Hi all,

I need your help.

I have been told by someone on the other forum that I have set up incorrect settings when I setup the rig on dead straight (remember with 3 dots) with motor set to 0 then I moved the whole rig to 0.8west with motor set to 0. He said that it should be 2-3 degree.

Do the motor need to be on 0 when I move the rig on dead straight like 12 o clock and do the dish need to be 2-3 gree when I move the dish to 0.8west?

If not, do I need to move the whole rig to 0.8west with the motor set to 0 as the motor is not on dead straight?

I think I have setup incorrect as the motor is not on dead straight when I moved the whole rig to 0.8west with the motor set to 0. I guess the motor need to be on dead straight as the motor set to 0 and I think I need to undo the nuts on the brackets that holds on the motor arm to move the dish to 0.8west.

Please let me know which one of them is correct.

Any advice would be much appreciated.