Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 2 of 2 FirstFirst 12
Results 16 to 28 of 28

Thread: AX HD61 Twin - Blue Light

  1. #16
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    @daz450 I hate to tell you, but I eventually installed ATV 6.4 that has the all the LED controls and I hate to tell you this but it either turns on/off the diagonal light. ........ so I guess before you are just lucky that the ATV6.3 image you had installed left teh light on.
    Most users want the ability especially at night to turn the Led lights off - and now you can turn off both Leds if you want to do that
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  2. #17

    Title
    Senior Member
    Join Date
    Apr 2012
    Posts
    370
    Thanks
    49
    Thanked 47 Times in 33 Posts
    Thanks for looking into it. I am using 6.4 ATV and light is on.

  3. #18
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by daz450 View Post
    Thanks for looking into it. I am using 6.4 ATV and light is on.
    Which ATV image date??? And does it stay on when you go to standby?... because mine doesn‘t on build 24/04/2020
    Last edited by twol; 24-04-20 at 18:24.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  4. #19

    Title
    Senior Member
    Join Date
    Apr 2012
    Posts
    370
    Thanks
    49
    Thanked 47 Times in 33 Posts
    No it goes off on standby. Its build 0 17 04 20

  5. #20

    Title
    Senior Member
    Join Date
    Apr 2012
    Posts
    370
    Thanks
    49
    Thanked 47 Times in 33 Posts
    Updated to 22 04 20 Blue light still working on ATV

  6. The Following User Says Thank You to daz450 For This Useful Post:

    Andy_Hazza (24-04-20)

  7. #21
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Yes - it does and it goes off in standby which is how the next ViX version release will act
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  8. The Following User Says Thank You to twol For This Useful Post:

    abu baniaz (25-04-20)

  9. #22
    CRUMBLIN's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Dec 2018
    Location
    West Wales
    Posts
    34
    Thanks
    46
    Thanked 10 Times in 8 Posts
    A strip of black insulating tape stuck over the offending light is effective, works on my car dash lights 100%.

  10. #23
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Quote Originally Posted by CRUMBLIN View Post
    A strip of black insulating tape stuck over the offending light is effective, works on my car dash lights 100%.
    I think you’ve not read the thread properly. The OP would like the light to be on in standby mode.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  11. #24
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by Andy_Hazza View Post
    I think you’ve not read the thread properly. The OP would like the light to be on in standby mode.


    Sent from my iPhone using Tapatalk
    Thanks Andy I was starting to think I had mis-read the post! The new setup setting (as per ATV) will allow it to be off or on when watching - rest of the time its off
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  12. The Following User Says Thank You to twol For This Useful Post:

    Andy_Hazza (25-04-20)

  13. #25
    Joe_90's Avatar
    Title
    Moderator
    Join Date
    Mar 2014
    Location
    Wicklow, Ireland
    Posts
    4,100
    Thanks
    1,265
    Thanked 1,115 Times in 879 Posts
    It's a most confusing thread all right. I can't understand why you would want a bright blue LED to be on when the receiver is in standby! I had to use the insulating tape fix for the blue LED on my Miraclebox which only illuminated when in deep standby and lit up the whole bedroom! Post #20 indicates that the LED is on in standby in the latest ATV build, yet @twol says that the LED is off in standby on ATV. The truth lies out there somwewhere...
    GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony STR-DN 1060, Sony UHP-H1 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers

  14. #26

    Title
    Senior Member
    Join Date
    May 2019
    Posts
    110
    Thanks
    14
    Thanked 28 Times in 26 Posts
    Different Box Zgemma h9 Combo.

    On OpenATV 6.4 led stays on (red) in Standby but goes off in Deep Standby. I would like led off in Deep Standby but still have clock.
    By led I mean power led.

  15. #27
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,276 Times in 1,089 Posts
    Quote Originally Posted by urie View Post
    Different Box Zgemma h9 Combo.

    On OpenATV 6.4 led stays on (red) in Standby but goes off in Deep Standby. I would like led off in Deep Standby but still have clock.
    By led I mean power led.
    No chance - deep standby means the box is pretty much switched off and certainly not running enigma, just a basic counter so it can wake up when scheduled to do so.

  16. The Following User Says Thank You to ccs For This Useful Post:

    urie (25-04-20)

  17. #28
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by urie View Post
    Different Box Zgemma h9 Combo.

    On OpenATV 6.4 led stays on (red) in Standby but goes off in Deep Standby. I would like led off in Deep Standby but still have clock.
    By led I mean power led.
    Actually for the HD61, there are 3 settings in use for the power LED (compared to the diagonal LED - called Control LED for some reason) - and you can turn on/off in “live“ mode, standby and deep standby (on some boxes you can even change the colour) - I just hope nobody comes up with more options as there are so many setup options for Led control that it is becoming crazy (different boxes, different Proc entries) -now I am wondering about the h9Combo will go and try it
    Last edited by twol; 25-04-20 at 13:20.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  18. The Following 2 Users Say Thank You to twol For This Useful Post:

    Sicilian (28-04-20),urie (25-04-20)

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.