No automatic boot after flashing online

[skippie]

Hi, since awhile my VU+ Ultimo 4k is not rebooting automatically anymore after flashing online. Also after updating i have to hard reboot to restart. Any ideas ?
After flashing online it is stuck at the end of flashing screen and saying rebooting in 3 secs but it doesn't happen.

[twol]

Hi, since awhile my VU+ Ultimo 4k is not rebooting automatically anymore after flashing online. Also after updating i have to hard reboot to restart. Any ideas ?
After flashing online it is stuck at the end of flashing screen and saying rebooting in 3 secs but it doesn't happen.

1. make sure debug logs are enabled and saved on HDD or usb not flash.
2. there are apparently 2 different issues described a) it doesn't reboot automatically, and b) when forced (I guess by powering on/off) you see the old image or new image???

I am guessing that ofgwrite (that flashes the image) is failing as it issues the reboot for the Vu+ Ultimo4k - so if possible I would like to see the debug log for the attempted online flash

[skippie]

The update/flashing is being done, all the time but the box doesn't reboot by itself anymore, i always have to hard reboot by switching off and on at the back of the receiver. Also rebooting doesn't work auto anymore, it reboots but i have to switch off and on again at the back. No logs atm. I do a simple reboot, that will show a log i suppose. Also it takes very long before i get a picture after a reboot, about 4 minutes. As soon as i'm back online i look for a log to send. Please here is the log.

[ccs]

Are you doing a software update, or couch flashing a new image ?

And which image were you running before ?

[twol]

The update/flashing is being done, all the time but the box doesn't reboot by itself anymore, i always have to hard reboot by switching off and on at the back of the receiver. Also rebooting doesn't work auto anymore, it reboots but i have to switch off and on again at the back. No logs atm. I do a simple reboot, that will show a log i suppose. Also it takes very long before i get a picture after a reboot, about 4 minutes. As soon as i'm back online i look for a log to send.

Need some debug logs

[skippie]

the receiver NEVER reboots automatically, whenever i do a couch flashing a new image or software update. It reboots when i flash a new image by USB but once the image booted up and i reboot again i have to hard reboot.

[skippie]

Log available.

[twol]

Log available.

where?????!
sounds like its crashing as it tries to enter standby, so any log upto power off should do

[skippie]

Please here it is :

[skippie]

Set to standby or Deep standby ?

[twol]

Please here it is :

that shows you looking to see which logs are present, but doesn't show any attempt to enter standby.(which would show in the log)

Maybe post whatever debug logs you have

[skippie]

Please here it is : Sorry ignore the log from 2017.

This is the only log i have so far.

[twol]

have you set power timers for standby??
Looks like as soon as you hit standby there is a power timer option that forces it to be ignored

look at menu/Timers/powertimers

[twol]

It would also help(me) if you set log time to "local time"

[skippie]

No, never done that.