Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: Zgemma H7S bricked?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Title
    Junior Member
    Join Date
    Jul 2020
    Posts
    11
    Thanks
    1
    Thanked 2 Times in 2 Posts

    Question Zgemma H7S bricked?

    Good morning all. I have reflashed my H7S box doing the couch upgrade. It worked fine flashing openvix-5.3.039.release-zgemmah7. The box completed the flash and auto rebooted. But - the box now stops during boot showing "49" on the front panel. It is entirely unresponsive and all i can do is restart it on the rear button. Flashing from USB does not work. The perocedure to power down, put the USB stick in, power on pressing the front under flap button doesn't work. The box simply reboots and stops showing 49 on the front panel. I fear I now have a bricked H7S. What can I do now please?

    Thanks.

  2. #2
    Willo3092's Avatar
    Title
    ViX Beta Tester
    Join Date
    Oct 2016
    Location
    East Midlands
    Posts
    1,055
    Thanks
    747
    Thanked 400 Times in 301 Posts
    You can flash using putty from your PC using Grog's script:

    wget --no-check-certificate -O install_vix.sh https://www.dropbox.com/s/hc2cdr116l...ll_vix.sh?dl=1 && bash install_vix.sh

    If using USB make sure you use the recovery version of the zip file: https://www.openvix.co.uk/openvix-bu...overy_emmc.zip

  3. #3

    Title
    Junior Member
    Join Date
    Jul 2020
    Posts
    11
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by Willo3092 View Post
    You can flash using putty from your PC using Grog's script:

    wget --no-check-certificate -O install_vix.sh https://www.dropbox.com/s/hc2cdr116l...ll_vix.sh?dl=1 && bash install_vix.sh

    If using USB make sure you use the recovery version of the zip file: https://www.openvix.co.uk/openvix-bu...overy_emmc.zip
    Thanks for the very rapid response. Much appreciated. That "whooshing sound" is your advice flying way over my head. Your input is highly appreciated but way too techy for me to cope with. If there's a Janet and John walk through on how to do this, I'd really appreciate a pointer to it.

    Cheers.
    Last edited by Fuzzy61; 31-08-20 at 10:38.

  4. #4
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    I am sure its not bricked! ... but it (for some reason) is probably crashing whilst booting up.
    did you restore settings after flashing or did you not get that far??

    So assuming you have putty installed (? - if not install)
    start a telnet session using putty - on the config panel enter your boxes IP address, click on telnet and port 23 ... hit open.
    then login using root and no password.
    type enigma2 and look for failures (usually you will see everything flash past and then if you page up you will see a failure

    post what you see!
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  5. #5

    Title
    Junior Member
    Join Date
    Jul 2020
    Posts
    11
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by twol View Post
    I am sure its not bricked! ... but it (for some reason) is probably crashing whilst booting up.
    did you restore settings after flashing or did you not get that far??

    So assuming you have putty installed (? - if not install)
    start a telnet session using putty - on the config panel enter your boxes IP address, click on telnet and port 23 ... hit open.
    then login using root and no password.
    type enigma2 and look for failures (usually you will see everything flash past and then if you page up you will see a failure

    post what you see!
    Thanks. For the encouragment. The couch flashing session completed on the two progress bars visible on the TV screen. It (the box) then auto rebooted but froze showing "49". That's all I have managed to get the box to do since the flash. I had no idea "putty" is software. I am on a vertical learning curve here. I will try my best to do as you suggest then post back soon. Thank you so much for the support.

  6. #6

    Title
    Junior Member
    Join Date
    Jul 2020
    Posts
    11
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by Fuzzy61 View Post
    Thanks. For the encouragment. The couch flashing session completed on the two progress bars visible on the TV screen. It (the box) then auto rebooted but froze showing "49". That's all I have managed to get the box to do since the flash. I had no idea "putty" is software. I am on a vertical learning curve here. I will try my best to do as you suggest then post back soon. Thank you so much for the support.
    Thank you, I sucessfully putty'd into the box. For enigma2, I copied and pasted the entire text to a document and did CTRL F. The word failure is not found in the document.

    Cheers.

  7. #7
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by Fuzzy61 View Post
    Thank you, I sucessfully putty'd into the box. For enigma2, I copied and pasted the entire text to a document and did CTRL F. The word failure is not found in the document.

    Cheers.
    Post the doc here - I was being too generic by using the word failure
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  8. #8

    Title
    Junior Member
    Join Date
    Jul 2020
    Posts
    11
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by twol View Post
    Post the doc here - I was being too generic by using the word failure
    Hopefully this DropBox link works -

    https://www.dropbox.com/s/r74iz1css3...0text.txt?dl=0

    PS - yes, works for me. Cheers.

  9. #9

    Title
    Junior Member
    Join Date
    Jul 2020
    Posts
    11
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Instances of the word "fail*" in the enigma2 file just putty'd to -

    < 1104.8442> 11:35:14.1070 [eAVSwitch] failed to open /dev/dbox/fp0 to monitor

    < 1107.2501> 11:35:16.5130 [StbHardware] Error: getFPVersion failed!

    < 1108.5368> 11:35:17.7997 [InfoBarGenerics] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'

    And that's it, folks. No more instances of "fail*" in that file. Cheers.
    Last edited by Fuzzy61; 31-08-20 at 12:14.

  10. #10
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,276 Times in 1,089 Posts
    ... you can add attachments to a post using the advanced options.

  11. The Following User Says Thank You to ccs For This Useful Post:

    Fuzzy61 (31-08-20)

  12. #11

    Title
    Junior Member
    Join Date
    Jul 2020
    Posts
    11
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by ccs View Post
    ... you can add attachments to a post using the advanced options.
    Enigma2 text.txt

    Cheers, like this?

  13. The Following User Says Thank You to Fuzzy61 For This Useful Post:

    ccs (31-08-20)

  14. #12
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Interesting its found a backup and then in a loop it would appear. (its an old backup ... vix-rel-5.2.045-20200807-1651.tar.gz)
    Where do you keep your settings backups? Internal or external HDD??
    If usb or external, detach and try reboot.
    If internal with filezilla login to the box and then find your hdd (under /media and then in teh /backup directory you should find the backups - rename or delete them) .... then reboot (init 6 in the telnet session will do that )

    If still issue, post new enigma2 log
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  15. #13
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,276 Times in 1,089 Posts
    ..... it's a backup of 5.2.045, taken a couple of weeks ago.

  16. #14

    Title
    Junior Member
    Join Date
    Jul 2020
    Posts
    11
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Thanks, back ups are kept on the box HDD. I have the directory open in Windows via network sharing. The path I have found is ZGEMMAH7 > Harddisk > backup . Does that look right? I can delete them from Windows?

    Edit - Ah, there's also root > media > hdd > backup too. Is that the one to delete files from?

    Thank you for your patience.
    Last edited by Fuzzy61; 31-08-20 at 16:22.

  17. #15
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by Fuzzy61 View Post
    Thanks, back ups are kept on the box HDD. I have the directory open in Windows via network sharing. The path I have found is ZGEMMAH7 > Harddisk > backup . Does that look right? I can delete them from Windows?

    Edit - Ah, there's also root > media > hdd > backup too. Is that the one to delete files from?

    Thank you for your patience.
    hopefully! -> root > media > hdd > backup

    I would delete all but latest and rename latest so that you can rename back % restore settings ....... if you get back up!
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.