Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: Testers required for python3 Crossepg

  1. #1
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    6,657
    Thanks
    833
    Thanked 2,345 Times in 1,794 Posts

    Testers required for python3 Crossepg

    The current feeds have a version of Crossepg that does not support python3 images.
    The attached ipk hopefully supports python3 and python2, so I would be keen for people to test on the python3 builds and if possible also install on python2.

    There have been many changes to get this to work, and I am hopeful that the code will handle both python images.

    Download the attached ipk, copy to /tmp and then use the ipk installer in the ViX plugin to install.

    Please give feedback and post any crash logs here.

    (I know it says version is not recognised - still have to look at that situation!)
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  2. The Following 2 Users Say Thank You to twol For This Useful Post:

    ronand (29-06-21),Sicilian (29-06-21)

  3. #2
    dsayers's Avatar
    Title
    Senior Member
    Join Date
    Mar 2016
    Posts
    1,396
    Thanks
    391
    Thanked 509 Times in 357 Posts
    Issues with install

    Code:
    Welcome to OpenViX for vuuno4k
    openvix 5.5 vuuno4k
    
    root@vuuno4k:~# opkg install /tmp/*.ipk
    Not selecting enigma2-plugin-systemplugins-crossepg 0.8.7+gitr504+c4aef77 due to incompatible architecture.
    Installing xz (5.2.5) on root.
    Installing enigma2-plugin-systemplugins-crossepg (0.8.7+gitr502+52d64b5) on root.
    Configuring xz.
    update-alternatives: Linking /usr/bin/xz to /usr/bin/xz.xz
    update-alternatives: Linking /usr/bin/xzcat to /usr/bin/xzcat.xz
    update-alternatives: Linking /usr/bin/unxz to /usr/bin/unxz.xz
    update-alternatives: Linking /usr/bin/lzma to /usr/bin/lzma.xz
    update-alternatives: Linking /usr/bin/lzcat to /usr/bin/lzcat.xz
    update-alternatives: Linking /usr/bin/unlzma to /usr/bin/unlzma.xz
    Configuring enigma2-plugin-systemplugins-crossepg.
    root@vuuno4k:~#
    Just noticed shouldn't it be all.ipk?
    Last edited by dsayers; 29-06-21 at 13:48.

  4. #3

    Title
    ViX Beta Tester
    Join Date
    Apr 2011
    Location
    Ireland
    Posts
    1,800
    Thanks
    375
    Thanked 593 Times in 482 Posts
    Zgemma H7S running OpenVIX 5.4, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
    LG 50UM7450 4K TV, Pioneer VSX-534 AVR , LG UBK80 4K Bluray & a Playstation 4.

  5. #4
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    6,657
    Thanks
    833
    Thanked 2,345 Times in 1,794 Posts
    OK - what boxes do you have - I assumed wrongly it would be architecture free
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  6. #5
    dsayers's Avatar
    Title
    Senior Member
    Join Date
    Mar 2016
    Posts
    1,396
    Thanks
    391
    Thanked 509 Times in 357 Posts
    Vu+Uno 4k running the python 3 test image. Looking at the ipk it was built with a gb?


    You might be able to re compile the ipk for all

  7. #6
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    6,657
    Thanks
    833
    Thanked 2,345 Times in 1,794 Posts
    Quote Originally Posted by dsayers View Post
    Vu+Uno 4k running the python 3 test image. Looking at the ipk it was built with a gb?


    You might be able to re compile the ipk for all
    Yes, built for the GB4k
    Its such a complex handful, with directories and files all over the place - am not sure
    will run a build for Vu+ 4k.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  8. #7

    Title
    ViX Beta Tester
    Join Date
    Apr 2011
    Location
    Ireland
    Posts
    1,800
    Thanks
    375
    Thanked 593 Times in 482 Posts
    Using a zgemma h7s here.
    Zgemma H7S running OpenVIX 5.4, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
    LG 50UM7450 4K TV, Pioneer VSX-534 AVR , LG UBK80 4K Bluray & a Playstation 4.

  9. #8
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    6,657
    Thanks
    833
    Thanked 2,345 Times in 1,794 Posts
    Quote Originally Posted by ronand View Post
    Using a zgemma h7s here.
    OK, will post again probably tomorrow morning!
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  10. #9
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    6,657
    Thanks
    833
    Thanked 2,345 Times in 1,794 Posts
    try these, one for Vuuno4k(I guess all Vu 4K) and Zgemma h7.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  11. The Following User Says Thank You to twol For This Useful Post:

    ronand (30-06-21)

  12. #10

    Title
    ViX Beta Tester
    Join Date
    Apr 2011
    Location
    Ireland
    Posts
    1,800
    Thanks
    375
    Thanked 593 Times in 482 Posts
    Zgemma H7S running OpenVIX 5.4, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
    LG 50UM7450 4K TV, Pioneer VSX-534 AVR , LG UBK80 4K Bluray & a Playstation 4.

  13. #11
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    6,657
    Thanks
    833
    Thanked 2,345 Times in 1,794 Posts
    So you need my feeds from last nights builds.
    1. unzip the appropiate feeds file url's below: h7 8 files, vuuno4k 7 files
    2. Stop the box. putty ---> init 4
    3. filezilla locate /etc/opkg and rename the feed url's in that folder, then copy over the unzipped files
    4. putty ---> init 6 reboot to pick up new feeds.
    5. go to plugins, green button and download/install Crossepg - should now find all the reqs in the feeds.



    and flash image (h7 to new slot)
    Attached Files Attached Files
    Last edited by twol; 01-07-21 at 08:18.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  14. The Following User Says Thank You to twol For This Useful Post:

    ronand (30-06-21)

  15. #12
    Huevos's Avatar
    Title
    Moderator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    10,275
    Thanks
    1,791
    Thanked 3,782 Times in 2,492 Posts
    Quote Originally Posted by twol View Post
    OK - what boxes do you have - I assumed wrongly it would be architecture free
    It has compiled c code.

  16. #13

    Title
    ViX Beta Tester
    Join Date
    Apr 2011
    Location
    Ireland
    Posts
    1,800
    Thanks
    375
    Thanked 593 Times in 482 Posts
    Ok. It is working (just about) on 5.5.013.017. There seems to be lots of gaps in the downloaded data. Whether it is worthwhile getting this to work properly is open for debate considering the alternatives available. The main reason I prefer to use it is that downloads can be scheduled. With the opentv downloader you can only change the interval but not the actual download time - I try to reduce the amount of times my motor moves during the day (even though I have a dedicated dish for 28e). Maybe epgrefresh is more suitable with configurable start/stop times
    Zgemma H7S running OpenVIX 5.4, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
    LG 50UM7450 4K TV, Pioneer VSX-534 AVR , LG UBK80 4K Bluray & a Playstation 4.

  17. #14
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    6,657
    Thanks
    833
    Thanked 2,345 Times in 1,794 Posts
    OK - so I will probably just issue a Pull on OE-Alliance and at least get it python3 available. It is not a plugin I have used as even in python2 I found the data sources not that good.
    It could be that some of the files are not parsing correctly but there is no logging if that is the case - certainly I do get EPG‘s for both German and English channels, but it takes ages to run compared to other options.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  18. #15
    dsayers's Avatar
    Title
    Senior Member
    Join Date
    Mar 2016
    Posts
    1,396
    Thanks
    391
    Thanked 509 Times in 357 Posts
    It seems to go through the process and parsing channels but I don't see any epg data.

    I haven't used crossepg for a while so it's not important to me

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.