Sperate Picons for LCD location ?

[misiozol]

Well have installed picons to usr/share/enigma2/picons all working fine icons are shown in channel selection and on display however would like to have different picons for LCD display and for channel list , what would be location of picons for LCD, in menu under "menu>setup>user interface>front panel display>settings>Use seperate picon packfor front display" but there is no path for it, where it would be its location in flash ?

[abu baniaz]

You have to create the folder yourself on your storage device/intel flash. There are two allowable names 'lcd_picon', and 'piconlcd'. Beset to use 'piconlcd' as that is what some other images use too.

https://github.com/OpenViX/enigma2/b...cdPicon.py#L23

[misiozol]

none of them working, still picons are not set, did try those names, question is should piconlcd folder be in picon folder or beside it ?

[misiozol]

Something must be messed up as no matter what I do it's just do not see picons for LCD , I have used multiple names combinations with root folder, placing inside and both out side just in root and in share folder no luck , there must be bug in image

[abu baniaz]

Please an exact list of the locations you are using and some example picon names. Debug log would be better.

The piconlcd folder must be separate/outside/beside the normal picon folder

[Joe_90]

Just to add - in Setup/User Interface/Front Panel Display you need to set skin default to default+picon in order to display the picons on the LCD.

[misiozol]

You actually read first post ? ALL IS WORKING I WANT SEPARATE LOOKING PICONS FOR LCD .

[Joe_90]

You actually read first post ? ALL IS WORKING I WANT SEPARATE LOOKING PICONS FOR LCD .

A thousand apologies!

[misiozol]

Please an exact list of the locations you are using and some example picon names. Debug log would be better.

The piconlcd folder must be separate/outside/beside the normal picon folder

locations and tested variants

/picon {standard picon folder with picons by service name/TP info, all working perfect, picons are in channel list and on display from this folder}
/usr/share/enigma2/picon, same as above working perfect

not working

/lcdpicon(s)
/picon(s)lcd
/lcd_picon(s)
/picon_lcd
/usr/share/enigma2/ {plus all folder variants from above lcdpicon,piconslcd etc.}

All diferent picons tested by service name/TP info diferent variaties of sizes none of them is working in lcd folders above, but working perfect with picon regular folder and is displayed in channel list and on lcd no issue there when in options chosen {not to seperate icons pack for lcd} , if chosen yes to separate have VIX name on LCD instead of picon .

A thousand apologies!

No problem

[ccs]

Not sure if this is relevant.....

I have reported issue to Gigablue. It seems they have a problem dealing with 8bit images. This includes the default_picon in images. Convert to 32 bit and they are fine.

May I take the opportunity to remind people ViX has function to use a separate picon folder for LCD picons. They can be placed in a folder called picon_lcd

Menu > Setup > Front Panel Display > Settings > Use separate picon pack for front display

[misiozol]

Not sure if this is relevant.....

Picons are working perfect, issue is with LCD picons. please read from begining.

[ccs]

Picons are working perfect, issue is with LCD picons. please read from begining.

I did, as you are wanting to use different lcd picons, I thought it might have helped, but obviously not.

[misiozol]

Picons are working and are good and are shown, there is issue with image, as if it would be with picons they would not work at all , however if you have any picons 32bit please send few and I will give it a go who knows maybe it's so simple .

[Huevos]

Sorry to ask the obvious, but...

Did you actually enable the use of separate location for LCD picons in Front panel settings, because the default is "no"?

1.jpg

[misiozol]

Sorry to ask the obvious, but...

Did you actually enable the use of separate location for LCD picons in Front panel settings, because the default is "no"?

1.jpg

Now c'mon serously ? Please read post no. 9