Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 1 of 1

Thread: How to flash online Zgemma H9 Combo & H9 Twin latest image using Multiboot Recovery menu into either of the Four Multiboot partitions

  1. #1
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts

    Thumbs up How to flash online Zgemma H9 Combo & H9 Twin latest image using Multiboot Recovery menu into either of the Four Multiboot partitions

    This is a very simple basic guide of how to use the Zgemma H9 Combo multiboot recovery menu to Multiboot and flash supported images online.

    Note your Zgemma H9 Combo must have a hard wired network connection.

    1) Power on the Zgemma H9 Combo, as soon as you power on HOLD DOWN TOP LEFT POWER BUTTON on the remote.

    2) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.


    3) On the next screen select 'Flash online image' and press OK on the remote.


    4) On the next screen you can select various team images for online flashing. Currently OpenATV 6.2 & 6.3, OpenPLi7.x, OpenViX 5.2 and OpenNFR 6.3. Choose which image you'd like to flash and Press OK on the remote. You will then see a downloading progress screen. For the purpose of this guide we are flashing OpenATV 6.2 to Slot 2, we already have OpenViX 5.2 in slot 1, OpenATV in slot 2 that we are going to re-flash and OpenPLi in Slot 3.




    5) Once the image has download you'll see the screen below giving you Four image slots. Remember which slot you are currently booting from and have setup. Flashing to that slot WILL REFLASH that slot, you will loose everything you have setup in that slot. We have setup OpenViX in Slot 1, for this guide we are re-flashing OpenATV 6.2 to Slot 2 and we have OpenPLi already flashed to slot 3. Select Slot 2 and press ok on the remote.




    6) Once completed you can select which image you'd like to boot into. OpenATV is in Slot 2, select slot 2 and press ok on the remote.


    7) Now if you would like to boot into say OpenViX in slot 1 you do either either use the built in Multiboot system of whatever images you have flashed or press Menu > Standby /Restart > Restart > as soon as TV screen goes blank HOLD DOWN TOP LEFT POWER BUTTON on the remote. Wait for the Multiboot recovery menu, then select which image you'd like to boot into.


    Thats it, very simple and no USB sticks required.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  2. The Following 2 Users Say Thank You to Sicilian For This Useful Post:

    2853rob (20-08-19),Ktosiu (11-10-19)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.