small text size in one menu page

[Huevos]

What is the Vix_1080_Common skin?

It is the part of the skin that is shared by ViX-Day and ViX-Night.

@ccs, can you load skins load ViX-Night-1080 and ViX-1080-common from 003 and see if you still have the problem. Just retrieve them complete from your 003 image.

[ccs]

003 has ViX-Night-HD and ViX-Common, do you want me to copy their contents to ViX-Night-1080 and ViX-1080-Common (in 006)?

[ccs]

003 has ViX-Night-HD and ViX-Common, do you want me to copy their contents to ViX-Night-1080 and ViX-1080-Common (in 006)?

That's what I've done, and so far so good, even coming out of deep standby is ok.

[Huevos]

And make sure the old ViX-Night and ViX-Common folders are not present.

[Huevos]

@adm, switch to ViX-Night-HD as that is what you were using in 003. Download from the feeds. Please report back.

[adm]

@adm, switch to ViX-Night-HD as that is what you were using in 003. Download from the feeds. Please report back.

On 6.0.003 I installed and changed to the simple_ten_eighty skin. I then uninstalled all other skins except the default.

Via the image manager I downloaded 6.0.006 and flashed the same – restored settings from .003. From the plug-in menu downloaded the skin and changed to it.

The small text in the first post has gone – its now “normal size”.
Any lock-up/freeze may not be seen until I have put the box into standby for a number of hours.

Fingers crossed its working – thank you.

[Rob van der Does]

Xtrend ET10000, SkinVix-Night-1080

I have my box configured that when I press the EPG button on my remote I first get a screen where I can first select the bouquet.

Configuration:
Open the epg grid screen and press menu on the remote and in the configuration menu that appears - select “Show bouquet on launch = yes”

I’ve just performed a software upgrade from 6.0.003 to 6.0.006
In 6.0.003 the text to select the bouquet was a “normal” size
In 6.0.006 the text size has shrunk to barely readable.

Attachment 63195

All other menu screens seem to have the same text size as set in 6.0.003.

Thanks for reporting: will be fixed in next update.