This is a very simple basic guide of how to use the Maxytec Multibox multiboot recovery menu to Multiboot and flash supported images online.

Note your Maxytec Multibox must have a hard wired network connection.

1) Power on the Maxytec Multibox, as soon as you power on HOLD DOWN TOP LEFT POWER BUTTON on the remote.

2) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.


3) On the next screen select 'Flash online image' and press OK on the remote.


4) On the next screen you can select various team images for online flashing. Currently OpenATV 6.2 & 6.3, OpenPLi7.x, OpenViX 5.2 and OpenNFR 6.3. Choose which image you'd like to flash and Press OK on the remote. You will then see a downloading progress screen. For the purpose of this guide we are flashing OpenATV 6.2 to Slot 2, we already have OpenViX 5.2 in slot 1, OpenATV in slot 2 that we are going to re-flash and OpenPLi in Slot 3.




5) Once the image has download you'll see the screen below giving you Four image slots. Remember which slot you are currently booting from and have setup. Flashing to that slot WILL REFLASH that slot, you will loose everything you have setup in that slot. We have setup OpenViX in Slot 1, for this guide we are re-flashing OpenATV 6.2 to Slot 2 and we have OpenPLi already flashed to slot 3. Select Slot 2 and press ok on the remote.




6) Once completed you can select which image you'd like to boot into. OpenATV is in Slot 2, select slot 2 and press ok on the remote.


7) Now if you would like to boot into say OpenViX in slot 1 you do either either use the built in Multiboot system of whatever images you have flashed or press Menu > Standby /Restart > Restart > as soon as TV screen goes blank HOLD DOWN TOP LEFT POWER BUTTON on the remote. Wait for the Multiboot recovery menu, then select which image you'd like to boot into.


Thats it, very simple and no USB sticks required.