Missing support for WiFi dongle

[stunt]

According to Debian the RT2800 driver should support that Ralink device -

https://wiki.debian.org/rt2800usb

Now, it may need some additional kernel driver. I use a no-name wireless dongle that supposedly is an RTL8812 which is in the image builds, but it needs the RTL8814 kernel driver which is not, so I end up having to manually install it each time I flash a new release.

I downloaded this stable release:
http://ftp.us.debian.org/debian/pool...0114-2_all.deb
But how did you install in on the box?
Unzip and copy all files manually to respective folders, or only few of them like the /lib/firmware/rt3070.bin?

[Joe_90]

I downloaded this stable release:
http://ftp.us.debian.org/debian/pool...0114-2_all.deb
But how did you install in on the box?
Unzip and copy all files manually to respective folders, or only few of them like the /lib/firmware/rt3070.bin?

No - don't install anything from Debian! That was just the source where I got the info on Ralink drivers! Just download the RT2800 driver from the Openvix driver repository and install it.

[spanner123]

https://www.world-of-satellite.com/s...966#post500966 Post no. 3 Don't know if there is a newer one though.

[Joe_90]

It's in the plugins list you screen grabbed earlier. Just download and install from there.

edit - my post was intended for the OP.

[stunt]

It's in the plugins list you screen grabbed earlier. Just download and install from there.

edit - my post was intended for the OP.

Before starting this thread, I allready tried to install all of those. But still not working.

[Joe_90]

Just to be clear - you installed ALL of the drivers? If you did do that, then maybe uninstall all except RT2800. Or start with a clean image and just install RT2800. Otherwise contact VU+ and ask them to supply a driver suitable for your particular model.

[stunt]

Just to be clear - you installed ALL of the drivers? If you did do that, then maybe uninstall all except RT2800. Or start with a clean image and just install RT2800. Otherwise contact VU+ and ask them to supply a driver suitable for your particular model.

I tried as you said.
Removed them all exept the RT2800
Fresh image with RT2800 as only extras via ipk-file
Then at the end also added the RT3070 as suggested earlier.

Now I will contact Vu+ or maby grab driver files from the Vu+ Zero 4k. Cause it works there.