Box crashing and Trying to Email Log File or Use Network

[CRMS]

My box is still crashing every now and again and I have a number of crash logs. I am trying to email the logs from the System>Logs, but get

Error:
[Errno 111] Connection refused.

When I try to email a log. After first attempt, box tells me I have already sent log.
I have my email, user name and send yourself a copy set in Logs settings

Wifi adapter plugged in, connected to network. WLAN connection with Green tick. Password set.
HDD seems to be mounted in Mount Manager with IP 192.168.0.0 Dir media/hdd/ - another Green tick

Both PC and box on same wifi network but can't see box in PC network, only the Broadcom wifi adapter on 192.168.0.10

Openwebif on 192.168.1.65 doesn't open either - just get site can't be reached.

Worked OK before in UK on wifi or LAN. But don't think being in CH has anything to do with it.

[cactikid]

Might be better to upload your logs onto a post and let the brains check them out.

[Andy_Hazza]

Uploading logs are better than emailing them.


Sent from my iPhone using Tapatalk

[CRMS]

I have opened a crash log, but where should I be looking??

[CRMS]

I can't get at the crash logs because the box won't connect to network.
And when I go to home/root/logs on box, there are no files visible.

[cactikid]

Have you run a network test and all is green.
I presume you have setup box for logs.

[CRMS]

Network test all green. Box set up for logs at System>Logs>Logs settings. I have my email, user name and send yourself a copy set in Logs settings.

So got Webif to work using IP 192.168.0.21 as listed in Adapter Settings.

Can I find logs in WebIf?? Only seem to have Logs settings??

[ccs]

Can I find logs in WebIf??

No, you need to transfer them to your pc using ftp or filezilla, for example.

[abu baniaz]

It looks like there is an issue with the e-mail address.

What location have you set for the log location?
Are you able to install plugins?

[CRMS]

OK. I have filezilla. Looked for an ftp guide but didn't find anything. How do I set up please?? I have my own website set up but don't know what GB names/passwords/ports etc to use??
Previously, the GB was listed in W10 File Explorer under Networks. And easy to navigate through folders.

[CRMS]

Webif page

GBLogs.jpg

[abu baniaz]

host: IP address or hostname of box. Check network settings of box
username = root
password = Whatever you set. 5.4 images wont allow access unless you set a password.
port = leave blank. it will usually default to 21

https://www.world-of-satellite.com/s...l=1#post415499

[CRMS]

In Filezilla I've used gbquad4k as host name and the password as password. User name ??

Status: Resolving address of gbquad4k
Status: Connecting to [fe80::20b:81ff:fea0:d5a0%11]:21...
Status: Connection established, waiting for welcome message...
Status: Insecure server, it does not support FTP over TLS.
Command: USER anonymous
Response: 331 Please specify the password.
Command: PASS *********************
Response: 530 Login incorrect.
Error: Critical error: Could not connect to server

[ccs]

Username: root
Password: what you set it to

(as in post #12)

[CRMS]

Thanks. I had read that link is the past. So log from this morning's crash:

Enigma2_crash_2021-01-02_09-39-14.log

And that only took 4-5 hours. Good job I am in quarantine in Switzerland with nothing better to do!! - Like get up the mountain and ski.