Dual tuner streaming

[slacker17]

Does picture in picture work?

[sebus]

Anybody any ideas at all?

[twol]

If you are using pure2 which is what your signature says, then I would suggest you flash openvix and try that…..I have no idea what pure2 are based on as they block access to their code ( they are obviously superior to everybody else), but I assume its openatv which uses different code for tuners.

[BrianG61UK]

It does not matter what channels they are, it is the same for each & any pair (same transponder = both fine, different transponders = only first one "wins")
Also it makes no difference in behaviour if they are FTA or encrypted channels

So it behaves like only one Tuner is working.
Check both tuners are correctly connected and correctly configured.

[Huevos]

If you don't have openvix loaded you are posting on the wrong forum.

[JonMMM]

Your signature shows you have a motorised setup are both channels on the same satellite?

[sebus]

No, I do not have openvix

4 way LNB, 1 direct cable goes to tuner A, second direct cable goes to tuner B


H7S has only a single port per each tuner, so impossible to connect in any other way


Tuner A = USALS

Tuner B = Second cable from motorized LNB

I can watch a channel on TV & stream another to PC ONLY if they both come from same transponder (that also means same satellite)


If they are on different transponders (on SAME satellite) only the first channel wins (whichever one was accessed first, either on TV or via stream)

[twol]

You are going to have to specify which image you are using because its one area that maybe different between images in the C++. code

[sebus]

Correct info is in signature

PurE2 7.3.001 (2023-08-18)

[twol]

Correct info is in signature

PurE2 7.3.001 (2023-08-18)

That is not a public image, so cannot even view the code to see what is the setup.