Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.

View Entry Info: Uninstalled EPG Search, Pressing yellow button causes crash

Category:
Possible Bug
What ViX Image build number are you using?
Please provide your ViX Team image build number. Menu > Information > About > Build number > ENTER THIS NUMBER e.g. 4.2.028
5.3.034
Have you tried a flash WITHOUT settings restore?
Have you tried this? PLEASE SELECT YES OR NO.
No
Have you tried a flash WITH settings restore?
Have you tried this? PLEASE SELECT YES OR NO.
No
Results 1 to 7 of 7

Thread: Uninstalled EPG Search, Pressing yellow button causes crash

  1. 23-06-20, 09:09 #1
    sataday's Avatar
    sataday
    sataday is offline
    Title
    Senior Member
    Join Date
    Aug 2014
    Location
    Pandora, Alpha Centauri.
    Posts
    268
    Thanks
    118
    Thanked 33 Times in 25 Posts

    Uninstalled EPG Search, Pressing yellow button causes crash

    Just noticed after updating that when I short press the yellow button my solo2 crashes.
    VU+Solo2 (45E - 45W)
    Reply With Quote Reply With Quote
  2. Sponsored by World-of-Satellite.co.uk
  3. 23-06-20, 09:11 #2
    Andy_Hazza's Avatar
    Andy_Hazza
    Andy_Hazza is offline
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Attach crash logs so a Dev can take a look.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)
    Reply With Quote Reply With Quote
  4. 23-06-20, 09:35 #3
    sataday's Avatar
    sataday
    sataday is offline
    Title
    Senior Member
    Join Date
    Aug 2014
    Location
    Pandora, Alpha Centauri.
    Posts
    268
    Thanks
    118
    Thanked 33 Times in 25 Posts
    Log attached.

    Code:
    OpenViX Enigma2 Crashlog

Crashdate = Tue Jun 23 09:24:02 2020

Creator = OpenViX
Version = 5.3
Build = 034
Dev = 003
Type = release
Machine = vusolo2
URL = http://www.world-of-satellite.com
Compiled = Jun  6 2020
Skin = ViX-Night-HD/skin.xml
Component = Enigma2

Kernel CMDline = ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs
Nim Sockets = NIM Socket 0:
	Type: DVB-S2
	Name: BCM7356 DVB-S2 NIM (internal)
	Frontend_Device: 0
NIM Socket 1:
	Type: DVB-S2
	Name: BCM7356 DVB-S2 NIM (internal)
	Frontend_Device: 1


ER pid=18
<  3113.1372> [eDVBSectionReader] DMX_SET_FILTER pid=18
<  3113.1379> [eDVBSectionReader] DMX_SET_FILTER pid=18
<  3113.1389> [eDVBSectionReader] DMX_SET_FILTER pid=700
<  3113.1393> [eDVBSectionReader] DMX_SET_FILTER pid=700
<  3113.1401> [eDVBSectionReader] DMX_SET_FILTER pid=5000
<  3113.1405> [eDVBSectionReader] DMX_SET_FILTER pid=5000
<  3113.1414> [huffman] read.. '/usr/share/enigma2/otv_011a0000_0002_0802.dict'
<  3113.1415> [eEPGCache] abort non avail OpenTV EIT reading
<  3113.1415> [eDVBSectionReader] DMX_SET_FILTER pid=57
<  3113.6305> [eInputDeviceInit] 1 ae (174) 1
<  3113.6313> [InfoBarGenerics] KEY: 174 EXIT
<  3113.6317> [ActionMap] Keymap 'OkCancelActions' -> Action = 'cancel'.
<  3113.9701> [eInputDeviceInit] 0 ae (174) 1
<  3113.9708> [InfoBarGenerics] KEY: 174 EXIT
<  3114.2122> [eInputDeviceInit] 1 ae (174) 1
<  3114.2129> [InfoBarGenerics] KEY: 174 EXIT
<  3114.2133> [ActionMap] Keymap 'OkCancelActions' -> Action = 'cancel'.
<  3114.4441> [eInputDeviceInit] 0 ae (174) 1
<  3114.4448> [InfoBarGenerics] KEY: 174 EXIT
<  3114.4734> [eInputDeviceInit] 1 ae (174) 1
<  3114.4746> [InfoBarGenerics] KEY: 174 EXIT
<  3114.4751> [ActionMap] Keymap 'OkCancelActions' -> Action = 'cancel'.
<  3114.5983> [eInputDeviceInit] 0 ae (174) 1
<  3114.5991> [InfoBarGenerics] KEY: 174 EXIT
<  3114.6565> [eInputDeviceInit] 1 ae (174) 1
<  3114.6574> [InfoBarGenerics] KEY: 174 EXIT
<  3114.6578> [ActionMap] Keymap 'OkCancelActions' -> Action = 'cancel'.
<  3114.7811> [eInputDeviceInit] 0 ae (174) 1
<  3114.7821> [InfoBarGenerics] KEY: 174 EXIT
<  3114.8732> [eInputDeviceInit] 1 ae (174) 1
<  3114.8745> [InfoBarGenerics] KEY: 174 EXIT
<  3114.8749> [ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'hide'.
<  3114.9981> [eInputDeviceInit] 0 ae (174) 1
<  3114.9991> [InfoBarGenerics] KEY: 174 EXIT
<  3117.9020> [eDVBLocalTimerHandler] diff is 0
<  3117.9020> [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
<  3117.9021> [eDVBLocalTimerHandler] not changed
<  3117.9026> [eDVBChannel] getDemux cap=00
<  3120.1419> [eEPGCache] abort non avail schedule reading
<  3120.1428> [eEPGCache] abort non avail schedule other reading
<  3120.1437> [eEPGCache] abort non avail virgin nownext reading
<  3120.1451> [eEPGCache] abort non avail virgin schedule reading
<  3120.1454> [eEPGCache] abort non avail netmed schedule reading
<  3120.1462> [eEPGCache] abort non avail netmed schedule other reading
<  3120.1465> [eEPGCache] abort non avail viasat reading
<  3120.1935> [eEPGCache] nownext finished(1592900525)
<  3121.0029> [eInputDeviceInit] 1 197 (407) 1
<  3121.0039> [InfoBarGenerics] KEY: 407 ARROWRIGHT
<  3121.0051> [ActionMap] Keymap 'InfobarChannelSelection' -> Action = 'historyNext'.
<  3121.0164> refstr: 1:0:19:1B1D:802:2:11A0000:0:0:0:
<  3121.0204> [Skin] Processing screen 'HistoryZapSelector', position=(0, 0), size=(541 x 720) for module 'HistoryZapSelector'.
<  3121.0424> [Skin] Processing screen 'SimpleSummary' from list 'HistoryZapSelector_summary, SimpleSummary', position=(0, 0), size=(132 x 64) for module 'SimpleSummary'.
<  3121.3413> [eInputDeviceInit] 0 197 (407) 1
<  3121.3421> [InfoBarGenerics] KEY: 407 ARROWRIGHT
<  3129.3800> [eInputDeviceInit] 1 ae (174) 1
<  3129.3808> [InfoBarGenerics] KEY: 174 EXIT
<  3129.3817> [ActionMap] Keymap 'OkCancelActions' -> Action = 'cancel'.
<  3129.6121> [eInputDeviceInit] 0 ae (174) 1
<  3129.6128> [InfoBarGenerics] KEY: 174 EXIT
<  3152.7887> [eInputDeviceInit] 1 74 (116) 1
<  3152.7896> [InfoBarGenerics] KEY: 116 POWER
<  3152.7901> [ActionMap] Keymap 'GlobalActions' -> Action = 'power_down'.
<  3153.0202> [eInputDeviceInit] 0 74 (116) 1
<  3153.0212> [InfoBarGenerics] KEY: 116 POWER
<  3153.0823> [Standby] enter standby
<  3153.0843> [eDVBCAService] free slot 0 demux 0 for service 1:0:19:1B1D:802:2:11A0000:0:0:0:
<  3153.0844> [eDVBCAService] free service 1:0:19:1B1D:802:2:11A0000:0:0:0:
<  3153.1128> [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
<  3153.1128> [eDVBPCR0] DEMUX_STOP ok
<  3153.1129> [eDVBPCR0] destroy
<  3153.1129> [eDVBVideo0] DEMUX_STOP  ok
<  3153.1238> [eDVBVideo0] VIDEO_STOP ok
<  3153.1261> [eDVBVideo0] destroy
<  3153.1263> [eDVBAudio0] AUDIO_STOP ok
<  3153.1561> [eDVBAudio0] DEMUX_STOP ok
<  3153.1562> [eDVBAudio0] AUDIO_CONTINUE ok
<  3153.1627> [eDVBAudio0] destroy
<  3153.1627> [eDVBText0] DEMUX_STOP ok
<  3153.1637> [eDVBText0] destroy
<  3153.1673> [eDVBResourceManager] start release channel timer
<  3153.3213> [Skin] Processing screen 'Standby', position=(0, 0), size=(1280 x 720) for module 'Standby'.
<  3153.3244> [Skin] Processing screen 'StandbySummary', position=(0, 0), size=(132 x 64) for module 'StandbySummary'.
<  3153.3375> [eDboxLCD] setLCDBrightness 25
<  3153.3882> [FanControl]: setting fan values (standby mode): fanid = 0, voltage = 5, pwm = 0
<  3155.0850> [DVBCAHandler] no more services
<  3156.1674> [eDVBResourceManager] release cached channel (timer timeout)
<  3156.1675> [eDVBLocalTimerHandler] remove channel 0x1580bb8
<  3156.1676> [eEPGCache] remove channel 0x1580bb8
<  3156.1681> [eEPGCache] abort caching events !!
<  3156.1693> [eDVBResourceManager] stop release channel timer
<  3159.1738> [eDVBFrontend1] close frontend
<  3159.1741> [eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
<  3230.2373> [eInputDeviceInit] 1 74 (116) 1
<  3230.2381> [InfoBarGenerics] KEY: 116 POWER
<  3230.2385> [ActionMap] Keymap 'StandbyActions' -> Action = 'power'.
<  3230.2386> [Standby] leave standby
<  3230.2418> [Navigation] playing 1:0:19:1B1D:802:2:11A0000:0:0:0:
<  3230.2794> [Notifications] RemovePopup, id = ZapError
<  3230.2797> [eDVBResourceManager] allocate channel.. 0802:0002
<  3230.2798> [eDVBFrontend1] opening frontend
<  3230.2802> [eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
<  3230.2846> [eDVBFrontend1] tune
<  3230.2846> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
<  3230.2847> [eDVBFrontend1] prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 3 orbpos 282 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
<  3230.2847> [eDVBFrontend1] tuning to 1097 mhz
<  3230.2847> [eDVBChannel] OURSTATE: tuning
<  3230.2848> [eDVBServicePMTHandler] allocate Channel: res 0
<  3230.2848> [eDVBCIInterfaces] addPMTHandler 1:0:19:1B1D:802:2:11A0000:0:0:0:
<  3230.2849> [eDVBChannel] getDemux cap=00
<  3230.2849> [eDVBResourceManager] allocate demux cap=00
<  3230.2849> [eDVBResourceManager] allocating demux adapter=0, demux=0, source=1 fesource=1
<  3230.2849> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3230.5476> [eDboxLCD] setLCDBrightness 127
<  3230.9974> [FanControl]: setting fan values: fanid = 0, voltage = 15, pwm = 50
<  3231.0080> [eInputDeviceInit] 0 74 (116) 1
<  3231.0094> [InfoBarGenerics] KEY: 116 POWER
<  3231.0108> [eDVBFrontend1] set static current limiting
<  3231.0139> [eDVBFrontend1] invalidate current switch params
<  3231.0141> [eDVBFrontend1] setVoltage 1
<  3231.0141> [eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
<  3231.0145> [eDVBFrontend1] sleep 10ms
<  3231.0246> [eDVBFrontend1] set sequence pos 3
<  3231.0247> [eDVBFrontend1] update current switch params
<  3231.0247> [eDVBFrontend1] startTuneTimeout 5000
<  3231.0248> [eDVBFrontend1] setFrontend 1
<  3231.0248> [eDVBFrontend1] setting frontend
<  3231.0259> [eDVBFrontend1] fe event: status 0, inversion off, m_tuning 1
<  3231.0260> [eDVBFrontend1] sleep 500ms
<  3231.1252> [eDVBFrontend1] fe event: status 7, inversion off, m_tuning 2
<  3231.3255> [eDVBFrontend1] fe event: status 1f, inversion off, m_tuning 3
<  3231.3255> [eDVBChannel] OURSTATE: ok
<  3231.3255> [eDVBLocalTimerHandler] channel 0x1580bb8 running
<  3231.3256> [eDVBChannel] getDemux cap=00
<  3231.3256> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3257> [eDVBSectionReader] DMX_SET_FILTER pid=20
<  3231.3261> [eEPGCache] channel 0x1580bb8 running
<  3231.3261> [eDVBChannel] getDemux cap=00
<  3231.3261> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3262> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3262> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3263> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3263> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3263> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3264> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3264> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3265> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3265> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3265> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3266> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3266> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3266> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3267> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3267> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.3268> [eEPGCache] next update in 2 sec
<  3231.3268> [eDVBResourceManager] stop release channel timer
<  3231.3269> [eDVBChannel] getDemux cap=01
<  3231.3269> [eDVBResourceManager] allocate demux cap=01
<  3231.3269> [eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=1
<  3231.3269> [eDVBServicePMTHandler] ok ... now we start!!
<  3231.3269> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
<  3231.3269> [eDVBServicePlay] have 1 video stream(s) (1518), and 1 audio stream(s) (1519), and the pcr pid is 1518, and the text pid is 151b
<  3231.3271> [eDVBChannel] getDemux cap=01
<  3231.3314> [eTSMPEGDecoder] decoder state: play, vpid=1518, apid=1519
<  3231.3315> [eDVBPCR0] DMX_SET_PES_FILTER pid=0x1518 ok
<  3231.3315> [eDVBPCR0] DEMUX_START ok
<  3231.3345> [eDVBAudio0] DMX_SET_PES_FILTER pid=0x1519 ok
<  3231.3345> [eDVBAudio0] DEMUX_START ok
<  3231.3347> [eDVBAudio0] AUDIO_SET_BYPASS bypass=0 ok
<  3231.3900> [eDVBAudio0] AUDIO_PAUSE ok
<  3231.3924> [eDVBAudio0] AUDIO_PLAY ok
<  3231.3987> [eDVBVideo] Video Device: /dev/dvb/adapter0/video0
<  3231.3988> [eDVBVideo] demux device: /dev/dvb/adapter0/demux0
<  3231.4020> [eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
<  3231.4050> [eDVBVideo0] DMX_SET_PES_FILTER pid=0x1518 ok
<  3231.4050> [eDVBVideo0] DEMUX_START ok
<  3231.4052> [eDVBVideo0] VIDEO_FREEZE ok
<  3231.4079> [eDVBVideo0] VIDEO_PLAY ok
<  3231.4163> [eDVBText0] DMX_SET_PES_FILTER pid=0x151b ok
<  3231.4163> [eDVBText0] DEMUX_START ok
<  3231.4198> [eDVBVideo0] VIDEO_SLOWMOTION 0 ok
<  3231.4228> [eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
<  3231.4259> [eDVBVideo0] VIDEO_CONTINUE ok
<  3231.4288> [eDVBAudio0] AUDIO_CONTINUE ok
<  3231.4349> [eDVBTeletextParser] Starting!
<  3231.4349> [eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
<  3231.4350> [eDVBPESReader] Created. Opening demux
<  3231.4350> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.4352> [eDVBTeletextParser] created teletext subtitle PES reader!
<  3231.4353> [eDVBPESReader] Created. Opening demux
<  3231.4353> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.4354> [eDVBTeletextParser] starting PES reader on pid=151b
<  3231.4354> [eDVBPESReader] DMX_SET_PES_FILTER pid=151b
<  3231.4951> [eDVBCAService] new service 1:0:19:1B1D:802:2:11A0000:0:0:0:
<  3231.4952> [eDVBCAService] add demux 0 to slot 0 service 1:0:19:1B1D:802:2:11A0000:0:0:0:
<  3231.4960> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.4961> [eDVBSectionReader] DMX_SET_FILTER pid=0
<  3231.5684> [Notifications] RemovePopup, id = ZapError
<  3231.5685> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.5686> [eDVBSectionReader] DMX_SET_FILTER pid=0
<  3231.5703> [eDVBFrontend1] set dynamic current limiting
<  3231.5793> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.5795> [eDVBSectionReader] DMX_SET_FILTER pid=266
<  3231.5799> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.5800> [eDVBSectionReader] DMX_SET_FILTER pid=17
<  3231.5809> [eDVBServicePMTHandler] PATready
<  3231.5809> [eDVBServicePMTHandler] use pmtpid 0104 for service_id 1b1d
<  3231.5811> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.5812> [eDVBSectionReader] DMX_SET_FILTER pid=260
<  3231.5816> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.5816> [eDVBSectionReader] DMX_SET_FILTER pid=0
<  3231.7168> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
<  3231.7177> [Config] getResolvedKey config.autolanguage.audio_autoselect4 empty variable.
<  3231.7181> [Config] getResolvedKey config.autolanguage.subtitle_autoselect1 empty variable.
<  3231.7186> [Config] getResolvedKey config.autolanguage.subtitle_autoselect2 empty variable.
<  3231.7191> [Config] getResolvedKey config.autolanguage.subtitle_autoselect3 empty variable.
<  3231.7195> [Config] getResolvedKey config.autolanguage.subtitle_autoselect4 empty variable.
<  3231.7203> [eDVBServicePlay] have 1 video stream(s) (1518), and 2 audio stream(s) (151a, 1519), and the pcr pid is 1518, and the text pid is 151b
<  3231.7206> [eTSMPEGDecoder] decoder state: play, vpid=1518, apid=1519
<  3231.7245> [Config] getResolvedKey config.autolanguage.audio_autoselect4 empty variable.
<  3231.7249> [Config] getResolvedKey config.autolanguage.subtitle_autoselect1 empty variable.
<  3231.7253> [Config] getResolvedKey config.autolanguage.subtitle_autoselect2 empty variable.
<  3231.7257> [Config] getResolvedKey config.autolanguage.subtitle_autoselect3 empty variable.
<  3231.7261> [Config] getResolvedKey config.autolanguage.subtitle_autoselect4 empty variable.
<  3231.7652> [eDVBCIInterfaces] gotPMT
<  3231.7652> [eDVBCAService] don't build/send the same CA PMT twice
<  3231.7656> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.7657> [eDVBSectionReader] DMX_SET_FILTER pid=260
<  3231.7806> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.7806> [eDVBSectionReader] DMX_SET_FILTER pid=258
<  3231.9179> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3231.9181> [eDVBSectionReader] DMX_SET_FILTER pid=260
<  3232.1175> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3232.1176> [eDVBSectionReader] DMX_SET_FILTER pid=256
<  3232.3867> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3232.3868> [eDVBSectionReader] DMX_SET_FILTER pid=259
<  3232.5143> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3232.5144> [eDVBSectionReader] DMX_SET_FILTER pid=264
<  3232.7207> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3232.7208> [eDVBSectionReader] DMX_SET_FILTER pid=262
<  3232.7834> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  3232.7835> [eDVBSectionReader] DMX_SET_FILTER pid=257
<  3232.8632> [eDVBServicePMTHandler] sdt update done!
<  3233.3359> [eEPGCache] start caching events(1592900639)
<  3233.3360> [eDVBSectionReader] DMX_SET_FILTER pid=3842
<  3233.3364> [eDVBSectionReader] DMX_SET_FILTER pid=3003
<  3233.3368> [eDVBSectionReader] DMX_SET_FILTER pid=18
<  3233.3372> [eDVBSectionReader] DMX_SET_FILTER pid=18
<  3233.3380> [eDVBSectionReader] DMX_SET_FILTER pid=18
<  3233.3393> [eDVBSectionReader] DMX_SET_FILTER pid=700
<  3233.3397> [eDVBSectionReader] DMX_SET_FILTER pid=700
<  3233.3409> [eDVBSectionReader] DMX_SET_FILTER pid=5000
<  3233.3413> [eDVBSectionReader] DMX_SET_FILTER pid=5000
<  3233.3422> [huffman] read.. '/usr/share/enigma2/otv_011a0000_0002_0802.dict'
<  3233.3423> [eEPGCache] abort non avail OpenTV EIT reading
<  3233.3423> [eDVBSectionReader] DMX_SET_FILTER pid=57
<  3236.8528> [eInputDeviceInit] 1 190 (400) 1
<  3236.8541> [InfoBarGenerics] KEY: 400 YELLOW
<  3237.0851> [eInputDeviceInit] 0 190 (400) 1
<  3237.0859> [InfoBarGenerics] KEY: 400 YELLOW
<  3237.1131> [ActionMap] Keymap 'InfobarExtensions' -> Action = 'openEPGSearch'.
<  3237.1142> Traceback (most recent call last):
<  3237.1143>   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 57, in action
<  3237.1145>   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 2660, in showEPGSearch
<  3237.1148> ImportError: No module named EPGSearch.EPGSearch
<  3237.1150> [ePyObject] (CallObject(<bound method HelpableActionMap.action of <Components.ActionMap.HelpableActionMap instance at 0x64ffe6e8>>,('InfobarExtensions', 'openEPGSearch')) failed)
    VU+Solo2 (45E - 45W)
    Reply With Quote Reply With Quote
  5. 24-06-20, 21:56 #4
    abu baniaz's Avatar
    abu baniaz
    abu baniaz is offline
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,360
    Thanks
    6,441
    Thanked 9,160 Times in 6,235 Posts
    Smaller snippet of Sataday's crash log
    Code:
    <  3236.8541> [InfoBarGenerics] KEY: 400 YELLOW
<  3237.0851> [eInputDeviceInit] 0 190 (400) 1
<  3237.0859> [InfoBarGenerics] KEY: 400 YELLOW
<  3237.1131> [ActionMap] Keymap 'InfobarExtensions' -> Action = 'openEPGSearch'.
<  3237.1142> Traceback (most recent call last):
<  3237.1143>   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 57, in action
<  3237.1145>   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 2660, in showEPGSearch
<  3237.1148> ImportError: No module named EPGSearch.EPGSearch
<  3237.1150> [ePyObject] (CallObject(<bound method HelpableActionMap.action of <Components.ActionMap.HelpableActionMap instance at 0x64ffe6e8>>,('InfobarExtensions', 'openEPGSearch')) failed)
    Last edited by abu baniaz; 24-06-20 at 22:52. Reason: Sataday's crash not mine


    Click for FLASH & RESTORE
    Click for MANUAL & GUIDES
    Click for LINUX COMMANDS
    Click for SCREENSHOTS & ATTACHMENTS
    Reply With Quote Reply With Quote
  6. 24-06-20, 22:44 #5
    ccs's Avatar
    ccs
    ccs is offline
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,277 Times in 1,089 Posts
    I'm fine on 5.3.035 + latest epg mods, assuming we're talking about yellow on live tv.
    Reply With Quote Reply With Quote
  7. 24-06-20, 23:04 #6
    abu baniaz's Avatar
    abu baniaz
    abu baniaz is offline
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,360
    Thanks
    6,441
    Thanked 9,160 Times in 6,235 Posts
    I posted a snippet of OP's crash, it is not mine. I usually post the snippet of crash and attach (different to posting it) so it is easier to see while still having the whole crash log available for those needing to see it for more details. I cannot reproduce the crash either. I flashed Release 035 with no modifications and cannot reproduce it either. Perhaps the OP can update to 035 and also post actions required to cause the crash

    That code is on line 2662 in 5.3 035
    https://github.com/OpenViX/enigma2/b...py#L2662:L2684

    Maybe he uninstalled EPG search previously?
    Last edited by abu baniaz; 24-06-20 at 23:08.


    Click for FLASH & RESTORE
    Click for MANUAL & GUIDES
    Click for LINUX COMMANDS
    Click for SCREENSHOTS & ATTACHMENTS
    Reply With Quote Reply With Quote

  8. The Following User Says Thank You to abu baniaz For This Useful Post:

    sataday (25-06-20)
  9. 25-06-20, 09:48 #7
    sataday's Avatar
    sataday
    sataday is offline
    Title
    Senior Member
    Join Date
    Aug 2014
    Location
    Pandora, Alpha Centauri.
    Posts
    268
    Thanks
    118
    Thanked 33 Times in 25 Posts
    Maybe he uninstalled EPG search previously?
    It's quite possible I did a while ago and just noticed it now.
    I have now used button setup to program that button and and all is good now.
    Last edited by sataday; 25-06-20 at 09:51.
    VU+Solo2 (45E - 45W)
    Reply With Quote Reply With Quote
« FBC tuners: Diseqc switch with Universal LNB | Decoder mute »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     

Options

About

Welcome to Satellite Support Forum .: Home of OpenViX Team:.!

World-of-Satellite enthusiasts Satellite, IPTV, Technology, Audio visual Forum.

Any information provided on this site is not guaranteed in any way. Some articles may discuss topics that are illegal, so this information is provided for educational purposes only, your use of the content, downloads and files, or any part thereof, is made solely at your own risk and responsibility. Viewing Pay TV without a valid subscription is illegal. !! World-of-Satellite.com cannot be held responsible for the content of any information stored or posted on this forum.

Site Links

Social Media