Client Mode will only stream FTA

[Willo3092]

ViX 5.2 will only stream FTA channels to the client box. (on both satellite and cable).
Anything not FTA is just a blank screen although the master box is showing that the appropriate tuner is selected and in use.
I've done a bit of experimenting and putting ViX 5.1 on the master box cures it.
I'm not sure if this is by design or a bug? .... or if it's a client mode problem or oscam (using oscam latest on 5.2 btw)
The same symptoms also exist in ATV with the channels importer plugin so not a problem exclusive to ViX.
I've tried searching the changelogs but can't find anything. Anyone any ideas?

[Andy_Hazza]

What receiver? Recent driver changes to that receiver?


Sent from my iPhone using Tapatalk

[twol]

ViX 5.2 will only stream FTA channels to the client box. (on both satellite and cable).
Anything not FTA is just a blank screen although the master box is showing that the appropriate tuner is selected and in use.
I've done a bit of experimenting and putting ViX 5.1 on the master box cures it.
I'm not sure if this is by design or a bug? .... or if it's a client mode problem or oscam (using oscam latest on 5.2 btw)
The same symptoms also exist in ATV with the channels importer plugin so not a problem exclusive to ViX.
I've tried searching the changelogs but can't find anything. Anyone any ideas?

5.2 version????
I stream 27.5W to my h9 quite happily - so is this a recent version issue or??
maybe you need to be more explicit what for example doesn't stream??

[bellejt]

as Andy asks : witch box , softcam, CI module etc

[Willo3092]

I'm using 5.2.045 and have tried it using Vu+ Ultimo 4K, Vu+ Duo 4k and Xtrend ET8500 as master box and oscam-latest.
The only channels that will stream are FTA on VM cable, Sky UK 28.2, Freesat 28.2, Sky DE 19.2 and Hotbird 13.0.
Anything decrypted by oscam does not stream although they clear fine on the master box.
I've only tried putting ViX 5.1.033 on the Xtrend ET8500 as master and everything then works as it should.
It makes no difference what OS is on the client box (tried on Octagon SF8 and Zgemma H7 and Octagon SF4008) No encrypted channels clear unless the master is running ViX 5.1.
I am also using the same oscam config files on the master box using both firmware versions.

[cactikid]

Working here on 5.2.040 on solo2 and using tm nano se and oscam latest viewing on 19.2 and 13.

[Willo3092]

Just tried again on my SF8008 running ViX 5.2.041 (plain vix, no cams installed or tuners setup) - will stream anything from the ET8500 running ViX 5.1.033 - only FTA from my Ultimo 4K and Duo 4k on ViX 5.2.045.

[twol]

So as said I am streaming from a box that is at 5.2.045+ and that works for me with an encrypted service.
So what are you trying to stream??

[cactikid]

Sometimes if i have issues due to old images i reflash to a later image and set box up again as client no cams or tuners.Unsure if samba is needed for client mode.

[twol]

Sometimes if i have issues due to old images i reflash to a later image and set box up again as client no cams or tuners.Unsure if samba is needed for client mode.

Client mode doesn‘t need samba, it streams across the lan ... very basic but very efficient

[bellejt]

here vu+ duo 2 as master latest version image with 4 tuners available running latest oscam and streaming client mode on slaveboxes works fine to other duo2 and technomate.No matter if FTA or coded channels.

[Willo3092]

So as said I am streaming from a box that is at 5.2.045+ and that works for me with an encrypted service.
So what are you trying to stream??

The client box is OpenViX 5.2.045 on an Octagon SF8008 and will happily stream anything from a UK cable service, encrypted or not, if the master is running OpenViX 5.1.033 with oscam-latest installed.
If I put OpenViX 5.2.045 on the master box using the same oscam configs, the client box can only stream FTA channels although the master box is allocating the correct tuner to the client.
It seems that oscam is not decrypting the streaming service.

[bellejt]

strange cos here same oscam decodes 3 streams at the time.So I am watching on 3 boxes 3 differant coded channels.Setup from oscam ?

[Willo3092]

I'm using the same oscam settings and config files on the master box whether using ViX 5.1 or ViX 5.2.
I'm not sure if oscam-latest are different versions on 5.1 & 5.2 though.

[cactikid]

Might be different when i had issues 11517 was just out and used that then,a few more versions came out but as its only streaming from a working box is strange,how long did you leave it on a channel?