Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 4 of 4

Thread: Vu+ Ultimo 4K - will it do what I want?

  1. #1

    Title
    Junior Member
    Join Date
    Nov 2011
    Posts
    27
    Thanks
    21
    Thanked 3 Times in 2 Posts

    Vu+ Ultimo 4K - will it do what I want?

    I wish to reduce the clutter under the TV by replacing three of my boxes with just one. Before spending around 500 GBP on a new box, I need to know if it will pass muster.

    The three boxes are Technomate TM-7102, Technisat Digit ISIO S and Technisat Digit ISIO STC. The Technomate is quite long in the tooth with its phant0mpatch firmware, but it is a very flexible FTA receiver. The ISIO S's two CI+ slots is home to Fransat and Tivusat and CAM and card combos and the ISIO STC's card slot is home to a HD+ card.

    The Vu+ Ultimo 4K has two CI slots and two card slots. Can these be configured for the two CAM and card combos and HD+ card with one of the firmwares available from your sponsor?

  2. #2
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,649
    Thanks
    23,584
    Thanked 26,054 Times in 7,638 Posts
    The Tivusat card can be setup read using the receivers Card reader and OScam softcam. The CI+ cams maybe possible with OpenATV or VTi image, not 100% sure.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  3. The Following User Says Thank You to Sicilian For This Useful Post:

    White Monk (05-10-20)

  4. #3

    Title
    Junior Member
    Join Date
    Nov 2011
    Posts
    27
    Thanks
    21
    Thanked 3 Times in 2 Posts
    Quote Originally Posted by Sicilian View Post
    The Tivusat card can be setup read using the receivers Card reader and OScam softcam. The CI+ cams maybe possible with OpenATV or VTi image, not 100% sure.
    One down, two to go!

  5. #4

    Title
    Junior Member
    Join Date
    Nov 2011
    Posts
    27
    Thanks
    21
    Thanked 3 Times in 2 Posts
    Bit the bullet and bought the box (with the default image) from our sponsor, delivered safely by DPD. Now on steep learning curve. Transferred cables from my TM-7102 directly to the new box and used Freeview to find my way around the box. NDFEdit 1.6.9 was my main tool for the TM-7102 - now DreamboxEdit 7.2.1.0 looks like its replacement for the Ultimo4K. WebIF much simpler than using STBDaemon too. Reflashed the box first with OpenVix and ran ABM. Then reflashed with VTi as per #Siclian's suggestion and managed somehow to get to recognise my HD+ card intermittently (Insight HD viewed) but no other card I have. Back to OpenVix and checked out OScam - then realised Oscam needed configuration, which is beyond me at the moment. Scanned this forum and found one forum member had recently got Tivusat working with the help of another member. Followed his procedure, which together with ABM and my Tivusat card, gave me access to Mezzo and RAI 4K - I watched part of La Cenerantola (Cinderella) in awe (saw it performed live at Sadlers Wells many years ago).

    So, the protective plastic is now removed and our lounge is now tidied up and I've got something to keep me well occupied during my self-isolation, until some saint creates the vaccine.
    Last edited by White Monk; 14-10-20 at 08:30.

  6. The Following 2 Users Say Thank You to White Monk For This Useful Post:

    abu baniaz (14-10-20),Sicilian (15-10-20)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.