/etc/tuxbox/config/ not /etc/tuxbox
So it will be like this, /etc/tuxbox/config/oscam.server
Prego
Sent from my GM1913 using Tapatalk
/etc/tuxbox/config/ not /etc/tuxbox
So it will be like this, /etc/tuxbox/config/oscam.server
Prego
Sent from my GM1913 using Tapatalk
ziggysdomain (24-09-20)
Great, thanks. I'll get cracking and report back. May be a day or two. Life sometimes gets in the way of my technology hobbies ... unfortunately :-)
Vu+ Ultimo 4K
BobbyC (24-09-20)
Ok. Here's where I am:
Installed image 'openvix-5.3.039.release-vuultimo4k', followed the setup wizard and have Astra and Hotbird (and Saorview) channels operational.
Installed 'oscam-emu' as part of the initial setup (install plugins option was offered to me).
Copied over your 'oscam.server' file via ftp to /etc/tuxbox/config/ checked via ssh also that the file was there and it is.
Inserted card in slot chip-side down, cofigured the plugin in 'Softcams' section and rebooted the box.
None of the HD or Mediaset channels are available (SD RAI channels yes) and after about 30 seconds or so this appears on my screen:
softcam_error.jpg
and this:
No_config.jpg
Any ideas?
Vu+ Ultimo 4K
softcam_error.jpg
Apologies. First upload of that pic was sideways.
Last edited by ziggysdomain; 25-09-20 at 15:28. Reason: Still sideways!!!
Vu+ Ultimo 4K
What about the other oscam files? .conf .dvapi . reader?
Last edited by abu baniaz; 25-09-20 at 15:36.
BobbyC (25-09-20)
It cannot find an oscam.conf file which should be in the config directory - having said that it shouldn‘t crash - there is a bug in the code
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
here the entire contents of my config folder
add them to yours
I think when I set it up I only needed the .conf .server files, took me ages to find something that worked off the internet ! I had been using ccam 2.3 ipk previously
Last edited by abu baniaz; 14-01-21 at 23:40. Reason: remove dead link
White Monk (14-10-20)
Thanks BobbyC. Nothing still. Have kept it on RAI1 for a while in case the card needed time, but no joy.
Of those 5 files I didn't use the oscam.server file as I assume it's the same on you sent me the other day? Also, abu, there's no dvapi / reader. Are they two separate files and should they be there too?
Here's a screenshot of the logfile from within the softcams settings screen if that helps (help me ):
Log file.jpg
Vu+ Ultimo 4K
Wait! Hold the front page. I put the card in the second slot and all is working - including record and watch. Jeez, thank you so much guys, and of course a special thanks to BobbyC for the files. That is just brilliant to get something working when you've been trying for ages to do so and it has continually failed. Especially too the record and watch. Not being able to do that was a bit of a disappointment, to say the least, having gone to the bother and cost of installing unicable LNBs (and new dishes to boot .. which needed to be done anyway).
And I have just checked the Astra record and watch and that too is functioning. Now for some modding (skins, plugins, etc). Are we ever happy?
Grazie all!
Vu+ Ultimo 4K
BobbyC (25-09-20)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
ziggysdomain (25-09-20)
È bello sentire che il tuo problema è stato risolto.
ziggysdomain (25-09-20)
Vu+ Ultimo 4K
ziggysdomain (26-09-20)
Thanks BobbyC. I most certainly will.
Vu+ Ultimo 4K
BobbyC (26-09-20)