Results 1 to 8 of 8
  1. #1
    Junior Member

    Join Date
    Dec 2019
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Box crashes when using EPG

    Hello,

    The box crashes sometimes when I'm looking at the EPG. It gives a log and suggests posting the log up. Apologies in advance if I've missing something obvious, I'm new to this all.

    I have flashed the box (just downloaded the latest version of Vix, put it on a USB stick then put it in the back of the box. Sorry I'm not sure if that means with settings restore or without settings restore. The issue is still there after flashing.

    The contents of the log are posted below.

    Any ideas what the problem is or what I can do?

    Many thanks,

    Phil.






    OpenViX Enigma2 Crashlog

    Crashdate = Tue Dec 17 21:56:54 2019

    Creator = OpenViX
    Version = 5.3
    Build = 013
    Dev = 001
    Type = release
    Machine = osmega
    URL = http://www.world-of-satellite.com
    Compiled = Dec 14 2019
    Skin = ViX-Night-HD/skin.xml
    Component = Enigma2

    Kernel CMDline = console=ttyS0,115200 ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs
    Nim Sockets = NIM Socket 0:
    Type: DVB-S2
    Name: Broadcom BCM73XX
    Frontend_Device: 0
    I2C_Device: 255
    Has_Outputs: no
    NIM Socket 1:
    Type: DVB-S2
    Name: Broadcom BCM73XX
    Frontend_Device: 1
    I2C_Device: 255
    Has_Outputs: no
    NIM Socket 2:
    Type: DVB-T2
    Name: FTM-4862 (Availink AVL6862)
    Frontend_Device: 2
    I2C_Device: 3
    Has_Outputs: no
    Mode 0: DVB-S
    Mode 1: DVB-T
    Mode 2: DVB-C


    ache] abort non avail schedule reading
    < 4404.498> [eEPGCache] abort non avail schedule other reading
    < 4404.498> [eEPGCache] abort non avail virgin nownext reading
    < 4404.498> [eEPGCache] abort non avail virgin schedule reading
    < 4404.498> [eEPGCache] abort non avail netmed schedule reading
    < 4404.499> [eEPGCache] abort non avail netmed schedule other reading
    < 4404.499> [eEPGCache] abort non avail viasat reading
    < 4404.727> [eEPGCache] nownext finished(1576619697)
    < 4424.923> [Navigation] playing 1:0:19:1E46:809:2:11A0000:0:0:0:
    < 4424.924> [eDVBCAService] free slot 0 demux 0 for service 1:0:19:52D0:814:2:11A0000:0:0:0:
    < 4424.924> [eDVBCAService] free service 1:0:19:52D0:814:2:11A0000:0:0:0:
    < 4424.953> [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
    < 4424.953> [eDVBPCR0] DEMUX_STOP ok
    < 4424.953> [eDVBPCR0] destroy
    < 4424.953> [eDVBVideo0] DEMUX_STOP ok
    < 4424.955> [eDVBVideo0] VIDEO_STOP ok
    < 4424.957> [eDVBVideo0] destroy
    < 4424.957> [eDVBAudio0] AUDIO_STOP ok
    < 4424.963> [eDVBAudio0] DEMUX_STOP ok
    < 4424.963> [eDVBAudio0] AUDIO_CONTINUE ok
    < 4424.965> [eDVBAudio0] destroy
    < 4424.965> [eDVBText0] DEMUX_STOP ok
    < 4424.966> [eDVBText0] destroy
    < 4424.969> [eDVBResourceManager] start release channel timer
    < 4425.013> [Notifications] RemovePopup, id = ZapError
    < 4425.013> [eDVBLocalTimerHandler] remove channel 0x1547f18
    < 4425.013> [eEPGCache] remove channel 0x1547f18
    < 4425.014> [eEPGCache] abort caching events !!
    < 4425.017> [eDVBResourceManager] allocate channel.. 0809:0002
    < 4425.019> [eDVBFrontend0] tune
    < 4425.019> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
    < 4425.019> [eDVBFrontend0] prepare_sat System 0 Freq 10964250 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
    < 4425.019> [eDVBFrontend0] tuning to 1214 mhz
    < 4425.019> [eDVBChannel] OURSTATE: tuning
    < 4425.019> [eDVBServicePMTHandler] allocate Channel: res 0
    < 4425.019> [eDVBCIInterfaces] addPMTHandler 1:0:19:1E46:809:2:11A0000:0:0:0:
    < 4425.019> [eDVBChannel] getDemux cap=00
    < 4425.019> [eDVBResourceManager] allocate demux cap=00
    < 4425.019> [eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=0
    < 4425.019> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.032> [eDVBFrontend0] invalidate current switch params
    < 4425.032> [eDVBFrontend0] setVoltage 2
    < 4425.032> [eDVBFrontend0] sleep 10ms
    < 4425.042> [eDVBFrontend0] set sequence pos 3
    < 4425.042> [eDVBFrontend0] update current switch params
    < 4425.042> [eDVBFrontend0] startTuneTimeout 5000
    < 4425.042> [eDVBFrontend0] setFrontend 1
    < 4425.042> [eDVBFrontend0] setting frontend
    < 4425.042> [eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
    < 4425.043> [eDVBFrontend0] sleep 500ms
    < 4425.144> [eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
    < 4425.144> [eDVBChannel] OURSTATE: ok
    < 4425.144> [eDVBLocalTimerHandler] channel 0x1547f18 running
    < 4425.144> [eDVBChannel] getDemux cap=00
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBSectionReader] DMX_SET_FILTER pid=20
    < 4425.144> [eEPGCache] channel 0x1547f18 running
    < 4425.144> [eDVBChannel] getDemux cap=00
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.145> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.145> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.145> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.145> [eDVBResourceManager] stop release channel timer
    < 4425.145> [eDVBChannel] getDemux cap=01
    < 4425.145> [eDVBResourceManager] allocate demux cap=01
    < 4425.145> [eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
    < 4425.145> [eDVBServicePMTHandler] ok ... now we start!!
    < 4425.145> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.145> [eEPGCache] next update in 2 sec
    < 4425.145> [eDVBSectionReader] DMX_SET_FILTER pid=0
    < 4425.204> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.204> [eDVBSectionReader] DMX_SET_FILTER pid=18
    < 4425.206> [Notifications] RemovePopup, id = ZapError
    < 4425.207> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.207> [eDVBSectionReader] DMX_SET_FILTER pid=0
    < 4425.208> [eDVBServicePMTHandler] PATready
    < 4425.208> [eDVBServicePMTHandler] use pmtpid 0101 for service_id 1e46
    < 4425.208> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.208> [eDVBSectionReader] DMX_SET_FILTER pid=257
    < 4425.208> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.209> [eDVBSectionReader] DMX_SET_FILTER pid=0
    < 4425.389> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.389> [eDVBSectionReader] DMX_SET_FILTER pid=267
    < 4425.389> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.389> [eDVBSectionReader] DMX_SET_FILTER pid=17
    < 4425.390> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
    < 4425.391> [Config] getResolvedKey config.autolanguage.audio_autoselect2 empty variable.
    < 4425.391> [Config] getResolvedKey config.autolanguage.audio_autoselect3 empty variable.
    < 4425.392> [Config] getResolvedKey config.autolanguage.audio_autoselect4 empty variable.
    < 4425.392> [Config] getResolvedKey config.autolanguage.subtitle_autoselect1 empty variable.
    < 4425.393> [Config] getResolvedKey config.autolanguage.subtitle_autoselect2 empty variable.
    < 4425.393> [Config] getResolvedKey config.autolanguage.subtitle_autoselect3 empty variable.
    < 4425.393> [Config] getResolvedKey config.autolanguage.subtitle_autoselect4 empty variable.
    < 4425.394> [eDVBServicePlay] have 1 video stream(s) (0901), and 2 audio stream(s) (0903, 0902), and the pcr pid is 0901, and the text pid is 0904
    < 4425.394> [eDVBChannel] getDemux cap=01
    < 4425.400> [eTSMPEGDecoder] decoder state: play, vpid=0901, apid=0902
    < 4425.400> [eDVBPCR0] DMX_SET_PES_FILTER pid=0x0901 ok
    < 4425.400> [eDVBPCR0] DEMUX_START ok
    < 4425.401> [eDVBAudio0] DMX_SET_PES_FILTER pid=0x0902 ok
    < 4425.401> [eDVBAudio0] DEMUX_START ok
    < 4425.401> [eDVBAudio0] AUDIO_SET_BYPASS bypass=0 ok
    < 4425.401> [eDVBAudio0] AUDIO_PAUSE ok
    < 4425.401> [eDVBAudio0] AUDIO_PLAY ok
    < 4425.403> [eDVBVideo] Video Device: /dev/dvb/adapter0/video0
    < 4425.403> [eDVBVideo] demux device: /dev/dvb/adapter0/demux0
    < 4425.403> [eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
    < 4425.403> [eDVBVideo0] DMX_SET_PES_FILTER pid=0x0901 ok
    < 4425.403> [eDVBVideo0] DEMUX_START ok
    < 4425.403> [eDVBVideo0] VIDEO_FREEZE ok
    < 4425.403> [eDVBVideo0] VIDEO_PLAY ok
    < 4425.410> [eDVBText0] DMX_SET_PES_FILTER pid=0x0904 ok
    < 4425.410> [eDVBText0] DEMUX_START ok
    < 4425.415> [eDVBVideo0] VIDEO_SLOWMOTION 0 ok
    < 4425.420> [eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
    < 4425.426> [eDVBVideo0] VIDEO_CONTINUE ok
    < 4425.427> [eDVBAudio0] AUDIO_CONTINUE ok
    < 4425.427> [eDVBTeletextParser] Starting!
    < 4425.427> [eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
    < 4425.427> [eDVBPESReader] Created. Opening demux
    < 4425.427> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.427> [eDVBTeletextParser] created teletext subtitle PES reader!
    < 4425.427> [eDVBPESReader] Created. Opening demux
    < 4425.427> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.427> [eDVBTeletextParser] starting PES reader on pid=0904
    < 4425.427> [eDVBPESReader] DMX_SET_PES_FILTER pid=0904
    < 4425.440> [Config] getResolvedKey config.autolanguage.audio_autoselect2 empty variable.
    < 4425.440> [Config] getResolvedKey config.autolanguage.audio_autoselect3 empty variable.
    < 4425.441> [Config] getResolvedKey config.autolanguage.audio_autoselect4 empty variable.
    < 4425.441> [Config] getResolvedKey config.autolanguage.subtitle_autoselect1 empty variable.
    < 4425.442> [Config] getResolvedKey config.autolanguage.subtitle_autoselect2 empty variable.
    < 4425.442> [Config] getResolvedKey config.autolanguage.subtitle_autoselect3 empty variable.
    < 4425.443> [Config] getResolvedKey config.autolanguage.subtitle_autoselect4 empty variable.
    < 4425.476> [eDVBCAService] new service 1:0:19:1E46:809:2:11A0000:0:0:0:
    < 4425.476> [eDVBCAService] add demux 0 to slot 0 service 1:0:19:1E46:809:2:11A0000:0:0:0:
    < 4425.476> [eDVBCIInterfaces] gotPMT
    < 4425.476> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.476> [eDVBSectionReader] DMX_SET_FILTER pid=257
    < 4425.595> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.595> [eDVBSectionReader] DMX_SET_FILTER pid=258
    < 4425.794> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.794> [eDVBSectionReader] DMX_SET_FILTER pid=259
    < 4425.993> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4425.993> [eDVBSectionReader] DMX_SET_FILTER pid=260
    < 4426.191> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4426.191> [eDVBSectionReader] DMX_SET_FILTER pid=261
    < 4426.321> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4426.321> [eDVBSectionReader] DMX_SET_FILTER pid=18
    < 4426.398> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4426.398> [eDVBSectionReader] DMX_SET_FILTER pid=256
    < 4426.597> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4426.597> [eDVBSectionReader] DMX_SET_FILTER pid=262
    < 4426.795> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    < 4426.795> [eDVBSectionReader] DMX_SET_FILTER pid=266
    < 4427.042> [eDVBServicePMTHandler] sdt update done!
    < 4427.152> [eEPGCache] start caching events(1576619720)
    < 4427.152> [eDVBSectionReader] DMX_SET_FILTER pid=3842
    < 4427.152> [eDVBSectionReader] DMX_SET_FILTER pid=3003
    < 4427.152> [eDVBSectionReader] DMX_SET_FILTER pid=18
    < 4427.153> [eDVBSectionReader] DMX_SET_FILTER pid=18
    < 4427.153> [eDVBSectionReader] DMX_SET_FILTER pid=18
    < 4427.154> [eDVBSectionReader] DMX_SET_FILTER pid=700
    < 4427.154> [eDVBSectionReader] DMX_SET_FILTER pid=700
    < 4427.154> [eDVBSectionReader] DMX_SET_FILTER pid=5000
    < 4427.154> [eDVBSectionReader] DMX_SET_FILTER pid=5000
    < 4427.155> [huffman] read.. '/usr/share/enigma2/otv_011a0000_0002_0809.dict'
    < 4427.155> [eEPGCache] abort non avail OpenTV EIT reading
    < 4427.155> [eDVBSectionReader] DMX_SET_FILTER pid=57
    < 4427.230> [Task] job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
    < 4429.215> [eDVBLocalTimerHandler] diff is -1
    < 4429.215> [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
    < 4429.215> [eDVBLocalTimerHandler] set RTC Time
    < 4429.216> [eDVBLocalTimerHandler] update RTC
    < 4429.216> [eDVBLocalTimerHandler] time update to 21:55:21
    < 4429.216> [eDVBLocalTimerHandler] m_time_difference is -1
    < 4429.216> [eDVBLocalTimerHandler] slewing Linux Time by -01 seconds
    < 4429.216> [eDVBChannel] getDemux cap=00
    < 4434.155> [eEPGCache] abort non avail schedule reading
    < 4434.156> [eEPGCache] abort non avail schedule other reading
    < 4434.156> [eEPGCache] abort non avail virgin nownext reading
    < 4434.156> [eEPGCache] abort non avail virgin schedule reading
    < 4434.156> [eEPGCache] abort non avail netmed schedule reading
    < 4434.157> [eEPGCache] abort non avail netmed schedule other reading
    < 4434.157> [eEPGCache] abort non avail viasat reading
    < 4434.258> [eEPGCache] nownext finished(1576619727)
    < 4457.687> [eDVBDB] ---- opening lame channel db
    < 4457.687> [eDVBDB] reading services (version 4)
    < 4457.704> [eDVBDB] loaded 63 channels/transponders and 867 services
    < 4457.707> [eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv
    < 4457.707> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ec__good_channels.tv
    < 4457.708> [eDVBDB] 20 entries in Bouquet userbouquet.ec__good_channels.tv
    < 4457.708> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ec__good_channels_+1.tv
    < 4457.708> [eDVBDB] 6 entries in Bouquet userbouquet.ec__good_channels_+1.tv
    < 4457.708> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ec_spare_has_guide.tv
    < 4457.708> [eDVBDB] 1 entries in Bouquet userbouquet.ec_spare_has_guide.tv
    < 4457.708> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
    < 4457.708> [eDVBDB] 0 entries in Bouquet userbouquet.favourites.tv
    < 4457.709> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
    < 4457.709> [eDVBDB] 76 entries in Bouquet userbouquet.LastScanned.tv
    < 4457.709> [eDVBDB] 5 entries in Bouquet bouquets.tv
    < 4457.710> [eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio
    < 4457.710> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio
    < 4457.710> [eDVBDB] 0 entries in Bouquet userbouquet.favourites.radio
    < 4457.710> [eDVBDB] 1 entries in Bouquet bouquets.radio
    < 4457.710> [eDVBDB] Renumbering...
    < 4457.756> [NimManager] Reading satellites.xml
    < 4457.944> [NimManager] Reading cables.xml
    < 4458.188> [NimManager] Reading terrestrial.xml
    < 4458.497> [Skin] processing screen MessageBox:
    < 4458.522> [GUISkin] warning, skin is missing element icon in <class 'Screens.MessageBox.MessageBox'>(Settings have been updated by E-Channelizer.)
    < 4458.522> [Pixmap] setPixmapNum(1) failed! defined pixmaps: []
    < 4458.523> [MessageBox] Timeout set to 5 seconds.
    < 4458.526> [Skin] processing screen MessageBox_summary:
    < 4462.836> [eInputDeviceInit] 1 160 1
    < 4462.837> [InfoBarGenerics] KEY: 352 OK
    < 4462.838> [ActionMap] Keymap 'MsgBoxActions' -> Action = 'ok'.
    < 4463.028> [eInputDeviceInit] 0 160 1
    < 4463.029> [InfoBarGenerics] KEY: 352 OK
    < 4521.380> [eInputDeviceInit] 1 16d 1
    < 4521.381> [InfoBarGenerics] KEY: 365
    < 4521.608> [eInputDeviceInit] 0 16d 1
    < 4521.609> [InfoBarGenerics] KEY: 365
    < 4521.625> [ActionMap] Keymap 'InfobarEPGActions' -> Action = 'EPGPressed'.
    < 4521.678> [EPGSelection] EPG_TYPE_GRAPH
    < 4521.703> [Skin] processing screen GraphicalEPGPIG:
    < 4521.757> [GUISkin] warning, skin is missing element number in <class 'Screens.EpgSelection.EPGSelection'>
    < 4521.757> [GUISkin] warning, skin is missing element jump in <class 'Screens.EpgSelection.EPGSelection'>
    < 4521.760> [GUISkin] warning, skin is missing element primetime in <class 'Screens.EpgSelection.EPGSelection'>
    < 4521.761> [GUISkin] warning, skin is missing element timeline2 in <class 'Screens.EpgSelection.EPGSelection'>
    < 4521.761> [GUISkin] warning, skin is missing element timeline3 in <class 'Screens.EpgSelection.EPGSelection'>
    < 4521.762> [GUISkin] warning, skin is missing element timeline0 in <class 'Screens.EpgSelection.EPGSelection'>
    < 4521.762> [GUISkin] warning, skin is missing element timeline1 in <class 'Screens.EpgSelection.EPGSelection'>
    < 4521.762> [GUISkin] warning, skin is missing element timeline4 in <class 'Screens.EpgSelection.EPGSelection'>
    < 4521.763> [GUISkin] warning, skin is missing element timeline5 in <class 'Screens.EpgSelection.EPGSelection'>
    < 4521.765> [GUISkin] warning, skin is missing element change_bouquet in <class 'Screens.EpgSelection.EPGSelection'>
    < 4521.773> [GUISkin] warning, skin is missing element page in <class 'Screens.EpgSelection.EPGSelection'>
    < 4521.869> [Skin] processing screen SimpleSummary:
    < 4521.891> Traceback (most recent call last):
    < 4521.891> File "/usr/lib/enigma2/python/Screens/EpgSelection.py", line 441, in loadEPGData
    < 4521.891> File "/usr/lib/enigma2/python/Screens/EpgSelection.py", line 433, in populateBouquetList
    < 4521.892> File "/usr/lib/enigma2/python/Components/EpgList.py", line 1919, in fillBouquetList
    < 4521.892> File "/usr/lib/enigma2/python/Components/EpgList.py", line 1733, in getCurrentBouquetService
    < 4521.892> TypeError: 'NoneType' object has no attribute '__getitem__'
    < 4521.892> [ePyObject] (CallObject(<bound method EPGSelection.loadEPGData of <class 'Screens.EpgSelection.EPGSelection'>>,()) failed)


    dmesg

  2. #2
    Moderator abu baniaz's Avatar

    Join Date
    Sep 2010
    Location
    East London
    Posts
    19,709
    Thanks
    5,109
    Thanked 7,764 Times in 5,220 Posts
    Did you install any skins or customisations?

  3. #3
    ViX Beta Tester birdman's Avatar

    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    5,396
    Thanks
    130
    Thanked 1,159 Times in 924 Posts
    Quote Originally Posted by philteare View Post
    The box crashes sometimes when I'm looking at the EPG. It gives a log and suggests posting the log up. Apologies in advance if I've missing something obvious, I'm new to this all.

    I have flashed the box (just downloaded the latest version of Vix, put it on a USB stick then put it in the back of the box. Sorry I'm not sure if that means with settings restore or without settings restore. The issue is still there after flashing.
    < 4521.892> File "/usr/lib/enigma2/python/Components/EpgList.py", line 1733, in getCurrentBouquetService
    < 4521.892> TypeError: 'NoneType' object has no attribute '__getitem__'
    < 4521.892> [ePyObject] (CallObject(<bound method EPGSelection.loadEPGData of <class 'Screens.EpgSelection.EPGSelection'>>,()) failed)
    That seems to indicate that you have no currently-selected channel/service. Which sees a little odd.
    Try changing the channel your looking at without using the EPG (so use the Prog+/Prog- buttons).
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  4. #4
    Moderator abu baniaz's Avatar

    Join Date
    Sep 2010
    Location
    East London
    Posts
    19,709
    Thanks
    5,109
    Thanked 7,764 Times in 5,220 Posts
    Note to self:
    Loss of focus

    Please ignore this post of mine. I need to refer to this issue in another thread on the Dev side of forum.

  5. #5
    Junior Member

    Join Date
    Dec 2019
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by abu baniaz View Post
    Did you install any skins or customisations?
    No I've no skins or customisations. The box had previously crashed, so I just downloaded the latest OpenViX version from http://www.openvix.co.uk/index.php/d...ision-os-mega/ and flashed the box with that. That's all I've put on it. thanks.

  6. #6
    Junior Member

    Join Date
    Dec 2019
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by birdman View Post
    That seems to indicate that you have no currently-selected channel/service. Which sees a little odd.
    Try changing the channel your looking at without using the EPG (so use the Prog+/Prog- buttons).
    Thank you. I'll experiment with making sure I've a working channel selected first.

  7. #7
    Moderator abu baniaz's Avatar

    Join Date
    Sep 2010
    Location
    East London
    Posts
    19,709
    Thanks
    5,109
    Thanked 7,764 Times in 5,220 Posts
    You have hit a bug I need to mention in another thread but it is hard to replicate.

    Can you list the exact steps to produce it please?

    As in above post by original birdman, invoking EPG after selecting a service/bouquet will be fine.

  8. #8
    Junior Member

    Join Date
    Dec 2019
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by abu baniaz View Post
    You have hit a bug I need to mention in another thread but it is hard to replicate.

    Can you list the exact steps to produce it please?

    As in above post by original birdman, invoking EPG after selecting a service/bouquet will be fine.
    I had just updated the channels via e-channeliser. I has it on BBC news, then pressed EPG button and it crashed straight away.

    Thank you!

    Phil.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.