move USB device among devices.

    That being said, ext file system is best.
    I can't believe you are recommending other images based on this untruth. Fat32 does not support hard links. The difference between us and others is we deal with it in the setup whereas with other images the user finds it doesn't work when timeshift fails.

  13. #13
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    22,520
    Thanks
    6,073
    Thanked 8,813 Times in 5,953 Posts
    What are hardlinks used for recording purposes?
    If ViX have disabled fat32 and exfat devices, what are people who need those supposed to do?

  14. #14
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    11,811
    Thanks
    1,888
    Thanked 4,166 Times in 2,762 Posts
    1) Hardlinks are used for timeshift.
    2) We don't stop people configuring fat32 devices... just not for recording.

  15. #15
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    22,520
    Thanks
    6,073
    Thanked 8,813 Times in 5,953 Posts
    OK, thanks for confirming hardlinks are irrelevant to recording, only relevant to timeshift.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.