Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 7 of 7

Thread: Tecnomate Diseqc2

  1. #1

    Title
    Senior Member
    Join Date
    Mar 2012
    Posts
    112
    Thanks
    24
    Thanked 14 Times in 12 Posts

    Tecnomate Diseqc2

    Hi world of sat,
    I'm after some help. You sell a technomate tm-25 DISCqC 2 way switch. Would this work in my Solo2 with 3 seperate dishes ... Ie. Tuner A 28.2 Tuner B 19.2 and 13. If so can you please tell me how to configure Tuner B as I am thinking of buying one.
    How would you scan Tuner I have always used simple and swaped cable and changed tuner configuration in autoboque ?
    Any help appreciated

  2. #2
    world-of-satellite.co.uk's Avatar
    Title
    Forum Sponsor
    Join Date
    Jul 2010
    Posts
    1,231
    Thanks
    191
    Thanked 1,308 Times in 473 Posts
    If you have 3 separate dishes / lnb's you need at least a 3 way switch: https://www.world-of-satellite.co.uk...-diseqc-switch

    Set tuner B to Diseqc A/B/C/D, configure A, B & C and set D to nothing connected.

    Official Sponsor of the OpenViX Team
    Official Distributor of Formuler products, GiGaBlue, Octagon,
    Technomate, Tiviar, VU+, Xtrend and many more...
    Secure online ordering - Paypal and all major cards accepted - Order online 7 days a week!
    PRICE MATCH PROMISE - WE'LL TRY TO MATCH ANY UK PRICE*
    *SEEN ANY PRODUCT CHEAPER? CONTACT US AND WE’LL TRY TO MATCH LIKE FOR LIKE!

  3. #3
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts
    Once setup you can scan manually or use Autobouquetsmaker.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  4. #4

    Title
    Senior Member
    Join Date
    Mar 2012
    Posts
    112
    Thanks
    24
    Thanked 14 Times in 12 Posts
    Thanks for heads up !please didn't order that .
    Why a 3 way switch for 2 diff sat on tuner b
    Solo2 vu

  5. #5
    world-of-satellite.co.uk's Avatar
    Title
    Forum Sponsor
    Join Date
    Jul 2010
    Posts
    1,231
    Thanks
    191
    Thanked 1,308 Times in 473 Posts
    Sorry mis-read the Tuner A part 2 way would be sufficient. The GT sat switch can be used as a 2 way.

    If you have a spare output on the Astra 28.2 LNB you would feed the 3 way switch also, so you could watch and record Astra 28.2 across both tuners.

    Official Sponsor of the OpenViX Team
    Official Distributor of Formuler products, GiGaBlue, Octagon,
    Technomate, Tiviar, VU+, Xtrend and many more...
    Secure online ordering - Paypal and all major cards accepted - Order online 7 days a week!
    PRICE MATCH PROMISE - WE'LL TRY TO MATCH ANY UK PRICE*
    *SEEN ANY PRODUCT CHEAPER? CONTACT US AND WE’LL TRY TO MATCH LIKE FOR LIKE!

  6. #6

    Title
    Senior Member
    Join Date
    Mar 2012
    Posts
    112
    Thanks
    24
    Thanked 14 Times in 12 Posts
    How would I set up tuner b with 19.2 and 13 on same tuner using autoboque ? Using a 2 way switch ? Simple single basic lmb zone 2 dishs

  7. #7
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,335
    Thanks
    6,421
    Thanked 9,146 Times in 6,224 Posts

    Tecnomate Diseqc2

    i presume you are talking about the software side. just set as diseqc ab, leave automatic, it will find which LNB is in which port.

    The receiver will use whichever tuner is configured for the satellite it needs.

  8. The Following User Says Thank You to abu baniaz For This Useful Post:

    loopy123 (22-08-19)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.