When I go to the 'settings' to have a look at my backups, there is only a yellow bar with no text at all to be seen. So unable to install any of my backups as I can't see any details of them, Don't want to have to do a full flash/install if possible.
Hit menu key and see where you are saving the backups!
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Which skin are you using?
Media/hdd when I go to settings/vix all I get is a single yellow bar with no text in and when I press menu, this is what it shows, I have not had any problems in the past until I tried to update the software and the box froze for ages so had to turn it off then back on.Originally Posted by twol
Thanks for your reply, its Blue/HD
Maybe wrong Abu, but there was change a while back (mine) that meant sometimes users had to check where their backups were being saved (the order of potential devices was changed) which meant that the setting was changed from their normal setting - hence hitting menu and checking the location for saved Backups could resolve his issue... if thats true, it will also be changed in ImageManager
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Switch to default skin and check if it shows
If you hit the menu key and then —> key on the file location does it give you a choice??
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
no, it just highlights another yellow bar further down with no text in it, also when you press epg to make a recording there's no text in the small yellow apply button either.
No just the same, in fact whenever I want to change/view any of the settings there's just color bars, no text in them
Are you going to the ViX BackupManager and hitting the Menu key when in BackupManager or just hitting menu key in normal operation?
I am talking about the former
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
yes I'm scrolling down to 'vix' backup manager then menu.
Blue button > Backup Manager > Menu
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
all I get is numbered coloured dots/ovals with numbers 1 to ten with no text beside them informing you of their functions
Maybe this is the cause of your problems?
Posting Permissions
Reply With Quote