ABM Saorview Frequencies

[Kaysat]

Hello,

I have recently installed a Zgemma H9 combi with Openvix. My local transmitter is listed in ABM. There are 2 muxes. Ch 31 & 37. When I perform a scan, I only pick up the channels in one mux. I know I have signal for both muxes. I tried adding the muxes under signal finder, but this only works for one mux also. I can see both muxes in signal finder, I can scan both, but only get channels for one mux. I know this box works fine for a different Saorview transmitter with two muxes. Is it possible that the information in ABM is not correct for the mux in question. Kilduff, tipperary, Ireland, ch31 & ch37. Any help would be much appreciated.

[ccs]

Looks like there may be a typo in terrestrial_ie_saorview_PSB1.xml

<customtransponder key="tipperary_kilduff" transport_stream_id="03e9" frequency="544000000" />

Should be 554000000 ??

[Joe_90]

Ok - I'll fix it. I supplied the xml files to abu when the frequencies changed in September last year.

[Joe_90]

Here is the amended.xml file. It goes in /usr/lib/enigma2/python/SystemPlugins?AutoBouquetsMaker/providers/


EDIT - Apologies Kaysat!

[Kaysat]

Oh great, thank you.

[abu baniaz]

The changes have been made on Github. You can update the file using the function in ABM.

[Kaysat]

Thanks again.