Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
Zgemma H9 C/S into Giga4K
mujtba67 (22-04-20)
Hi again
i think the dealer which i boat the box from him he disable the software update
there is way to enable it again ?
Just usb flash and setup as a new box (no settings or plugins restores) and you will be fine.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
Zgemma H9 C/S into Giga4K
Just reflash and setup as new. Then when you reinstall everything, just copy your Oscam config files over using an FTP client.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
mujtba67 (22-04-20)
The Vix "plugin" is not seen in the plugin menu. You do not install it, it is part of the Vix image
You can access it by two ways:
Blue > Vix
Menu > Setup > Vix
If it is missing, you will need to manually save your configuration files and manually restore them after flashing latest images. See this guide/thread
https://www.world-of-satellite.com/s...older-than-4-2
Last edited by abu baniaz; 22-04-20 at 11:54.
[QUOTE=abu baniaz;496493]The Vix "plugin" is not seen in the plugin menu. You do not install it, it is part of the Vix image
You can access it by two ways:
Blue > Vix
Menu > Setup > Vix
If it is missing, you will need to manually save your configuration files and manually restore them after flashing latest images. See this guide/thread
https://www.world-of-satellite.com/s...older-than-4-2[/QUOTE
I did the 2nd solution but see the pic i didn't find storage section when i insert SD card
but when i insert flash memory storage section its shown
1_0_19_131_51_2BE_1040000_0_0_0_20200426203201.jpg
Can anyone help plz if it’s possible
Get yourself a usb stick
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
this is my last post for this problem
1_0_19_12C2_30_800_DCA0000_0_0_0_20200503013143.jpg
1_0_19_12C2_30_800_DCA0000_0_0_0_20200503010553.jpg
i have tried more than type of the SD card and same issue