Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: HDD and USB muddled up when box powered on

  1. #1

    Title
    Senior Member
    Join Date
    Jul 2011
    Posts
    339
    Thanks
    112
    Thanked 42 Times in 37 Posts

    HDD and USB muddled up when box powered on

    When my Zgemma H7S is powered on quite often the USB stick and the hdd are muddled up. To solve this problem I quite often have to remove the stick, reboot the box and then plug the stick in again when Vix has started.

    Is there a way that I can permanently avoid this problem perhaps by changing fstab?

  2. #2
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Why you have an external HDD & USB flash drive? Can’t you just make do with the HDD?


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  3. #3
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Use MountManager
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  4. The Following User Says Thank You to twol For This Useful Post:

    Sicilian (15-06-19)

  5. #4

    Title
    Senior Member
    Join Date
    Jul 2011
    Posts
    339
    Thanks
    112
    Thanked 42 Times in 37 Posts
    Quote Originally Posted by Andy_Hazza View Post
    Why you have an external HDD & USB flash drive? Can’t you just make do with the HDD?
    Thanks for all the replies.

    The HDD is internal. I have a theory that when power is applied to the box it finds the USB stick first and makes that /media/hdd regardless of anything I do. If I stop using a USB flash drive where would I keep my epg.dat and picons?

    I could only add network drives with mount manager.

  6. #5

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2010
    Posts
    3,007
    Thanks
    1,347
    Thanked 427 Times in 391 Posts
    On other boxes i used usb stick for epg and hdd for movies.Stick up a screenshot of storage devices to make sure they are named and sized correctly.
    Are you powering off the box completely or just using remote to send to standby?

  7. #6

    Title
    Junior Member
    Join Date
    Jun 2019
    Posts
    3
    Thanks
    1
    Thanked 1 Time in 1 Post
    Mount the hdd and the stick in fstab. In this way box allways found this devices on same place.

  8. #7

    Title
    Junior Member
    Join Date
    Jun 2019
    Posts
    3
    Thanks
    1
    Thanked 1 Time in 1 Post
    Mount the hdd and the stick in fstab with UUID. In this way box allways found this devices on same place.

  9. The Following User Says Thank You to zeini For This Useful Post:

    machare (15-06-19)

  10. #8
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,645
    Thanks
    23,575
    Thanked 26,044 Times in 7,633 Posts
    As post 3 above, Blue button > ViX > Mount manager.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Follow us on Twitter 0penViX
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  11. The Following User Says Thank You to Sicilian For This Useful Post:

    machare (15-06-19)

  12. #9
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Quote Originally Posted by machare View Post
    Thanks for all the replies.

    The HDD is internal. I have a theory that when power is applied to the box it finds the USB stick first and makes that /media/hdd regardless of anything I do. If I stop using a USB flash drive where would I keep my epg.dat and picons?

    I could only add network drives with mount manager.
    Personally I would store your epg.dat to your internal HDD and store your picons to your internal flash as this receiver has plenty of flash storage.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  13. The Following User Says Thank You to Andy_Hazza For This Useful Post:

    machare (15-06-19)

  14. #10
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,771
    Thanks
    235
    Thanked 1,656 Times in 1,305 Posts
    Quote Originally Posted by machare View Post
    The HDD is internal. I have a theory that when power is applied to the box it finds the USB stick first and makes that /media/hdd regardless of anything I do.
    All of the I/O buses are queried in parallel and the resulting device file names depend on the order of replies, which isn't necessarily constant. (I have a box with an internal M.2 drive and an external USB drive and it's roughly 50/50 as to which way round they show up on a reboot).
    As has been noted, use MountManager to mount them. This will mount them using UUID and then the actually ordering of device file names won't matter.
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  15. The Following User Says Thank You to birdman For This Useful Post:

    machare (15-06-19)

  16. #11
    bellejt's Avatar
    Title
    Senior Member
    Join Date
    Dec 2013
    Posts
    1,721
    Thanks
    58
    Thanked 316 Times in 272 Posts
    as Andy says .I do this for years now on my duo2 and working fine. No need for extra usb sticks
    VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
    Triax 88 cm rotor single LNB 30 E- 40 W
    1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E

  17. The Following User Says Thank You to bellejt For This Useful Post:

    Andy_Hazza (15-06-19)

  18. #12

    Title
    Senior Member
    Join Date
    Jul 2011
    Posts
    339
    Thanks
    112
    Thanked 42 Times in 37 Posts
    Quote Originally Posted by zeini View Post
    Mount the hdd and the stick in fstab with UUID. In this way box allways found this devices on same place.
    Now I know a use for UUIDs! That works fine. Thank you very much.

  19. The Following User Says Thank You to machare For This Useful Post:

    zeini (15-06-19)

  20. #13
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,383
    Thanks
    987
    Thanked 2,888 Times in 2,243 Posts
    Quote Originally Posted by machare View Post
    Now I know a use for UUIDs! That works fine. Thank you very much.
    Of course you could always have used the ViX MountManager! Far simpler for most people.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  21. #14

    Title
    Junior Member
    Join Date
    Jun 2019
    Posts
    3
    Thanks
    1
    Thanked 1 Time in 1 Post
    Fine, if this is working.
    But I also think, on Zgemma H7 you don't need an USB-stick for epg and so on. Your box have 4GB Flash memory. And this is more than enough, even with 4 images on the box.

  22. #15
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Quote Originally Posted by zeini View Post
    Fine, if this is working.
    But I also think, on Zgemma H7 you don't need an USB-stick for epg and so on. Your box have 4GB Flash memory. And this is more than enough, even with 4 images on the box.
    Not advisable to store epg.dat to the flash on any receiver.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.