Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 7 of 7

Thread: HELP Reset emmc gigablue uhd quad 4k

  1. #1

    Title
    Junior Member
    Join Date
    Apr 2011
    Location
    UK
    Posts
    17
    Thanks
    3
    Thanked 0 Times in 0 Posts

    Lightbulb HELP Reset emmc gigablue uhd quad 4k

    Hi guys,
    I just bought a new Gigablue UHD Quad 4K, with preinstalled the latest OpenVix image.
    Then I've installed the Teamblue image myself.
    After playing a little bit with the Teamblue image I've installed also the OpenATV image.
    Now I from the Multiboot option I do see only Openvix on slot 1 and OpenATV on slot 2 and
    a third slot still available. But there is no sign of the slot with Teamblue. Where it is?

    Please can someone advise me on how to reset from the scratch the EMMC?
    Thanks a lot

  2. #2
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by satellino View Post
    Hi guys,
    I just bought a new Gigablue UHD Quad 4K, with preinstalled the latest OpenVix image.
    Then I've installed the Teamblue image myself.
    After playing a little bit with the Teamblue image I've installed also the OpenATV image.
    Now I from the Multiboot option I do see only Openvix on slot 1 and OpenATV on slot 2 and
    a third slot still available. But there is no sign of the slot with Teamblue. Where it is?

    Please can someone advise me on how to reset from the scratch the EMMC?
    Thanks a lot
    Can only think you overwrote with OpenATV image.
    What do you mean by reset?
    You can flash a slot which will overwrite any installed image in that slot or in many images (certainly in OpenViX, delete the contents of a slot)
    On the Giga4K boxes, usb flashing will not remove images in slots 2 & 3, just slot1
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  3. #3

    Title
    Junior Member
    Join Date
    Apr 2011
    Location
    UK
    Posts
    17
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by twol View Post
    Can only think you overwrote with OpenATV image.
    What do you mean by reset?
    You can flash a slot which will overwrite any installed image in that slot or in many images (certainly in OpenViX, delete the contents of a slot)
    On the Giga4K boxes, usb flashing will not remove images in slots 2 & 3, just slot1

    Thanks twol! You were right! I did solve the problem, just deleting one slot and replacing the other one with the Teamblue again.
    I thought the Gigablue had 4 slots, but I understand that it has only three slots.

    One last thing:
    I want to create a multiroom environment using as the main receiver the GIGABLUE UHD QUAD 4K -connected to the sat antenna - and as the second one the EDISION Mio 4K Plus on another room where I do not have access to any antenna cable. So basically I want my EDISION to receive the signal from the GIGABLUE. Do you think it would be possible? (I see you got both of the receivers).
    Please can you indicate to me which thread talks about the subject? Or any other help from your personal experience will be much appreciated.
    Thanks again!

  4. #4
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Providing you have internet access through lan(preferable) or wifi then tuner setup choose client server mode. Configure with your gb4k,s ip address and password … and thats it.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  5. #5

    Title
    Junior Member
    Join Date
    Apr 2011
    Location
    UK
    Posts
    17
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by twol View Post
    Providing you have internet access through lan(preferable) or wifi then tuner setup choose client server mode. Configure with your gb4k,s ip address and password … and thats it.
    Sorry, on what image? Because I'm currently using TeamBlue and I did not see this feature.
    Thanks

  6. #6
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    OpenViX. OpenPli also have a version
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  7. The Following User Says Thank You to twol For This Useful Post:

    satellino (04-07-21)

  8. #7

    Title
    Junior Member
    Join Date
    Apr 2011
    Location
    UK
    Posts
    17
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Thanks twol! It works flawlessly !!!

    I've tried (1) the client mode with Openvix and (2) the gbipboxclient plugin when on OpenATV. Either way, they work fine.
    I was unsure what would happen if I change the channels on the Gigablue (which works as the server), would that stop the EDISION Mio 4K Plus (which is the client) to keep streaming the channel(s)?
    Well, It seems that this doesn't affect the vision of any channel. Probably because -for the first time - I got a dual-tuner :-)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.