Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 10 of 10

Thread: Zgemma 9s Update to 5.3.002

  1. #1

    Title
    Member
    Join Date
    Mar 2017
    Location
    North West
    Posts
    45
    Thanks
    13
    Thanked 7 Times in 6 Posts

    Zgemma 9s Update to 5.3.002

    I am currently on OpenVix 5.2.045 and decided to upgrade to release 5.3.002
    I have download the release and placed in ImageManager and slected Flash. It progresses to flash the image but at the point when Flashing UBI immage it displays an error "error flashing rootfs. system wont boot please flash backup reboot in 60 secs"

    I am new to the Zgemma 9s can anyone please advise how to progress this further
    Any assistance would be appeciated

  2. #2
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    I am assuming you are not using the SD card for the root??
    Turn on debug logs menu/setup/system/logs/settings turn on debug and change log to usb or HDD (not flash) and reboot system
    After ImageManager post debug log here
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  3. #3

    Title
    Member
    Join Date
    Mar 2017
    Location
    North West
    Posts
    45
    Thanks
    13
    Thanked 7 Times in 6 Posts
    Quote Originally Posted by twol View Post
    I am assuming you are not using the SD card for the root??
    Turn on debug logs menu/setup/system/logs/settings turn on debug and change log to usb or HDD (not flash) and reboot system
    After ImageManager post debug log here
    Thank you much appreciated

    I have attached the log file prepared as you advised
    Attached Files Attached Files

  4. #4
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    That log shows an issue with the web interface but no trace of ImageManager being called so either wrong log or there is another issue,
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  5. #5
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    OK - my error, issued correction.
    So you can try this: either usb flash or
    Connect via putty and enter:
    init 4 (space between)
    Connect via filezilla:
    rename ImageManager.pyo to xImageManager.pyo in /usr/lib/enigma2/python/Plugins/SystemPlugins/ViX
    and then copy the attached ImageManager.py to /usr/lib/enigma2/python/Plugins/SystemPlugins/ViX
    Back to Putty:
    Init 6 (space between)

    Then try flashing again with ImageManager
    If that doesn't work due to other requirements then you will have to usb flash.
    Attached Files Attached Files
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  6. #6

    Title
    Member
    Join Date
    Mar 2017
    Location
    North West
    Posts
    45
    Thanks
    13
    Thanked 7 Times in 6 Posts
    Hi towl

    I have reviewd the debug log and advise that lthe emMMC slote is used for the image root
    After conducting the process again l have attached what l think is the log file requested
    Attached Files Attached Files

  7. #7
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    ....... read post #5
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  8. The Following User Says Thank You to twol For This Useful Post:

    ross_37 (19-09-19)

  9. #8

    Title
    Member
    Join Date
    Mar 2017
    Location
    North West
    Posts
    45
    Thanks
    13
    Thanked 7 Times in 6 Posts
    Hi twol

    I can confirm the issue is now resolved with your help with out using USB
    I have been able to upgrade to 5.3.002 but not sure why the file was not there originally
    However l am happy to have been able to ugrade to 5.3.002 with your help was much asppreciated and hopefully to outher forum member

    Thanks once again

  10. #9

    Title
    Member
    Join Date
    Mar 2017
    Location
    North West
    Posts
    45
    Thanks
    13
    Thanked 7 Times in 6 Posts
    Hi twol
    I have subsequently tried my plugin e2m3u2bouquet and found its not working following the upgrade to 5.3.002
    I Initially reinstalled the plugin but that not resolved the it
    Could you advise from the attached log what may be causing the problem
    Attached Files Attached Files

  11. #10
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    1. timeshift is having space issues - make sure that you have a hdd mounted as HDD (check in ViX mountmanager)
    2. cannot see the e2m3u2bouquet being run, but beware that many IPTV providers have major issues with Xstream codes at the moment, so your IPTV services maybe failing - nothing to do with ViX
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  12. The Following User Says Thank You to twol For This Useful Post:

    ross_37 (24-09-19)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.