Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 5 of 5

Thread: Finding which cable goes to lnb

  1. #1

    Title
    Senior Member
    Join Date
    Oct 2012
    Posts
    234
    Thanks
    73
    Thanked 12 Times in 7 Posts

    Finding which cable goes to lnb

    Have a twin lnb with one cable going to the motor then the 2 cables run to tm twin oe. Now the problem is I disconnected the cables last year at the box and want to set this up again, so box was reset at the time, so I was thinking connect one cable to lnb 1 input and see if the motor moves when a different sat is input and that would let me know if that cable is the one that controls the motor. So I remember how to set my location but what do I set the tuners to in the settings ?
    Thanks

  2. #2

    Title
    Senior Member
    Join Date
    Aug 2010
    Posts
    282
    Thanks
    189
    Thanked 40 Times in 36 Posts
    To set your location you would need to use USALS and to get to that the tuner mode would be positioner but I guess you have figured that out by now. What image are you using out of interest?

  3. #3

    Title
    Senior Member
    Join Date
    Oct 2012
    Posts
    234
    Thanks
    73
    Thanked 12 Times in 7 Posts
    I think it’s the last fix from a few years back when they dropped support, I can set it all up but it’s when it asks to set the cables up that I forget

  4. #4
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    Surely the cables are already connected? Only problems is that you don't know which is which.

    If you are asking how to you configure/set the tuner? See here for the motorised one:
    https://www.world-of-satellite.com/s...l=1#post444262

    Setup/configure Tuner A only. Disable Tuner B (set as not configured)
    Connect one cable at a time to Tuner A. If the dish moves, you have the motorised wire. If it doesn't, try the other cable. Hopefully that moves the dish. Then put a label on the cables.

    Once you know which is which, the cable that bypasses the motor and goes directly to LNB is set/configured as: second cable of motorised LNB

  5. The Following 2 Users Say Thank You to abu baniaz For This Useful Post:

    robti (07-03-21)

  6. #5

    Title
    Senior Member
    Join Date
    Oct 2012
    Posts
    234
    Thanks
    73
    Thanked 12 Times in 7 Posts
    Quote Originally Posted by abu baniaz View Post
    Surely the cables are already connected? Only problems is that you don't know which is which.

    If you are asking how to you configure/set the tuner? See here for the motorised one:
    https://www.world-of-satellite.com/s...l=1#post444262

    Setup/configure Tuner A only. Disable Tuner B (set as not configured)
    Connect one cable at a time to Tuner A. If the dish moves, you have the motorised wire. If it doesn't, try the other cable. Hopefully that moves the dish. Then put a label on the cables.

    Once you know which is which, the cable that bypasses the motor and goes directly to LNB is set/configured as: second cable of motorised LNB
    Thanks cables were disconnected and for some reason marked the wrong way round (admit it was my fault) so I have already set it up and only came back on to ask about tuner B set up which you have very kindly answered for me, many thanks off to set it up

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.