Page 1 of 2 12 LastLast
Results 1 to 15 of 18
  1. #1
    Junior Member

    Join Date
    Mar 2017
    Location
    North West
    Posts
    5
    Thanks
    4
    Thanked 3 Times in 2 Posts

    Zgemma H9S OpenVix Oscamymod 18-56

    Hi
    I am trying to setup the BBC Back sat on 27.5w on my Zgemma H9S, l am looking for the plugin -oscam-ymodv18-56_openvix_all.ipk to install

    Can anyone assist me with the location where l might find the plugin

  2. The Following User Says Thank You to ross_37 For This Useful Post:

    lespat (31-07-19)

  3. #2
    ViX Beta Tester twol's Avatar

    Join Date
    Apr 2012
    Posts
    4,976
    Thanks
    648
    Thanked 1,669 Times in 1,283 Posts
    Quote Originally Posted by ross_37 View Post
    Hi
    I am trying to setup the BBC Back sat on 27.5w on my Zgemma H9S, l am looking for the plugin -oscam-ymodv18-56_openvix_all.ipk to install

    Can anyone assist me with the location where l might find the plugin
    Why? You don‘t need it - normal oscam latest works fine (and Yes, I access 27.5W)
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .........DVB-S2X into 90cm dish (27.5W)
    Edision Osmio 4K using Legacy ports on multiswitches
    Octagon SF8008 DVB-S2X tuner using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K
    Zgemma H9Combo legacy ports on multiswitches
    Multibox

  4. The Following 4 Users Say Thank You to twol For This Useful Post:

    Andy_Hazza (20-07-19),cactikid (20-07-19),lespat (31-07-19),ross_37 (20-07-19)

  5. #3
    Member

    Join Date
    Aug 2011
    Location
    Notts.
    Posts
    40
    Thanks
    14
    Thanked 2 Times in 1 Post
    I have also been trying to sort out 27.5w on a Zgemma H7s using Openvix, but failing. A step by step guide would be useful as to how you did it on a arm receiver? Which oscam, keys, config, + anything else needed to know?

  6. #4
    Forum Supporter
    Donated Member


    Join Date
    Jun 2010
    Posts
    2,139
    Thanks
    701
    Thanked 279 Times in 260 Posts
    But is one on a new image which has the latest plugins or older image and non working older version?

  7. #5
    ViX Beta Tester twol's Avatar

    Join Date
    Apr 2012
    Posts
    4,976
    Thanks
    648
    Thanked 1,669 Times in 1,283 Posts
    Quote Originally Posted by lespat View Post
    I have also been trying to sort out 27.5w on a Zgemma H7s using Openvix, but failing. A step by step guide would be useful as to how you did it on a arm receiver? Which oscam, keys, config, + anything else needed to know?
    All the main images now support access to this provider without the tricky code or fancy Oscam that was needed 7 years ago.

    Without wanting to push another WEB site, as you probably know if you google 27.5W there is an extensive thread on this other Images forum that specifies in minute detail the requirements - and all you need is the patience to read the last 15 pages - not from the start in 2012!

    Basically all you need is:

    1. constant.cw
    2. modded lamedb for 27.5W portion (see 4 below)
    3. oscam.server with added BISS reader that uses the constant.cw
    4. a standard Oscam emu, and simply add a BISS (cw) reader and a flag on lamedb file, C:2600

    Code:
    [reader]
    label                         = BISS
    protocol                      = constcw
    device                        = /etc/tuxbox/config/constant.cw
    caid                          = 2600
    group                         = 1
    constant.cw
    Code:
    2600:000000:1100:01F4:1FFF::XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX ;BeeBeeCee N
    2600:000000:1044:0064:1FFF::XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX ;BeeBeeCee 1
    ....
    there are full copies of the required constant.cw on other web sites.
    Last edited by twol; 21-07-19 at 10:52.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .........DVB-S2X into 90cm dish (27.5W)
    Edision Osmio 4K using Legacy ports on multiswitches
    Octagon SF8008 DVB-S2X tuner using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K
    Zgemma H9Combo legacy ports on multiswitches
    Multibox

  8. The Following 3 Users Say Thank You to twol For This Useful Post:

    lespat (21-07-19),ross_37 (21-07-19),Sicilian (21-07-19)

  9. #6
    Member

    Join Date
    Aug 2011
    Location
    Notts.
    Posts
    40
    Thanks
    14
    Thanked 2 Times in 1 Post
    Thank you for this. I have followed that thread mentioned which I found confusing and didn't work for me with a previous box. I have managed to achieve 27.5w on a Edision OS Nino Pro (mips box)using Cccam 2.3.0 with edited lamedb and .cfg file. That seemed straight forward but this Zgemma box using Oscam has given me problems before. Is it because I tried to use the emu file? So frustrating when other closed source boxes work with just the latest software installed!

    Edit: Just had a look back on the other site and "they" are still talking about adding the 3 files from years ago?
    Last edited by lespat; 21-07-19 at 11:14.

  10. #7
    ViX Beta Tester twol's Avatar

    Join Date
    Apr 2012
    Posts
    4,976
    Thanks
    648
    Thanked 1,669 Times in 1,283 Posts
    Quote Originally Posted by lespat View Post
    Thank you for this. I have followed that thread mentioned which I found confusing and didn't work for me with a previous box. I have managed to achieve 27.5w on a Edision OS Nino Pro (mips box)using Cccam 2.3.0 with edited lamedb and .cfg file. That seemed straight forward but this Zgemma box using Oscam has given me problems before. Is it because I tried to use the emu file? So frustrating when other closed source boxes work with just the latest software installed!
    If you have an edited lamedb that works then protect it .... the biggest issue I have had is with the lamedb being corrupted when copied back to the receiver after editing... I even had to use the Windows Notepad++ utility as my linux(Ubuntu) editors corrupted the lamedb.
    The rest, once you have the constant.cw copied over is just dead easy.
    On boot up/restart it usually takes a little while before the 27.5W channels are picked up .... not sure if thats the OScam start delay or just my tuners.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .........DVB-S2X into 90cm dish (27.5W)
    Edision Osmio 4K using Legacy ports on multiswitches
    Octagon SF8008 DVB-S2X tuner using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K
    Zgemma H9Combo legacy ports on multiswitches
    Multibox

  11. The Following 2 Users Say Thank You to twol For This Useful Post:

    lespat (21-07-19),ross_37 (21-07-19)

  12. #8
    Member

    Join Date
    Aug 2011
    Location
    Notts.
    Posts
    40
    Thanks
    14
    Thanked 2 Times in 1 Post
    I also used the Notepad++ to edit the lamedb successfully and as I said all worked fairly simply on Cccam. With Oscam, I believe I need a config file with your reader in. Where do I get that from and where do I put it? I need a .cw file and again where do I get it and where do I put it? Sounds like that's all I need. These questions may seem elementary once youv'e done it but I have read so much contradiction in the past and tried so many times with Oscam... it must be me?

  13. #9
    ViX Beta Tester twol's Avatar

    Join Date
    Apr 2012
    Posts
    4,976
    Thanks
    648
    Thanked 1,669 Times in 1,283 Posts
    The 1st code block above is the oscam.server file, it goes in etc/tuxbox/config with the constant.cw (if you use the above reader as is)
    If you google 27.5W and constant.cw you will find current file with keys.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .........DVB-S2X into 90cm dish (27.5W)
    Edision Osmio 4K using Legacy ports on multiswitches
    Octagon SF8008 DVB-S2X tuner using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K
    Zgemma H9Combo legacy ports on multiswitches
    Multibox

  14. The Following 2 Users Say Thank You to twol For This Useful Post:

    lespat (31-07-19),ross_37 (21-07-19)

  15. #10
    Member

    Join Date
    Aug 2011
    Location
    Notts.
    Posts
    40
    Thanks
    14
    Thanked 2 Times in 1 Post
    Have I understood it right, that I need a constant.cw file with the keys in instead of a SoftCam.Key file I used in the Cccam setup?

  16. #11
    ViX Beta Tester twol's Avatar

    Join Date
    Apr 2012
    Posts
    4,976
    Thanks
    648
    Thanked 1,669 Times in 1,283 Posts
    With the setup as above Yes .... with OScam I think its the simplest setup ... you basically have 2 connected files the oscam reader and the constant.cw file which is referenced by the reader.
    Also means that if you use Oscam for anything else, you just add the readers for them
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .........DVB-S2X into 90cm dish (27.5W)
    Edision Osmio 4K using Legacy ports on multiswitches
    Octagon SF8008 DVB-S2X tuner using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K
    Zgemma H9Combo legacy ports on multiswitches
    Multibox

  17. The Following User Says Thank You to twol For This Useful Post:

    lespat (31-07-19)

  18. #12
    Member

    Join Date
    Aug 2011
    Location
    Notts.
    Posts
    40
    Thanks
    14
    Thanked 2 Times in 1 Post
    Thanks, just got to get my head in gear and go for it!

  19. #13
    Junior Member c31's Avatar

    Join Date
    Mar 2017
    Posts
    4
    Thanks
    0
    Thanked 1 Time in 1 Post
    I thought you could not use openvix on zgemma I may be wrong

  20. #14
    ViX Beta Tester twol's Avatar

    Join Date
    Apr 2012
    Posts
    4,976
    Thanks
    648
    Thanked 1,669 Times in 1,283 Posts
    Quote Originally Posted by c31 View Post
    I thought you could not use openvix on zgemma I may be wrong
    The new boxes like h7/h9 etc (see my signature) are all supported
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .........DVB-S2X into 90cm dish (27.5W)
    Edision Osmio 4K using Legacy ports on multiswitches
    Octagon SF8008 DVB-S2X tuner using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K
    Zgemma H9Combo legacy ports on multiswitches
    Multibox

  21. The Following 3 Users Say Thank You to twol For This Useful Post:

    abu baniaz (29-07-19),lespat (31-07-19),Sicilian (22-07-19)

  22. #15
    Forum Supporter
    Donated Member
    Ashley69's Avatar

    Join Date
    Feb 2015
    Posts
    1,097
    Thanks
    206
    Thanked 289 Times in 245 Posts
    Yes. With the newer models you can. See World of satellite shop for details.
    Octagon SF8008 4K, VU+Duo 2..
    Edision OS MINI,

  23. The Following User Says Thank You to Ashley69 For This Useful Post:

    Sicilian (22-07-19)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.