Opticum SCR 16UB Pro

[goral]

Hi
I have Unicable II LNB Which doesn't appear on the list, so I guess I should use the user settings.
How to set parameters marked in the frame
In the picture below.
Where to get this data from?

settings.png

Thanks.

[abu baniaz]

Which LNB is it? Did it have a paper with details on it?

[goral]

Hi
Is Opticum SCR 16UB Pro

Only details is on the box:

doc.jpg

No other documentation.

[twol]

Hi
Is Opticum SCR 16UB Pro

Only details is on the box:

doc.jpg

No other documentation.

You just need the values in the 1st box in the picture - there is already the 8 scr version for Opticum defined. If you want to setup you will find the file unicable.xml in /usr/share/enigma2 just copy to a PC and add the additional 8 values to the existing Opticum entry and copy back and use that for setup

[goral]

Thank You.
Just one question.
In unicable.xml for SRC 5, 6, 7 and 8 are different value then on original LNB box.

(SRC 5 - 970, SRC 6 - 1030, SRC 7 -1090, SRC 8 - 1150)

Should I correct it as it is on the box?
or is just a print mistake on the box and the values in xml are correct?

[twol]

Thank You.
Just one question.
In unicable.xml for SRC 5, 6, 7 and 8 are different value then on original LNB box.

(SRC 5 - 970, SRC 6 - 1030, SRC 7 -1090, SRC 8 - 1150)

Should I correct it as it is on the box?
or is just a print mistake on the box and the values in xml are correct?

Use the box figures they will be correct for that model

Or just add your model to the list using the box values! Using the other model as a guide

[abu baniaz]

Transfer this file to /usr/share/enigma2 and then restart. I have added your LNB, you will be able to select it. The change will also be included on the image after 5.3 034.

As a general rule, if your LNB is not listed, have a look at the xml file using Notepad++ (not windows notepad). Find any LNB that has the same user bands as your LNB. You can use it.

EDIT:
Attachment removed as updated file is in Release image now

[abu baniaz]

Just noticed from your screenshot that you are not using OpenViX. OpenATV uses a different format, so the XML file I uploaded is likely to crash on OpenATV.

[abu baniaz]

I have moved the posts from the other thread.

[goral]

HI
I put my Unicable II LNB and problem is - I could watch 3 different channel, but when I try use forth is say connection error. When I look on VU+ uno 4k se lcd tree (A, C, D) tuner are green (active) and when I start watching forth channel E is green and just after 20 sec. is gone and VLC says "connection error". It happen on all my devices (I tested different scenario).
In Tuner configuration:

Tuner's

tuner001.PNG


Tuner A

tuner002.PNG


Tuner C, D and E with different chanels

[abu baniaz]

I cannot visualise the hardware you have. Can you re-do your diagram please? Add orbital positions too please. Also, if it helps for future, you can take screenshots using your web browser. See here:https://www.world-of-satellite.com/s...o-attach-files
The pictures you have are good enough, no need to re-upload.

[goral]

Diagram:


lnb_konf.png


Scenario:
Tuner A hardwire to 13e
Tuner B hardwire to 19e
Tuner C, D, E, F - connected to Tuner A (with different channels -13e)
Tuner G, H - connected to Tuner B (with different channels -19e).

So, problem is: Running Tuner A, C, D are OK, but when I add tuner E is problem, not connected.

Also, when I use tuner B and then tuner G is marking as recording. It was not happen when Use universal duo LNB.

Is anything wrong with my settings on screenshot in my last post?

[abu baniaz]

A common mistake is to set a satellite on a tuner, and later change to a different configuration and leave that satellite on that tuner as it was but it is not visible. I hope that makes sense.
Can you run this command and upload mytunerconfig.txt from tmp directory please?

cat /etc/enigma2/settings | grep config.Nims > /tmp/mytunerconfig.txt

You have also overlapped the letters in your description. It would have been better to have all 8 screenshots, just in case you made a mistake

EDIT:
Unicable posts moved from the Diseqc switch thread.

[goral]

A common mistake is to set a satellite on a tuner, and later change to a different configuration and leave that satellite on that tuner as it was but it is not visible. I hope that makes sense.
Can you run this command and upload mytunerconfig.txt from tmp directory please?

cat /etc/enigma2/settings | grep config.Nims > /tmp/mytunerconfig.txt

config.Nims.0.dvbs.advanced.lnb.1.lof=unicable
config.Nims.0.dvbs.advanced.lnb.1.satcrvcouserEN50494.0=1210
config.Nims.0.dvbs.advanced.lnb.1.unicable=unicable_user
config.Nims.0.dvbs.advanced.lnb.1.unicableLnb.Opticum.product=SCR 16UB PRO)
config.Nims.0.dvbs.advanced.lnb.1.unicableLnb.Opticum.vco.SCR 16UB PRO).0=1210
config.Nims.0.dvbs.advanced.lnb.1.unicableLnb.Opticum.vco.SCR 16UB PRO).1=1420
config.Nims.0.dvbs.advanced.lnb.1.unicableLnbManufacturer=Opticum
config.Nims.0.dvbs.advanced.sat.130.lnb=1
config.Nims.0.dvbs.advanced.sats=130
config.Nims.0.dvbs.configMode=advanced
config.Nims.0.dvbs.diseqcA=192
config.Nims.0.dvbs.diseqcB=130
config.Nims.0.dvbs.diseqcC=3601
config.Nims.0.dvbs.diseqcD=3601
config.Nims.0.dvbs.diseqcMode=diseqc_a_b
config.Nims.1.dvbs.advanced.lnb.1.lof=unicable
config.Nims.1.dvbs.advanced.lnb.1.satcrvcouserEN50494.0=1210
config.Nims.1.dvbs.advanced.lnb.1.unicable=unicable_user
config.Nims.1.dvbs.advanced.sat.192.lnb=1
config.Nims.1.dvbs.configMode=advanced
config.Nims.1.dvbs.diseqcA=192
config.Nims.1.dvbs.diseqcB=130
config.Nims.1.dvbs.diseqcC=3601
config.Nims.1.dvbs.diseqcD=3601
config.Nims.1.dvbs.diseqcMode=diseqc_a_b
config.Nims.2.dvbs.advanced.lnb.1.lof=unicable
config.Nims.2.dvbs.advanced.lnb.1.satcruserEN50494=2
config.Nims.2.dvbs.advanced.lnb.1.satcrvcouserEN50494.0=1420
config.Nims.2.dvbs.advanced.lnb.1.satcrvcouserEN50494.1=1420
config.Nims.2.dvbs.advanced.lnb.1.unicable=unicable_user
config.Nims.2.dvbs.advanced.lnb.1.unicableLnb.Opticum.product=SCR 16UB PRO)
config.Nims.2.dvbs.advanced.lnb.1.unicableLnb.Opticum.scr.SCR 16UB PRO)=3
config.Nims.2.dvbs.advanced.lnb.1.unicableLnb.Opticum.vco.SCR 16UB PRO).2=1680
config.Nims.2.dvbs.advanced.lnb.1.unicableLnbManufacturer=Opticum
config.Nims.2.dvbs.advanced.lnb.2.lof=unicable
config.Nims.2.dvbs.advanced.lnb.2.satcrvcouserEN50494.0=1420
config.Nims.2.dvbs.advanced.lnb.2.unicable=unicable_user
config.Nims.2.dvbs.advanced.lnb.2.unicableMatrix.Technisat.product=TechniRouter 5/1x4
config.Nims.2.dvbs.advanced.lnb.2.unicableMatrix.Technisat.vco.TechniRouter 5/1x4.0=1210
config.Nims.2.dvbs.advanced.lnb.2.unicableMatrixManufacturer=Technisat
config.Nims.2.dvbs.advanced.sat.130.lnb=1
config.Nims.2.dvbs.advanced.sat.192.lnb=2
config.Nims.2.dvbs.advanced.sats=130
config.Nims.2.dvbs.advanced.unicableconnected=true
config.Nims.2.dvbs.advanced.unicableconnectedTo=0
config.Nims.2.dvbs.configMode=advanced
config.Nims.3.dvbs.advanced.lnb.1.lof=unicable
config.Nims.3.dvbs.advanced.lnb.1.satcruserEN50494=3
config.Nims.3.dvbs.advanced.lnb.1.satcrvcouserEN50494.2=1680
config.Nims.3.dvbs.advanced.lnb.1.unicable=unicable_user
config.Nims.3.dvbs.advanced.sat.130.lnb=1
config.Nims.3.dvbs.advanced.sats=130
config.Nims.3.dvbs.advanced.unicableconnected=true
config.Nims.3.dvbs.advanced.unicableconnectedTo=0
config.Nims.3.dvbs.configMode=advanced
config.Nims.4.dvbs.advanced.lnb.1.lof=unicable
config.Nims.4.dvbs.advanced.lnb.1.satcruserEN50494=4
config.Nims.4.dvbs.advanced.lnb.1.satcrvcouserEN50494.3=2040
config.Nims.4.dvbs.advanced.lnb.1.unicable=unicable_user
config.Nims.4.dvbs.advanced.sat.130.lnb=1
config.Nims.4.dvbs.advanced.sats=130
config.Nims.4.dvbs.advanced.unicableconnected=true
config.Nims.4.dvbs.advanced.unicableconnectedTo=0
config.Nims.4.dvbs.configMode=advanced
config.Nims.5.dvbs.advanced.lnb.1.lof=unicable
config.Nims.5.dvbs.advanced.lnb.1.satcruserEN50494=5
config.Nims.5.dvbs.advanced.lnb.1.satcrvcouserEN50494.4=985
config.Nims.5.dvbs.advanced.lnb.1.unicable=unicable_user
config.Nims.5.dvbs.advanced.sat.130.lnb=1
config.Nims.5.dvbs.advanced.sats=130
config.Nims.5.dvbs.advanced.unicableconnected=true
config.Nims.5.dvbs.advanced.unicableconnectedTo=0
config.Nims.5.dvbs.configMode=advanced
config.Nims.6.dvbs.advanced.lnb.1.lof=unicable
config.Nims.6.dvbs.advanced.lnb.1.satcruserEN50494=2
config.Nims.6.dvbs.advanced.lnb.1.satcrvcouserEN50494.1=1420
config.Nims.6.dvbs.advanced.lnb.1.unicable=unicable_user
config.Nims.6.dvbs.advanced.sat.192.lnb=1
config.Nims.6.dvbs.advanced.unicableconnected=true
config.Nims.6.dvbs.advanced.unicableconnectedTo=1
config.Nims.6.dvbs.configMode=advanced
config.Nims.7.dvbs.advanced.lnb.1.lof=unicable
config.Nims.7.dvbs.advanced.lnb.1.satcruserEN50494=3
config.Nims.7.dvbs.advanced.lnb.1.satcrvcouserEN50494.2=1680
config.Nims.7.dvbs.advanced.lnb.1.unicable=unicable_user
config.Nims.7.dvbs.advanced.sat.192.lnb=1
config.Nims.7.dvbs.advanced.unicableconnected=true
config.Nims.7.dvbs.advanced.unicableconnectedTo=0
config.Nims.7.dvbs.configMode=advanced

You have also overlapped the letters in your description. It would have been better to have all 8 screenshots, just in case you made a mistake

Yes, I change mind and I need 5x 13e and 3x 19e

Scrennshots:

tuner_a.jpgtuner_b.jpgtuner_c.jpgtuner_d.jpgtuner_e.jpgtuner_f.jpgtuner_g.jpgtuner_h.jpg

[abu baniaz]

You have made an error with the connected to selection for 19.2. That should be B.

OpenATV uses different code for unicable. I think you have to daisy-chain them, see below. Best you ask on OpenATV forum to clarify.

A = 13E
C connected to A
D connected to C
E connected to D
F connected to E

B = 19.2
G connected to B
H connected to G

Alternatively, it might be that it is failing on the fifth SCR, this might be because you have selected Unicable 1. (Diction). I am just guessing

I have added your LNB to the ATV file and submitted a pull request, hopefully it is correct. I attach it to this thread for you. Please unzip before using

There is a lot of unused entries in your settings file, best to start again. To do this, stop Enigma2 with "init 4" command, delete all the lines that start with NIMs, save, transfer back, restart with "init 3". (If you are going to use the file I have attached, transfer it before restarting)