Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.

View Entry Info: Unable to restore settings backup on ViX 5.4.004

Category:
Possible Bug
What ViX Image build number are you using?
Please provide your ViX Team image build number. Menu > Information > About > Build number > ENTER THIS NUMBER e.g. 4.2.028
5.4.004
Have you tried a flash WITHOUT settings restore?
Have you tried this? PLEASE SELECT YES OR NO.
Yes
Have you tried a flash WITH settings restore?
Have you tried this? PLEASE SELECT YES OR NO.
Yes
Results 1 to 9 of 9

Thread: Unable to restore settings backup on ViX 5.4.004

  1. #1
    Willo3092's Avatar
    Title
    ViX Beta Tester
    Join Date
    Oct 2016
    Location
    East Midlands
    Posts
    1,055
    Thanks
    747
    Thanked 400 Times in 301 Posts

    Unable to restore settings backup on ViX 5.4.004

    SF8008 is hanging after restoring settings on ViX 5.4.004 using the restore wizard on first boot.
    I've tried several different settings backups and all the same.
    The settings and plugins seem to restore okay but upon rebooting the box bootloops and then hangs with 00 on the display.
    The same settings backups restore fine on ViX 5.4.003.

  2. #2
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by Willo3092 View Post
    SF8008 is hanging after restoring settings on ViX 5.4.004 using the restore wizard on first boot.
    I've tried several different settings backups and all the same.
    The settings and plugins seem to restore okay but upon rebooting the box bootloops and then hangs with 00 on the display.
    The same settings backups restore fine on ViX 5.4.003.
    Use putty to telnet into the box
    then enter enigma2 and see what is displayed

    I have been able to flash & restore
    Last edited by twol; 14-01-21 at 13:49.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  3. The Following User Says Thank You to twol For This Useful Post:

    Willo3092 (14-01-21)

  4. #3
    Willo3092's Avatar
    Title
    ViX Beta Tester
    Join Date
    Oct 2016
    Location
    East Midlands
    Posts
    1,055
    Thanks
    747
    Thanked 400 Times in 301 Posts
    Will do, I'll reflash 5.4.004 and try again. Back on 5.4.003 at the moment.

  5. #4
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,276 Times in 1,089 Posts
    Restored 5.4.003 settings ok after flashing 5.4.004 yesterday on ultimo4k - everything else working as expected as well.

  6. #5
    Willo3092's Avatar
    Title
    ViX Beta Tester
    Join Date
    Oct 2016
    Location
    East Midlands
    Posts
    1,055
    Thanks
    747
    Thanked 400 Times in 301 Posts
    Welcome to OpenViX for sf8008
    openvix 5.4 sf8008

    sf8008 login: root
    Password:
    Last login: Thu Jan 14 14:45:26 GMT 2021 on pts/0
    root@sf8008:~# enigma2
    [Enigma2] PYTHONPATH: /usr/lib/enigma2/python
    [Enigma2] DVB_API_VERSION 5 DVB_API_VERSION_MINOR 11
    ENIGMA_DEBUG_LVL=4
    < 231.4867> 14:47:47.1841 [Avahi] avahi_timeout_new
    < 231.4870> 14:47:47.1843 [Avahi] avahi_watch_new(3 0x1)
    < 231.4871> 14:47:47.1844 [Avahi] avahi_timeout_update
    < 231.4872> 14:47:47.1846 [Avahi] avahi_timeout_new
    < 231.4875> 14:47:47.1848 [Avahi] avahi_timeout_free
    < 231.4876> 14:47:47.1850 [Avahi] avahi_timeout_new
    < 231.4878> 14:47:47.1851 [Avahi] avahi_timeout_free
    < 231.4879> 14:47:47.1852 [Avahi] avahi_timeout_new
    < 231.4881> 14:47:47.1854 [Avahi] avahi_timeout_free
    < 231.4882> 14:47:47.1855 [Avahi] avahi_timeout_new
    < 231.4885> 14:47:47.1858 [Avahi] avahi_timeout_free
    < 231.4885> 14:47:47.1859 [Avahi] avahi_timeout_new
    < 231.4888> 14:47:47.1862 [Avahi] avahi_timeout_free
    < 231.4889> 14:47:47.1862 [Avahi] avahi_timeout_new
    < 231.4892> 14:47:47.1866 [Avahi] avahi_timeout_free
    < 231.4893> 14:47:47.1866 [Avahi] client state: 2
    < 231.4895> 14:47:47.1868 [Avahi] avahi_timeout_new
    < 231.4920> 14:47:47.1893 [Avahi] avahi_timeout_free
    < 231.4923> 14:47:47.1896 [eInit] + (1) Background File Eraser
    < 231.4923> 14:47:47.1897 [eInit] + (5) Tuxtxt
    < 231.4924> 14:47:47.1897 [eInit] + (8) graphics acceleration manager
    < 231.5740> 14:47:47.2714 [eInit] + (9) Font Render Class
    < 231.5741> 14:47:47.2714 [Font] Initializing lib...
    < 231.5743> 14:47:47.2716 [Font] Loading fonts...
    < 231.5743> 14:47:47.2716 [Font] Intializing font cache, using max. 4MB...
    < 231.5744> 14:47:47.2717 [eInit] + (9) gLCD
    < 231.5744> 14:47:47.2717 [eFbLCD] FBIOGET_VSCREENINFO: Inappropriate ioctl for device
    < 231.5745> 14:47:47.2718 [eFbLCD] framebuffer /dev/null not available
    < 231.5745> 14:47:47.2719 [eDboxLCD] xres=132, yres=64, bpp=8 lcd_type=1
    < 231.5746> 14:47:47.2719 [eLCD] (132x64x8) buffer 0x19b7ee8 8448 bytes, stride 132
    < 231.5746> 14:47:47.2719 [eLCD] (132x64x8) buffer 0x1a20598 8448 bytes, stride 132
    < 231.5746> 14:47:47.2720 [gLCDDC] resolution: 132x64x8 stride=132
    < 231.5747> 14:47:47.2720 [eInit] + (9) GFBDC
    < 231.5747> 14:47:47.2720 [fb] /dev/fb0: 49152k video mem
    < 231.5798> 14:47:47.2771 [fb] double buffering available!
    < 231.5880> 14:47:47.2853 [gFBDC] resolution: 1920x1080x32 stride=7680, 32952kB available for acceleration surfaces.
    < 231.5880> 14:47:47.2854 [eInit] + (10) gRC
    < 231.5882> 14:47:47.2856 [gRC] thread created successfully
    < 231.5883> 14:47:47.2856 [eInit] + (15) eWindowStyleManager
    < 231.5883> 14:47:47.2856 [eInit] + (20) AVSwitch Driver
    < 231.5883> 14:47:47.2857 [eAVSwitch] failed to open /dev/dbox/fp0 to monitor vcr scart slow blanking changed: No such file or directory
    < 231.5884> 14:47:47.2857 [eInit] + (20) misc options
    < 231.5884> 14:47:47.2857 [eInit] + (20) RC Input layer
    < 231.5884> 14:47:47.2857 [eInit] + (20) UHF Modulator
    < 231.5884> 14:47:47.2858 [eRFmod] couldnt open /dev/rfmod0: No such file or directory
    < 231.5885> 14:47:47.2858 [eInit] + (20) DVB-CI UI
    < 231.5885> 14:47:47.2858 [eInit] + (21) input device driver
    < 231.5886> 14:47:47.2859 [eRCInputEventDriver] devicename=dreambox advanced remote control
    < 231.5886> 14:47:47.2860 [eRCInputEventDriver] devicename=dreambox advanced remote control
    < 231.5887> 14:47:47.2860 [eRCDeviceInputDev] device "dreambox advanced remote control" is a remotecontrol
    < 231.5887> 14:47:47.2861 [eRCInputEventDriver] devicename=Hisi Front Panel Button Controls
    < 231.5888> 14:47:47.2861 [eRCInputEventDriver] devicename=Hisi Front Panel Button Controls
    < 231.5888> 14:47:47.2861 [eRCDeviceInputDev] device "Hisi Front Panel Button Controls" is a remotecontrol
    < 231.5888> 14:47:47.2861 [eInputDeviceInit] Found 2 input devices.
    < 231.5888> 14:47:47.2862 [eInit] + (22) Hdmi CEC driver
    < 231.5889> 14:47:47.2862 [eInit] + (30) eActionMap
    < 231.5889> 14:47:47.2863 [eInit] + (35) CA handler
    < 231.5891> 14:47:47.2864 [eInit] + (35) CI Slots
    < 231.5892> 14:47:47.2865 [CI] scanning for common interfaces..
    < 231.5894> 14:47:47.2867 [CI] done, found 0 common interface slots
    < 231.5895> 14:47:47.2868 [eInit] + (40) eServiceCenter
    < 231.5895> 14:47:47.2868 [eServiceCenter] settings instance.
    < 231.5895> 14:47:47.2869 [eInit] + (41) Stream server
    < 231.5899> 14:47:47.2872 [Avahi] AvahiServiceEntry (null) (_e2stream._tcp) 8001
    < 231.5900> 14:47:47.2873 [Avahi] avahi_timeout_new
    < 231.5905> 14:47:47.2878 [Avahi] avahi_timeout_free
    < 231.5906> 14:47:47.2879 [Avahi] avahi_timeout_new
    < 231.5909> 14:47:47.2882 [Avahi] avahi_timeout_free
    < 231.5910> 14:47:47.2883 [Avahi] avahi_timeout_new
    < 231.5913> 14:47:47.2886 [Avahi] avahi_timeout_free
    < 231.5913> 14:47:47.2886 [Avahi] Will Register sf8008 (_e2stream._tcp) on sf8008:8001
    < 231.5916> 14:47:47.2890 [Avahi] avahi_timeout_new
    < 231.5928> 14:47:47.2902 [Avahi] avahi_timeout_free
    < 231.5930> 14:47:47.2903 [Avahi] avahi_timeout_new
    < 231.5934> 14:47:47.2908 [Avahi] avahi_timeout_free
    < 231.5935> 14:47:47.2908 [Avahi] Registered sf8008 (_e2stream._tcp) on sf8008:8001
    < 231.5935> 14:47:47.2908 [eInit] + (41) Encoders
    < 231.5938> 14:47:47.2911 [eInit] + (41) eServiceFactoryDVB
    < 231.5938> 14:47:47.2912 [eInit] + (41) eServiceFactoryFS
    < 231.5939> 14:47:47.2912 [eInit] + (41) eServiceFactoryMP3
    < 231.5940> 14:47:47.2913 [eInit] + (41) eServiceFactoryM2TS
    < 231.5940> 14:47:47.2913 [eInit] + (41) eServiceFactoryHDMI
    < 231.5940> 14:47:47.2914 [eInit] + (41) eServiceFactoryTS
    < 231.5941> 14:47:47.2914 [eInit] + (41) eServiceFactoryWebTS
    < 231.5941> 14:47:47.2914 [eInit] + (41) eServiceFactoryDVD
    < 231.5941> 14:47:47.2914 [eInit] reached rl 70
    < 231.5942> 14:47:47.2915 [eDVBDB] ---- opening lame channel db
    < 231.5943> 14:47:47.2916 [eDVBDB] reading services (version 4)
    < 231.6129> 14:47:47.3103 [eDVBDB] loaded 119 channels/transponders and 1669 services
    < 231.6131> 14:47:47.3104 [eDVBResourceManager] scanning for frontends..
    < 231.6132> 14:47:47.3105 [eDVBFrontend0] opening frontend
    < 231.6133> 14:47:47.3106 [eDVBFrontend0] opening frontend
    < 231.6174> 14:47:47.3147 [eDVBFrontend0] frontend 0 has DVB API 50a
    < 231.6334> 14:47:47.3307 [eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
    < 231.6365> 14:47:47.3338 [eDVBFrontend0] close frontend
    < 231.6524> 14:47:47.3497 [eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
    < 231.6556> 14:47:47.3529 [eDVBFrontend1] opening frontend
    < 231.6556> 14:47:47.3529 [eDVBFrontend1] opening frontend
    < 231.7631> 14:47:47.4604 [eDVBFrontend1] frontend 1 has DVB API 50a
    < 231.7632> 14:47:47.4605 [eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
    < 231.7632> 14:47:47.4605 [eDVBFrontend1] close frontend
    < 231.7632> 14:47:47.4605 [eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
    < 231.7634> 14:47:47.4607 [eDVBDemux] using 16 for PVR DMX_SET_SOURCE
    < 231.7634> 14:47:47.4608 [eDVBDemux] using 16 for PVR DMX_SET_SOURCE
    < 231.7635> 14:47:47.4608 [eDVBDemux] using 16 for PVR DMX_SET_SOURCE
    < 231.7636> 14:47:47.4609 [eDVBDemux] using 16 for PVR DMX_SET_SOURCE
    < 231.7636> 14:47:47.4609 [eDVBDemux] using 16 for PVR DMX_SET_SOURCE
    < 231.7636> 14:47:47.4610 [eDVBAdapterLinux] get demux 0
    < 231.7637> 14:47:47.4610 [eDVBAdapterLinux] get demux 1
    < 231.7637> 14:47:47.4610 [eDVBAdapterLinux] get demux 2
    < 231.7637> 14:47:47.4610 [eDVBAdapterLinux] get demux 3
    < 231.7637> 14:47:47.4610 [eDVBAdapterLinux] get demux 4
    < 231.7638> 14:47:47.4611 [eDVBResourceManager] found 1 adapter, 2 frontends(2 sim) and 5 demux
    < 231.7641> 14:47:47.4614 [eDVBLocalTimeHandler] Use valid Linux Time (RTC?)
    < 231.7642> 14:47:47.4615 [eEPGCache] Initialized EPGCache (wait for setCacheFile call now)
    < 231.7647> 14:47:47.4621 [MAIN] Loading spinners...
    < 231.7715> 14:47:47.4688 [MAIN] found 16 spinner!
    [MAIN] executing main
    < 231.7717> 14:47:47.4690 [setIoPrio] best-effort level 3 ok
    < 231.9967> 14:47:47.6941 [Image Type] release
    < 231.9968> 14:47:47.6942 [Image Version] 5.4
    < 231.9969> 14:47:47.6942 [Image Build] 004
    < 232.2036> 14:47:47.9009 [eDVBFrontend] Failed to open /dev/dbox/fp0
    < 232.2037> 14:47:47.9010 [Misc_Options] 12V output detected
    < 232.2059> 14:47:47.9033 [Console] command: mount /dev/block/by-name/bootoptions /tmp/MultibootBknemj
    < 232.2061> 14:47:47.9034 [eConsoleAppContainer] Starting /bin/sh
    < 232.2065> 14:47:47.9039 [Console] pid = 2962
    < 232.2205> 14:47:47.9179 [Console] command: umount /tmp/MultibootBknemj
    < 232.2206> 14:47:47.9180 [eConsoleAppContainer] Starting /bin/sh
    < 232.2211> 14:47:47.9184 [Console] pid = 2966
    < 232.2432> 14:47:47.9405 [Harddisk] Enumerating block devices...
    < 232.2569> 14:47:47.9543 [Harddisk] len partitions = 1, device = sdd
    < 232.2571> 14:47:47.9544 [Harddisk] Found storage device 'sdd' (Removable=True) NoPartitions = 1.
    < 232.2583> 14:47:47.9556 [Harddisk] Device 'sdd' (External (usb) - SanDisk (Cruzer Fit)) -> '/dev/sdd' -> '/dev/sdd'.
    < 232.2585> 14:47:47.9558 [Harddisk] Found partition 'sdd1', description='Cruzer Fit (Partition 1)', device='/sys/devices/platform/soc/f9890000.ehci/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/host0/target0:0:0/0:0:0:0'.
    < 232.2588> 14:47:47.9562 [Harddisk] Enumerating block devices complete.
    < 232.2589> 14:47:47.9562 [Harddisk] Enumerating network mounts...
    < 232.2611> 14:47:47.9584 [Harddisk] Enumerating network mounts complete.
    < 232.2687> 14:47:47.9660 [Config] Config file loaded ok...
    < 232.3358> 14:47:48.0332 [PiconLocator] adding path: /media/hdd/picon/
    < 232.3464> 14:47:48.0437 ('BoxBranding', 'MachineBuild', 'sf8008')
    < 232.3467> 14:47:48.0440 ('BoxBranding', 'BoxType', 'sf8008')
    < 232.3467> 14:47:48.0440 ('BoxBranding', 'BrandOEM', 'octagon')
    < 232.3468> 14:47:48.0441 ('BoxBranding', 'DisplayType', '7segment')
    < 232.3468> 14:47:48.0442 ('AVSwitch', 'hasRCA', False)
    < 232.3469> 14:47:48.0442 ('AVSwitch', 'hasSCART', False)
    < 232.3470> 14:47:48.0443 ('AVSwitch', 'hasJACK', True)
    < 232.3470> 14:47:48.0444 ('AVSwitch', 'hasYUV', False)
    < 232.3471> 14:47:48.0444 ('AVSwitch', 'HasScartYUV', False)
    < 232.3472> 14:47:48.0446 [AVSwitch] Modes-B are {'Jack': ['PAL', 'NTSC', 'Multi'], 'HDMI': ['720p', '1080p', '2160p', '1080i', '576p', '576i', '480p', '480i']}
    < 232.4097> 14:47:48.1070 [NimManager] Reading satellites.xml
    < 232.5146> 14:47:48.2119 [NimManager] Reading cables.xml
    < 232.6644> 14:47:48.3617 [NimManager] Reading terrestrial.xml
    < 232.8297> 14:47:48.5271 [InitNimManager] disable combined tuner
    < 232.8303> 14:47:48.5276 [SecConfigure] sec config cleared
    < 232.8306> 14:47:48.5279 [eDVBFrontend] setSlotInfo for dvb frontend 0 to slotid 0, descr Si2166D, need rotorworkaround No, enabled Yes, DVB-S2 Yes
    < 232.8307> 14:47:48.5280 [eDVBFrontend] setSlotInfo for dvb frontend 1 to slotid 1, descr ATBM7821 DVB-T2/C, need rotorworkaround No, enabled No, DVB-S2 No
    < 232.8310> 14:47:48.5283 [SecConfigure] slot: 0 configmode: simple
    < 232.8311> 14:47:48.5284 [SecConfigure] diseqcmode: single
    < 232.8315> 14:47:48.5288 [SecConfigure] sec config completed
    < 232.8884> 14:47:48.5857 Traceback (most recent call last):
    < 232.8885> 14:47:48.5858 File "/usr/lib/enigma2/python/mytest.py", line 40, in <module>
    < 232.8886> 14:47:48.5859 from Screens import InfoBar
    < 232.8886> 14:47:48.5859 File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 17, in <module>
    < 232.8887> 14:47:48.5860 File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 25, in <module>
    < 232.8888> 14:47:48.5861 File "/usr/lib/enigma2/python/Screens/ChannelSelection.py", line 19, in <module>
    < 232.8889> 14:47:48.5862 File "/usr/lib/enigma2/python/Screens/EpgSelectionSingle.py", line 5, in <module>
    < 232.8890> 14:47:48.5863 File "/usr/lib/enigma2/python/Screens/EpgSelectionBase.py", line 22, in <module>
    < 232.8891> 14:47:48.5864 from Screens.TimerEntry import InstantRecordTimerEntry, TimerEntry
    < 232.8891> 14:47:48.5865 ImportError: cannot import name InstantRecordTimerEntry
    < 232.8933> 14:47:48.5906 [eDVBDB] ---- saving lame channel db
    < 232.9101> 14:47:48.6075 [eDVBDB] saved 119 channels and 1669 services!
    < 232.9223> 14:47:48.6197 [eDVBResourceManager] release cached channel (timer timeout)
    < 232.9225> 14:47:48.6199 [Avahi] avahi_timeout_new
    < 232.9231> 14:47:48.6204 [Avahi] avahi_timeout_free
    < 232.9232> 14:47:48.6205 [Avahi] avahi_watch_free
    < 232.9233> 14:47:48.6207 [Avahi] avahi_timeout_free
    < 232.9237> 14:47:48.6210 [eDVBLocalTimeHandler] set RTC to previous valid time
    < 232.9238> 14:47:48.0000 [eInit] - (41) Stream server
    < 232.9239> 14:47:48.0001 [eInit] - (41) Encoders
    < 232.9239> 14:47:48.0001 [eInit] - (41) eServiceFactoryDVB
    < 232.9239> 14:47:48.0001 [eInit] - (41) eServiceFactoryFS
    < 232.9240> 14:47:48.0002 [eInit] - (41) eServiceFactoryMP3
    < 232.9240> 14:47:48.0002 [eInit] - (41) eServiceFactoryM2TS
    < 232.9240> 14:47:48.0002 [eInit] - (41) eServiceFactoryHDMI
    < 232.9240> 14:47:48.0002 [eInit] - (41) eServiceFactoryTS
    < 232.9241> 14:47:48.0002 [eInit] - (41) eServiceFactoryWebTS
    < 232.9241> 14:47:48.0003 [eInit] - (41) eServiceFactoryDVD
    < 232.9241> 14:47:48.0003 [eInit] - (40) eServiceCenter
    < 232.9241> 14:47:48.0003 [eInit] - (35) CA handler
    < 232.9242> 14:47:48.0004 [eInit] - (35) CI Slots
    < 232.9242> 14:47:48.0004 [eInit] - (30) eActionMap
    < 232.9242> 14:47:48.0004 [eInit] - (22) Hdmi CEC driver
    < 232.9243> 14:47:48.0004 [eInit] - (21) input device driver
    < 232.9840> 14:47:48.0602 [eInit] - (20) AVSwitch Driver
    < 232.9841> 14:47:48.0603 [eInit] - (20) misc options
    < 232.9841> 14:47:48.0603 [eInit] - (20) RC Input layer
    < 232.9841> 14:47:48.0603 [eInit] - (20) UHF Modulator
    < 232.9841> 14:47:48.0603 [eInit] - (20) DVB-CI UI
    < 232.9842> 14:47:48.0604 [eInit] - (15) eWindowStyleManager
    < 232.9842> 14:47:48.0604 [eInit] - (10) gRC
    < 232.9843> 14:47:48.0604 [gRC] waiting for gRC thread shutdown
    < 232.9846> 14:47:48.0607 [gRC] thread has finished
    < 232.9846> 14:47:48.0608 [eInit] - (9) Font Render Class
    < 232.9846> 14:47:48.0608 [eInit] - (9) gLCD
    < 232.9847> 14:47:48.0608 [eInit] - (9) GFBDC
    < 232.9859> 14:47:48.0621 [eInit] - (8) graphics acceleration manager
    < 233.0034> 14:47:48.0796 [eInit] - (5) Tuxtxt
    < 233.0034> 14:47:48.0796 [eInit] - (1) Background File Eraser
    < 233.0035> 14:47:48.0797 [eInit] reached rl -1
    root@sf8008:~#


    It's 100 on the display, not 00

  7. #6
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,276 Times in 1,089 Posts
    Maybe this is significant.....?

    Code:
    < 232.8891> 14:47:48.5864 from Screens.TimerEntry import InstantRecordTimerEntry, TimerEntry
    < 232.8891> 14:47:48.5865 ImportError: cannot import name InstantRecordTimerEntry

  8. #7
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,276 Times in 1,089 Posts
    This commit may have removed references to InstantRecordTimerEntry

    Code:
    https://github.com/OpenViX/enigma2/commit/ad912db88ae6e5fb70c7ce44f73a7cfa0a7e19d5#diff-023bc4e4b5c3d3b1299824cde269f16b1fdf1834f006776bd9b76678f23114c5

  9. The Following User Says Thank You to ccs For This Useful Post:

    Willo3092 (14-01-21)

  10. #8
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    File "/usr/lib/enigma2/python/Screens/EpgSelectionBase.py", line 22, in <module>

    You are running with the module from the previous release! Not sure from the Enigma logs how this can be.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  11. #9
    Willo3092's Avatar
    Title
    ViX Beta Tester
    Join Date
    Oct 2016
    Location
    East Midlands
    Posts
    1,055
    Thanks
    747
    Thanked 400 Times in 301 Posts
    Quote Originally Posted by ccs View Post
    This commit may have removed references to InstantRecordTimerEntry

    Code:
    https://github.com/OpenViX/enigma2/commit/ad912db88ae6e5fb70c7ce44f73a7cfa0a7e19d5#diff-023bc4e4b5c3d3b1299824cde269f16b1fdf1834f006776bd9b76678f23114c5
    Good spot! I had a modified RecordTimer.py included in my settings backups. All good now thank you

    ..... and a modified EpgSelectionBase.py Thanks guys

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.