Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 2 of 2 FirstFirst 12
Results 16 to 26 of 26

Thread: Xtrend ET-10000 Issue

  1. #16

    Title
    Member
    Join Date
    Aug 2015
    Posts
    36
    Thanks
    5
    Thanked 2 Times in 2 Posts
    Had a new HDMI cable delivered last night and just set the receiver up with it only to find nothing's changed, the same problem exists!
    As soon as i press any of the up/down/left/right arrow keys on the remote to navigate through the menu the screen turns black and stays black.
    Won't be wasting any more time and money so sending it back to the seller.

  2. #17
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by giorgoulla99 View Post
    Had a new HDMI cable delivered last night and just set the receiver up with it only to find nothing's changed, the same problem exists!
    As soon as i press any of the up/down/left/right arrow keys on the remote to navigate through the menu the screen turns black and stays black.
    Won't be wasting any more time and money so sending it back to the seller.
    Have you scanned channels and are you actually on a service/channel that works? Also which skin are you using?
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  3. #18

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2010
    Posts
    3,007
    Thanks
    1,347
    Thanked 427 Times in 391 Posts
    Using the arrow's button you say you have a blank screen so no picture but does that mean channels are black and no menu is shown also or is the menu seen.Presume feeds are setup correctly and box has a network ip.

  4. #19

    Title
    Member
    Join Date
    Aug 2015
    Posts
    36
    Thanks
    5
    Thanked 2 Times in 2 Posts
    No, nothing to do with the actual channels - the entire menu and set up goes black as soon as i select any of the arrow keys on the remote in order to navigate through the menu.
    I cannot see anything to set anything up or scan.

  5. The Following User Says Thank You to giorgoulla99 For This Useful Post:

    cactikid (14-06-20)

  6. #20

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2010
    Posts
    3,007
    Thanks
    1,347
    Thanked 427 Times in 391 Posts
    So the question is could hdmi port be faulty,can you try scart leads or phono leads to see if you get a stable picture.
    Webif on pc if you have an ip address to also check on.

  7. #21

    Title
    Member
    Join Date
    Aug 2015
    Posts
    36
    Thanks
    5
    Thanked 2 Times in 2 Posts
    The receiver is packaged up and ready for the courier to collect as it's going back to the seller.

  8. #22
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Quote Originally Posted by giorgoulla99 View Post
    The receiver is packaged up and ready for the courier to collect as it's going back to the seller.
    Don’t blame ya. I was never happy with my ET10K when I had one briefly.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  9. #23

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2010
    Posts
    3,007
    Thanks
    1,347
    Thanked 427 Times in 391 Posts
    Quote Originally Posted by Andy_Hazza View Post
    Don’t blame ya. I was never happy with my ET10K when I had one briefly.


    Sent from my iPhone using Tapatalk
    What issues Andy?

  10. #24

    Title
    Member
    Join Date
    Aug 2015
    Posts
    36
    Thanks
    5
    Thanked 2 Times in 2 Posts
    Would love to know what issues you had, from experience of this receiver, Andy.
    Need to buy a replacement to my Xtrend 9200 but only one that meets the following criteria:
    must have excellent picture quality which the Xtrend 9200 excells in for anything non 4k,
    be fast to boot up, fast to operate/channel change/use of plugins etc, large memory and fast
    processor, do not want to have the 2 second frozen image between channel changes that i've read
    some receivers have, must be able to run the usual softcams, oscam and Cccam and a def must is
    stable iptv use. If there are any receivers out there that would suit please kindly let me know as i was looking
    for another ET-10000 but maybe that wouldn't be a good idea after all.

  11. #25
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by giorgoulla99 View Post
    Would love to know what issues you had, from experience of this receiver, Andy.
    Need to buy a replacement to my Xtrend 9200 but only one that meets the following criteria:
    must have excellent picture quality which the Xtrend 9200 excells in for anything non 4k,
    be fast to boot up, fast to operate/channel change/use of plugins etc, large memory and fast
    processor, do not want to have the 2 second frozen image between channel changes that i've read
    some receivers have, must be able to run the usual softcams, oscam and Cccam and a def must is
    stable iptv use. If there are any receivers out there that would suit please kindly let me know as i was looking
    for another ET-10000 but maybe that wouldn't be a good idea after all.
    I never had an issue with any of the Xtrend boxes(in fact the ET8500 is my all time favourite), but if you want a non HiSilicon receiver (channel delay is typical) then perhaps the Edision would suit your requirements
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  12. #26
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,276 Times in 1,089 Posts
    I've had an ET10K for over 5 years and can't fault it!

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.