Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 40

Thread: Opticum SCR 16UB Pro

  1. #16

    Title
    Member
    Join Date
    May 2017
    Posts
    76
    Thanks
    6
    Thanked 5 Times in 4 Posts
    Can you give me an idea where I will find this lines with NIMs save?
    I really want start from scratch.

    Thank You!

  2. #17

    Title
    Member
    Join Date
    May 2017
    Posts
    76
    Thanks
    6
    Thanked 5 Times in 4 Posts
    OK, I find this file (settings). I delete all lines with NIMs
    i start from scratch.
    When I use predefined Opticum SCRT 16 is not working, when I set manually is working.
    I setting like you just say. And steel I could watch 3 canals at once. So if I try run forth device, then one from already running 3 device are stops.
    And when I start run third device is marking as recording (it was not in Universal LNB!).
    I was thinking with Unicable it will be working even better.

  3. #18
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    What receiver are you using?

    I don't know what else to suggest, I have shared my knowledge to help you resolve the problem. I don't use ATV apart from the odd testing.

  4. #19

    Title
    Member
    Join Date
    May 2017
    Posts
    76
    Thanks
    6
    Thanked 5 Times in 4 Posts
    I like OpenATV, but I will be testing other image including Vix.
    But in general:
    Tuner A and B hardwire and not connected.
    Tuner C connected to A, but D connected to C, E to D and so on.
    Chanel's for Unicable always different for each tuner.

    Question:
    1) If I use CRC1 for 13e should I use same for 19e or different?
    2) For 13e use LNB1 for 19e also LNB1 or should LNB2 for 19e-?

    Thank You for your help, I really appreciate that.

  5. #20
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    Quote Originally Posted by goral View Post
    I like OpenATV, but I will be testing other image including Vix.
    But in general:
    Tuner A and B hardwire and not connected.
    Tuner C connected to A, but D connected to C, E to D and so on.
    Chanel's for Unicable always different for each tuner.

    Question:
    1) If I use CRC1 for 13e should I use same for 19e or different?
    2) For 13e use LNB1 for 19e also LNB1 or should LNB2 for 19e-?

    Thank You for your help, I really appreciate that.



    Just to recap:

    An FBC unit has two physical tuner screw things (I'm avoiding saying "connections"). These are A & B. Some people call these "root tuners". They can share each others signal device source. There are also 6 other demodulators which do not have their own screw-in signal supply source. Some people call these "leaf tuners".

    When configuring a non-FBC tuner, LNB number refers to the one on that tuner. As an example on old technology, a vu ultimo non-4k, with three single tuner modules, and all three have a separate supply from 13, 19.2 and 28.2, all LNBS will be number "1". If that is clear and easy to understand, the same logic applies to FBC tuners.

    [quote]
    2) For 13e use LNB1 for 19e also LNB1 or should LNB2 for 19e-?
    [quote]

    If you hooked up a 13e signal source only to Tuner A i.e is the the only LNB, it will be LNB 1. You do not have a second LNB on that Tuner.
    If you hooked up a 19.2e signal source only to Tuner B i.e is the the only LNB, it will also be LNB 1. You do not have a second LNB on that Tuner.

    Tuner A and B hardwire and not connected.
    Not necessarily. In the diagram you posted, yes.

    "Connected to" in Unicable language means "sharing signal supply source".

    You must configure (tell) each tuner what it physically has hooked up to it. As above, A and B can share each others signal source. If you are sharing a signal source, then say yes to connected. Your diagram shows that you are not sharing signal source between A&B. For you, the option should be no. Someone else might be and they should say yes. Golden rule of tuner configuration is that it must match what is hooked up to the tuner. People rarely describe what hardware they have hooked up to each tuner. Your diagram describes it. I have assumed that you are using two identical LNBs.

    Tuner C connected to A, but D connected to C, E to D and so on.
    As I said Above, I am guessing. You will have to check with ATV. They use different code. The daisy chaining is not possible in Vix/PLI

    Chanel's for Unicable always different for each tuner.
    Yes. A unicable LNB is designed for sharing among devices. Every device must request signal from that device on a unique channel. This applies to tuners on the same set top box. Otherwise two devices will ask for two differnt things to be delivered on the same frequency.

    Yo have two different LNBs. So you can use channel 1 for 13e and also channel 1 on 19.2 because they are on different tuners and are different devices. Important thing is that it is tuner specific.


    1) If I use CRC1 for 13e should I use same for 19e or different?
    I don't know what you mean.


    You are using OpenATv image that has different Unicable code. It is not in your interest to ask here because our code is not the same.

  6. The Following User Says Thank You to abu baniaz For This Useful Post:

    goral (24-06-20)

  7. #21

    Title
    Member
    Join Date
    May 2017
    Posts
    76
    Thanks
    6
    Thanked 5 Times in 4 Posts
    Quote Originally Posted by abu baniaz View Post

    Yo have two different LNBs. So you can use channel 1 for 13e and also channel 1 on 19.2 because they are on different tuners and are different devices. Important thing is that it is tuner specific.




    I don't know what you mean.


    You are using OpenATv image that has different Unicable code. It is not in your interest to ask here because our code is not the same.
    You just answer my question

    I know this forum is for different image, but this forum is much better for people like me, who looking for support and explanation.
    That why I ask question here.
    But I will be ask them about Tuner configuration under Unicable LNB.

    By the way thank You very much.

  8. #22
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    When you ask, best you attach diagrams and upload screenshots without people having to ask you to. Less room for ambiguity/misunderstanding

  9. #23

    Title
    Member
    Join Date
    May 2017
    Posts
    76
    Thanks
    6
    Thanked 5 Times in 4 Posts
    HI againe.
    I flash new OpenVIX.

    1. Is not possible to connect tuner D to C or E to D. I could only connect to tuner A or B.
    2. When I use predefined for my LNB is same as was under OpenATV only 3 tuner could working at once (1 physical and 2 connected to A).
    3. When I use user defined LNB and I put channels manually I once open 4 tuners.

    Do you think problem could be with LNB?


    tuner___a.jpgtuner___b.jpgtuner___c.jpgtuner___d.jpgtuner___e.jpgtuner___f.jpgtuner___g.jpgtuner___h.jpg

  10. #24
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Can you run the command string as per post #13
    Also which receiver are you using?

    .. and (sorry Abu) I always setup my lnb number up as e.g. schematic on post #12. So I woulld use lnb 1 and lnb2 -makes more sense to me (and works)
    Last edited by twol; 26-06-20 at 12:12.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  11. #25
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Uno 4K I think OP has @Twol


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  12. #26

    Title
    Member
    Join Date
    May 2017
    Posts
    76
    Thanks
    6
    Thanked 5 Times in 4 Posts
    Hi
    My reciver is VU+ Uno 4k SE

    And tunerconfig:
    Code:
    config.Nims.0.advanced.lnb.1.format=jess
    config.Nims.0.advanced.lnb.1.lof=unicable
    config.Nims.0.advanced.lnb.1.scrfrequency=1275
    config.Nims.0.advanced.lnb.1.scrList=8
    config.Nims.0.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.0.advanced.lnb.1.unicableManufacturer=Opticum
    config.Nims.0.advanced.lnb.1.unicableProduct=SCR 16UB Pro
    config.Nims.0.advanced.sat.130.lnb=1
    config.Nims.0.advanced.sats=130
    config.Nims.0.configMode=advanced
    config.Nims.1.advanced.lnb.1.lof=unicable
    config.Nims.1.advanced.lnb.1.scrList=1
    config.Nims.1.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.1.advanced.lnb.1.unicableManufacturer=Opticum
    config.Nims.1.advanced.lnb.1.unicableProduct=SCR 16UB Pro
    config.Nims.1.advanced.sat.192.lnb=1
    config.Nims.1.configMode=advanced
    config.Nims.2.advanced.lnb.1.format=jess
    config.Nims.2.advanced.lnb.1.lof=unicable
    config.Nims.2.advanced.lnb.1.scrfrequency=1340
    config.Nims.2.advanced.lnb.1.scrList=9
    config.Nims.2.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.2.advanced.lnb.1.unicableManufacturer=Opticum
    config.Nims.2.advanced.lnb.1.unicableProduct=SCR 16UB Pro
    config.Nims.2.advanced.sat.130.lnb=1
    config.Nims.2.advanced.sats=130
    config.Nims.2.advanced.unicableconnected=True
    config.Nims.2.advanced.unicableconnectedTo=0
    config.Nims.2.configMode=advanced
    config.Nims.3.advanced.lnb.1.format=jess
    config.Nims.3.advanced.lnb.1.lof=unicable
    config.Nims.3.advanced.lnb.1.scrfrequency=1485
    config.Nims.3.advanced.lnb.1.scrList=10
    config.Nims.3.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.3.advanced.lnb.1.unicableManufacturer=Opticum
    config.Nims.3.advanced.lnb.1.unicableProduct=SCR 16UB Pro
    config.Nims.3.advanced.sat.130.lnb=1
    config.Nims.3.advanced.sats=130
    config.Nims.3.advanced.unicableconnected=True
    config.Nims.3.advanced.unicableconnectedTo=0
    config.Nims.3.configMode=advanced
    config.Nims.4.advanced.lnb.1.format=jess
    config.Nims.4.advanced.lnb.1.lof=unicable
    config.Nims.4.advanced.lnb.1.scrfrequency=1550
    config.Nims.4.advanced.lnb.1.scrList=11
    config.Nims.4.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.4.advanced.lnb.1.unicableManufacturer=Opticum
    config.Nims.4.advanced.lnb.1.unicableProduct=SCR 16UB Pro
    config.Nims.4.advanced.sat.130.lnb=1
    config.Nims.4.advanced.sats=130
    config.Nims.4.advanced.unicableconnected=True
    config.Nims.4.advanced.unicableconnectedTo=0
    config.Nims.4.configMode=advanced
    config.Nims.5.advanced.lnb.1.format=jess
    config.Nims.5.advanced.lnb.1.lof=unicable
    config.Nims.5.advanced.lnb.1.scrfrequency=1650
    config.Nims.5.advanced.lnb.1.scrList=12
    config.Nims.5.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.5.advanced.lnb.1.unicableManufacturer=Opticum
    config.Nims.5.advanced.lnb.1.unicableProduct=SCR 16UB Pro
    config.Nims.5.advanced.sat.130.lnb=1
    config.Nims.5.advanced.sats=130
    config.Nims.5.advanced.unicableconnected=True
    config.Nims.5.advanced.unicableconnectedTo=0
    config.Nims.5.configMode=advanced
    config.Nims.6.advanced.lnb.1.lof=unicable
    config.Nims.6.advanced.lnb.1.scrList=2
    config.Nims.6.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.6.advanced.lnb.1.unicableManufacturer=Opticum
    config.Nims.6.advanced.lnb.1.unicableProduct=SCR 16UB Pro
    config.Nims.6.advanced.sat.192.lnb=1
    config.Nims.6.advanced.unicableconnected=True
    config.Nims.6.advanced.unicableconnectedTo=1
    config.Nims.6.configMode=advanced
    config.Nims.7.advanced.lnb.1.lof=unicable
    config.Nims.7.advanced.lnb.1.scrList=3
    config.Nims.7.advanced.lnb.1.unicable=unicable_lnb
    config.Nims.7.advanced.lnb.1.unicableManufacturer=Opticum
    config.Nims.7.advanced.lnb.1.unicableProduct=SCR 16UB Pro
    config.Nims.7.advanced.sat.192.lnb=1
    config.Nims.7.advanced.unicableconnected=True
    config.Nims.7.advanced.unicableconnectedTo=1
    config.Nims.7.configMode=advanced

  13. #27
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    As I said earlier, OpenATV using different unicable code. The tuner configuration code is also different.

    As was confirmed by one of their expeienced members, their code needs you to daisy chain the tuners and also use Jess dicton. Jess is another name for unicable 2.

    Our and PLI does not require daisy chaining. You can only share/connect to something that can have a signal wire, i.e root tuner. You cannot connect to a leaf tuner on PLI/ViX.

  14. #28
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    Are you using two identical LNBs?

  15. #29

    Title
    Member
    Join Date
    May 2017
    Posts
    76
    Thanks
    6
    Thanked 5 Times in 4 Posts
    Quote Originally Posted by abu baniaz View Post
    Are you using two identical LNBs?
    Yes, both are the same.

  16. #30
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,338
    Thanks
    6,422
    Thanked 9,146 Times in 6,224 Posts
    You have to fault find. When fault findining, you have to reduce your variables. So test one LNB at a time on one tuner at a time. To avoid confusion, put blue sticker on one LNB, and a red sticker on the other LNB.


    You have to start from "zero state", i.e no older tuner configuration from before. So stop enigma2 with "init 4" command. Delete all those lines in starting with NIMS in /etc/enigma2/settings, save, transfer back and restart with "init 3" command.

    Test 1
    Put Blue LNB on 13e position on dish. Hook up to tuner A.

    Set tuner A as 13e SCR 1
    B= not configured
    C = SCR 3. connected to A
    D= SCR 4, Connected to A
    E= SCR 5, Connected to A
    F= SCR 6, Connected to A
    G= SCR 7, Connected to A
    H= SCR 8, Connected to A

    Try multiple channels on 13e. Do you have any problems?

    Test 2
    Go to "zero state"

    Put Red LNB on 19.2e position on dish. Hook up to tuner B
    A= Not configured
    Set tuner Bs 19.2e SCR 1
    C = SCR 3, connected to B
    D= SCR 4, Connected to B
    E= SCR 5, Connected to B
    F= SCR 6, Connected to B
    G= SCR 7, Connected to B
    H= SCR 8, Connected to B

    Try multiple channels on 19.2e. Do you have any problems?

    After your results, there are two more tests.

Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.