Hi i am looking to upgrade my Vix image but i do not want to lose all my settings ect can i still use back up with a USB upgrade or is it a start from scratch job ?
thanks
Hi i am looking to upgrade my Vix image but i do not want to lose all my settings ect can i still use back up with a USB upgrade or is it a start from scratch job ?
thanks
Use ViX ImageManager and do an online flash (the default setting is to backup settings before flashing but if not sure use vix backupManager to backup your settings)
So in ImageManager download the latest image (yellow button) and choose ViX (you can also download OPenPli/OpenATV but they would need a fresh setup) and flash the selected image (blue button) - and I would choose one of the other 3 multiboot slots so that your existing image is still there if you want to return to it)
After flashing it should find your backup settings on your HDD/usb stick) and give you the option of restoreing - choose Yes (and to plugins) and it will reboot and you should be back working on new image version
Last edited by twol; 18-01-20 at 12:55.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
abu baniaz (18-01-20)
The advice above pretty much covers everything, but to reword for benefit of others who will ask the same thing: Flashing an image is one thing. Creating settings/plugin backups is another thing. Restoring settings/plugin backups is yet another thing.
Create a settings backup: (this is with regards to those on your current image)
If you intend to flash by USB, you will have to manually create a settings backup
When you flash by Image Manager or perform a software update, the default is to create a settings backup.
Flash an image
You can using a USB flash drive. Some people like doing things the hard way.
You can flash using Image Manager. This is the simplest thing to do. You also get the option of selecting which slot to flash onto for receivers with hardware multiboot
Restoring settings backup:
After you have flashed an Image, you will be asked if you want to restore the settings backups and plugins you had installed. Say yes unless you want to manually set things.
Note: CrossEPG is not pre-installed in 5.3 images. So you will have to manually install that.
Guide and videos on link below (as well as my signature). Also covered in the ViX manual
https://www.world-of-satellite.com/s...-and-Restores/
Thank you i dont think i have image manager on mine were can this be found please?
i try the update and it says no updates
Menu/Setup/ViX ————> ImageManager
HD51 is a multiboot receiver with 4 image slots - you can have a different image in each slot
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Oh yes found it great updating
Don’t think I will mess with the slots lol
Thanks again everyone