have problems that box locks when recording.When trying to do a controle HDD ik get following msg as in attach.
How do I start fsck manually ? In telenet it is not working or I give wrong commando:
have problems that box locks when recording.When trying to do a controle HDD ik get following msg as in attach.
How do I start fsck manually ? In telenet it is not working or I give wrong commando:
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
Did you recheck where your hdd is and is set correctly.
is reachable and mounted as HDD and working fine further.Just when recording several channels the box sometimes locks an needs to have a hard reboot. Think is the problem on HDD. When I give fsck in telnet nothing happens (unknown command)
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
I've got fsck by default (nothing else to install).
Code:root@et10000:~# which fsck /sbin/fsck
See this thread for the command for checking for errors using telnet/putty (remember to disable timeshift if necessary first then reboot and then try the telnet/putty commands).
just tested with link and repaired the HDD structure with :
init 4
umount /dev/sda1
e2fsck -c -f /dev/sda1
Then init 3 and remounted HDD in openvix.
THX to all for help.Hopefully now recordings will go good.
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E