Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 8 of 8

Thread: Tuner A Sats 28.2E and 19.2E??

  1. #1
    CRMS's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2020
    Posts
    283
    Thanks
    39
    Thanked 12 Times in 9 Posts

    Tuner A Sats 28.2E and 19.2E??

    Trying to setup Unicable and dish is pointing firmly at 28.2E.
    Confirmed by 100% signal on Humax.
    Tuner A indicates both 28.2 and 19.2 satellites with under Advanced Says: 19.2E, 28.2E.
    94% on Tuner A.
    In signal strength satellite is confirmed as 28.2.
    When scanning 28.2 is scanned first and then 19.2 and number of channels continues to increase.
    Which strikes me as a little odd???

  2. #2
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    If you performed an automatic scan, it will scan everything your box is configured for. Manual scan allows you more selection/control.

    You don't need to scan when changing LNB and satellite is still same.

  3. #3
    CRMS's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2020
    Posts
    283
    Thanks
    39
    Thanked 12 Times in 9 Posts
    Yes, but why is the box indicating 19.2?? I haven't configured it for 19.2. In Tuner set up 28.2 selected, but tuner A adds 19.2??
    Dish pointing at 28.2.

  4. #4
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts

    Tuner A Sats 28.2E and 19.2E??

    The default sat is 19.2 when you go into Advanced mode, don't ask me why. You must have configured it by accident, I have done it myself. Go into tuner configuration and select 19.2 and double check what you have.

  5. #5
    Joe_90's Avatar
    Title
    Moderator
    Join Date
    Mar 2014
    Location
    Wicklow, Ireland
    Posts
    4,100
    Thanks
    1,265
    Thanked 1,115 Times in 879 Posts
    I'm assuming you have a fixed dish - not motorised?
    If you have a tuner misconfigured for 19.2 while your dish is pointing at 28.2 and you run a manual scan you will get some results as both satellites share some same/similar transponder frequencies, but the channels displayed will be those from 28.2. They will be stored under the 19.2 listing but they will be from 28.2. That's the reason why the numbers increase. I assume you're getting about 1,000 channels on the 28.2 scan? You will get fewer on the 19.2 scan.
    GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony STR-DN 1060, Sony UHP-H1 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers

  6. #6
    CRMS's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2020
    Posts
    283
    Thanks
    39
    Thanked 12 Times in 9 Posts
    Fixed dish, auto scan. 28.2 selected in Tuner configure from all satellite options offered. But "19.2, 28.2" displayed on Tuner overview. Same for tuner B and this only shows 28.2.

  7. #7
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    Double check your configuration. Scroll to 19.2 and disable it if it is set.

  8. #8
    CRMS's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2020
    Posts
    283
    Thanks
    39
    Thanked 12 Times in 9 Posts
    Quote Originally Posted by abu baniaz View Post
    Double check your configuration. Scroll to 19.2 and disable it if it is set.
    Thanks. Yes was enabled. All fixed but strange!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.