Hi there is any one can help since last up date can not control my box with tv remote any more tried every thing to get working do I have down grade to previous version
Hi there is any one can help since last up date can not control my box with tv remote any more tried every thing to get working do I have down grade to previous version
so it does support hdmi cec any more no replies
turn on debug logs menu/system logs/setting and save somewhere safe. Reboot and post log here
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Its probably best to turn off HDMI CEC on the box and TV, reboot both devices and turn on again. HDMI CEC is flaky but it should work.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
I turn on the Vix box with its remote. The Vix box then turns on the TV using HDMI CEC and I am holding the remote to select the channel I want to watch. I use the Vix box remote to turn everything off.
I do need the TV remote to adjust the sound volume.
In the HDMI-CEC settings there is a setting "Forward volume keys". When enabled it allows the Vix box's remote control to control the TV volume.
Kind regards,
Mick
I also have a Mut@nt HD51 and it works OK here with a Sony TV and Yamaha AVR. As already mentioned HDMI-CEC can be a hit & miss affair with some devices cooperating nicely and others refusing to do so. An approach worth trying is to power down the TV - pull the plug. Then power up the Mut@nt and disable, then re-enable HDMI-CEC. Finally power up the TV and see if the HDMI-CEC handshake between the devices has been initialised successfully.
There's also a plugin to allow testing of HDMI-CEC signals, but I haven't used it.
Good luck.
Kind regards,
Mick
Its also worth trying a new hdmi cable. I recently had a problem where the tv wouldn't switch to the correct input - the problem was the cable.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.