Octagon receiver SF4008
ENIGMA2-Plugin-Sofcamuri-Oscam. EMU-11392_OPENVIX_ARMV7AHF-VFP-neon. Ipk.
On every reboot, I have to click Restart-Softcam manager.
Do not remain EMU Oscam activated permanently. What do I have to do?
Thank you very much.
Octagon receiver SF4008
ENIGMA2-Plugin-Sofcamuri-Oscam. EMU-11392_OPENVIX_ARMV7AHF-VFP-neon. Ipk.
On every reboot, I have to click Restart-Softcam manager.
Do not remain EMU Oscam activated permanently. What do I have to do?
Thank you very much.
Blue button, Softcam Manager, Blue button (enable at startup)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
As @twol says, you need to enable auto startup in softcam manager.
Blue button > Softcam manager > Blue button
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
What have you set in softcam manager?
Where did you get the softcam from??
If you do not answer, solution will be difficult
1. download Oscam from the ViX feeds
2. where have you put your Oscam files?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
There is a memory limit size on Vix. The one you have probably has libcrypto built in. Uninstall your one and install thr one from thr vix plugin server.
What have you set in softcam manager. You have been asked this several times. Post a screenshot.
IMG_20190824_233359.jpg
Do not remain EMU Oscam activated permanently. What do I have to do?
uninstall your one.
install the one on plugin server
make sure it has a tick for autostart (press the blue button)
I removed Enigma2-plugin-Sofcamuri-Oscam. EMU-11392_OPENVIX_ARMV7AHF-VFP-neon. Ipk.
Menu/Plugins/Dream-Explorer/Download plugins/softcams-Oscam-EMU (1.20 + svn11539-r797)
To the Blue/Softcam Manager/Start button
I have the message:
No configured file was found in etc/tuxbox/config. Please first date configure Oscam
Thats correct. You need to put your config files in there via ftp client.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
When you deinstalled the ipk it may have removed the oscam files.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K